Brush Tinted P40SC Conical Series

[HRE Wheels]

Thought I'd share some studio photos of the new P40SC Conical Series in Brush Tinted.

Sample wheel weights, may vary by fitment
19x8.5 ET25- 21.4 lbs
19x10 ET36- 22.2 lbs
19x12 ET60- 23 lbs
20x9 - 21.4 lbs
20x10 - 22 lbs
20x11 - 22.4 lbs

P40SC Series | HRE Performance Wheels (http://www.hrewheels.com/category/street/street-collection/p40sc-series/)

http://farm8.staticflickr.com/7144/6831424073_35dbd08443_z.jpg (http://www.flickr.com/photos/hrewheels/6831424073/)
P40SC Brush Tinted (http://www.flickr.com/photos/hrewheels/6831424073/) by HRE Wheels (http://www.flickr.com/people/hrewheels/), on Flickr

http://farm8.staticflickr.com/7032/6831423791_b5e121692b_z.jpg (http://www.flickr.com/photos/hrewheels/6831423791/)
P43SC Brush Tinted (http://www.flickr.com/photos/hrewheels/6831423791/) by HRE Wheels (http://www.flickr.com/people/hrewheels/), on Flickr

http://farm8.staticflickr.com/7147/6831424265_afe26d3d78_z.jpg (http://www.flickr.com/photos/hrewheels/6831424265/)
P45SC Brush Tinted (http://www.flickr.com/photos/hrewheels/6831424265/) by HRE Wheels (http://www.flickr.com/people/hrewheels/), on Flickr

[jran76]

Wow. I want those P40SC's in the brushed tinted clear pretty bad. Must resist.... Ironically, I just asked TAG for a quote on these in this finish yesterday.

[Stereodude]

How durable is the brushed finish? Are they going to end up shiny after they're cleaned a few times, or is the brushed finish under a clear coat?

[jran76]

The wheels are brushed, and then clear-coated. So, the brushed finish is pretty well protected. I also think that HRE uses a type of powdercoat for the clear which is more durable than a traditional clear-coat (I am not 100% sure on this, but I seem to remember seeing it somewhere).

I had a set of brushed iForged wheels that had a regular paint clear-coat and it was not all that durable. They stated it would last 4 years and it lasted less than half of that. However, that was some time ago and I know there have been some improvements in this area recently, and I also trust that HRE uses the best of the best....

A lot of it will have to do with what the wheels are exposed to. We don't have to worry about salt and chemicals on the road too much here, and I would only recommend cleaning the wheels by hand with normal car wash supplies (just like you would your paint). Wheel cleaners and stuff like that are big no-no for me.

[HRE Wheels]

The wheels are brushed, and then clear-coated. So, the brushed finish is pretty well protected. I also think that HRE uses a type of powdercoat for the clear which is more durable than a traditional clear-coat (I am not 100% sure on this, but I seem to remember seeing it somewhere).

I had a set of brushed iForged wheels that had a regular paint clear-coat and it was not all that durable. They stated it would last 4 years and it lasted less than half of that. However, that was some time ago and I know there have been some improvements in this area recently, and I also trust that HRE uses the best of the best....

A lot of will have to do with what the wheels are exposed to. We don't have to worry about salt and chemicals on the road too much here, and I would only recommend cleaning the wheels by hand with normal car wash supplies (just like you would your paint). Wheel cleaners and stuff like that are big no-no for me.

That is correct. Our standard finishes are all powder coated. Powder coating is much more durable than painting.

All our Brushed and Brushed Tinted use a powder clear coat. You will not have issues with it and its very easy to keep clean. Simple soapy water.

Powder coating takes longer and is more costly, but it's worth it for a high quality finish that lasts.

Our street wheels are backed by 2 year finish warranty and a lifetime structural warranty. You can rest easy driving on a set of HRE Wheels.

[2011_S4]

These look great!! Guess I'll be selling that kidney sooner than later.

[Alex@TAG]

Wow. I want those P40SC's in the brushed tinted clear pretty bad. Must resist.... Ironically, I just asked TAG for a quote on these in this finish yesterday.

Josh, Replied to your email this morning... :) Lets do it! What are you waiting forrrrrrrrrrr!

[Alex@TAG]

Our street wheels are backed by 2 year finish warranty and a lifetime structural warranty. You can rest easy driving on a set of HRE Wheels.

MMMM... What a warranty :)

Everyone, Please PM me for special Audizine Pricing on all HRE wheels!

[jran76]

Josh, Replied to your email this morning... :) Lets do it! What are you waiting forrrrrrrrrrr!

Powerball!

Thanks Alex. I'll get back to you shortly.

[richib86]

hmm i was gunna do ADV's but i really dig the P43SC's maybe ill do those instead

[John@TAG]

hmm i was gunna do ADV's but i really dig the P43SC's maybe ill do those instead


http://www.madtomatoe.com/wp-content/uploads/2011/03/Facebook-Like-Button-big.jpg

Let me know if we can help you at all, we have some nice AZ special pricing on HRE :)

[Anthony]

I sure do love those P45SC five-spokers! [:D]

[Brick Oven]

hmm i was gunna do ADV's but i really dig the P43SC's maybe ill do those instead

Would love to see those on a B8! Do eeet

[richib86]

shoot me a quote for 19x9.5 and 19x10
http://www.madtomatoe.com/wp-content/uploads/2011/03/Facebook-Like-Button-big.jpg

Let me know if we can help you at all, we have some nice AZ special pricing on HRE :)

[richib86]

please lol
http://www.madtomatoe.com/wp-content/uploads/2011/03/Facebook-Like-Button-big.jpg

Let me know if we can help you at all, we have some nice AZ special pricing on HRE :)

[John@TAG]

shoot me a quote for 19x9.5 and 19x10

Sent your way!

[RavinJetta]

Loving the P40SC in that finish.

[HRE Wheels]

Loving the P40SC in that finish.

Joel, let me know :)

[Snyper886]

hmm i was gunna do ADV's but i really dig the P43SC's maybe ill do those instead

Was thinking the exact same thing! Gorgeous wheels though it's a hard choice against ADV TS...

[HRE Wheels]

Maybe these pictures will help.

Monster Tajima Special Edition P43S at Pikes Peak

http://farm8.staticflickr.com/7010/6649409141_e594b136c4_z.jpg (http://www.flickr.com/photos/hrewheels/6649409141/)
Monster_Tajima_Pikes_Peak_2011_HRE_P43S_Special_Wi n (http://www.flickr.com/photos/hrewheels/6649409141/) by HRE Wheels (http://www.flickr.com/people/hrewheels/), on Flickr
http://farm8.staticflickr.com/7012/6649408335_f39a6db4e8_z.jpg (http://www.flickr.com/photos/hrewheels/6649408335/)
Suzuki SX4 Monster Tajima Pikes Peak 2011 (http://www.flickr.com/photos/hrewheels/6649408335/) by HRE Wheels (http://www.flickr.com/people/hrewheels/), on Flickr

[richib86]

Lon got anymore pictures of the p43sc mounted up? im about to place my order for these today in the brushed tinted clear finish

[Psalm40]

Perfect! I thought about it seriously, but they are a bit too rich for my blood! I wussed out and ordered a bit cheaper set....I really hope I don't regret it...