PDA

View Full Version : Block breather troubles



EuroSwag
02-08-2012, 02:10 PM
Bought the block breather adapter from 034, AEB motor, using stock o ring and clip when I put the clip in the breather has a fair amount of play still. Anything I can do to make this fit right?

bmx_a4
02-08-2012, 05:28 PM
Bought the block breather adapter from 034, AEB motor, using stock o ring and clip when I put the clip in the breather has a fair amount of play still. Anything I can do to make this fit right?

You really, really have to push that thing down in there to get it to seat all the way before putting the clip in. It can be a real pain sometimes, I know. lol

Seerlah
02-08-2012, 05:34 PM
The 034 adapter comes with an o-ring. The B6 guys had this issue also, and 034 has an o-ring to fix that issue. Seems that you will need the proper o-ring, depending on which vehicle you have. Contact 034 and they will sort you out. But you should have been provided an o-ring with the adapter. I was.

EuroSwag
02-08-2012, 05:57 PM
Ill give them a PM about it, maybe I can just shave it if the stock one is too thick.

Seerlah
02-08-2012, 06:57 PM
I was wrong. It was actually the retaining clip that caused the issue with the later B6 guys, and 034 offers a new retaining clip for them (so the thread lead me to believe). But my adapter def came with new o-ring.

http://www.audizine.com/forum/showthread.php/457838-034-Motorsport-Breather-Kit-Review?highlight=review