Post your wheel/tire setup with pictures and information...

[FROZEN337]

http://i190.photobucket.com/albums/z274/FROZEN337/08F46CAB-6D62-4CB2-B502-3C45C449475D-31829-000010DE2BA2E579.jpg

http://i190.photobucket.com/albums/z274/FROZEN337/36F06FBF-BDFC-4613-AB0B-2C255C587992-31829-000010DEDB573DCE.jpg

2001 4.2: ST Coils, Privat Kups 18X9.5 ET30, 10mm spacers on the front, 12mm on the rear. Falken 512 225/40/18
Need adjustable upper control arms to get the camber right, then spin the coils down some, done

[Riktnr08]

Have to ask, why is the saloon so popular in the US? Here in Europe it's like 80% of the Audis Avant. But you guys have good taste in mods on the cars!

Sorry for of topic and bad English.

[NikkiTurbo]

Have to ask, why is the saloon so popular in the US? Here in Europe it's like 80% of the Audis Avant. But you guys have good taste in mods on the cars!

Sorry for of topic and bad English.

The avants are more popular it's just we didn't get as many of them.

[CALL AAA]

Your English is better than 1/2 of the Americans on the internet. Don't apologize!

The large number of sedans (saloons) here on the forums represents what is available here in the United States. We get mostly sedans, and a few wagons. Sometimes we don't get a choice. With the C5 S6, we only got it in avant form. We also get a much more limited choice of engines. For the C5s, we only got the 2.7 biturbo V6, 2.8 V6, 3.0 V6, 4.2 V8 and 4.2 biturbo V8. We got no TDIs and none of the smaller engines that were available in Europe.

[Riktnr08]

Thx! Ok it's like we got non off the cool US cars we got some shitty ones here. You guys should be happy to miss out on the TDI modells from this time. 2.5TDI Brrrrrrrr :)

Ok I'm going too be quiet now whit my off topic talk.

[canadianA4B7]

Pulled the trigger earlier this evening bought a set of rotiform NUE 19x8.5 35et. Once i have them a set of 245 45 19s will be ordered an then install them onto the AR. Shud be a nice setup. Pictures to follow.

[Douglasrkline]

Nice^^ Can't wait for pictures. I am waiting on my VMR 705's to show up for my AR. 19x9.5 gunmetal with 255 45 19 Pilot Sports.

[canadianA4B7]

^^. Im not sure if i shud go w that large of a tire, 255 45 19 will put me over 5% larger then stock. So ive been trying to find pics of an AR with both setups. Ill keep looking thou mayb ill find something.

[Douglasrkline]

http://www.audizine.com/forum/showthread.php/341175-Allroad-Appreciation-Thread/page10?highlight=allroad+pictures.

Nogaro Nitwit's car has 255's. I think they are perfect :)

[4rings2turbos]

http://www.audizine.com/forum/showthread.php/341175-Allroad-Appreciation-Thread/page10?highlight=allroad+pictures.

Nogaro Nitwit's car has 255's. I think they are perfect :)

I absolutely agree! But his aspect ratio is 40, so 255/40/19. The sidewall height difference between 255/40 & 255/45 is almost 13mm.

[Douglasrkline]

My typo. I wanted to say 255 40 19 :) Thanks 4 rings

[canadianA4B7]

Ok so did a lil searching a
255 45 19 will be 4.9% larger then stock.
255 40 19 is only 1% larger then stock
245 45 19 is 3.3% larger then stock
275 40 19 is 3.4% larger then stock and 1.2" wider.
So if im not mistaken any of these can be acceptable? Those 255 40 19 look really nice but i wud like a bit more sidewall, some shitty roads here and odly high driveway enterences.

[4rings2turbos]

My typo. I wanted to say 255 40 19 :) Thanks 4 rings

You got it! [up]

I run staggered and have both 245/45/19 and 275/40/19 for the exact reasons you stated, wanted a bit beefier look and some protection for my 19" wheels and they definitely do the job.

[ENDEE666]

http://www.audizine.com/forum/showthread.php/341175-Allroad-Appreciation-Thread/page10?highlight=allroad+pictures.

Nogaro Nitwit's car has 255's. I think they are perfect :)

Agree 1000%, that car looks sick. Makes me wish myy other car was an Allroad instead of an XC70.. But I knew the AR would become a mod-fest.

[canadianA4B7]

You got it! [up]

I run staggered and have both 245/45/19 and 275/40/19 for the exact reasons you stated, wanted a bit beefier look and some protection for my 19" wheels and they definitely do the job.

And yer running staggered wheels? 8.5 fronts and 9.5 rears? I like what youve done the diameter of both is 27.7" and the wider wheels out back. I think ive come to decide what im gonna go with. Thanx 4 rings. Ive got 19x8.5s gonna go with setup u suggested.

[v8a6]

R8 v10 replicas
19x8.5
Offset: stock et45
Final offset with spacers: et20 rear et30 front
255/35/19
H&R coilovers with a good drop
Modifications if needed: roll, roll, roll your boat, gently down the stream

25mm rear spacers
http://gp1.pinkbike.org/p4pb9356100/p4pb9356100.jpg
http://gp1.pinkbike.org/p4pb9356048/p4pb9356048.jpg
http://gp1.pinkbike.org/p4pb9356058/p4pb9356058.jpg
http://gp1.pinkbike.org/p4pb9356067/p4pb9356067.jpg
http://gp1.pinkbike.org/p4pb9356053/p4pb9356053.jpg
http://gp1.pinkbike.org/p4pb9356052/p4pb9356052.jpg

Also, I test fit one of my other wheels on the rear with the 25mm spacer. It was beyond tight. Small chance it might fit with some more camber dialed in.

Zenetti
20x10
Offset: stock et38
Final offset with spacers: et13 rear
245/30/20
H&R coilovers with a good drop
Modifications if needed: rear liner trimmed

http://gp1.pinkbike.org/p4pb9356073/p4pb9356073.jpg
http://gp1.pinkbike.org/p4pb9356080/p4pb9356080.jpg
http://gp1.pinkbike.org/p4pb9356081/p4pb9356081.jpg
http://gp1.pinkbike.org/p4pb9356093/p4pb9356093.jpg
http://gp1.pinkbike.org/p4pb9356086/p4pb9356086.jpg

this is how the rears looked previously, with no 25mm spacer in the rear
http://gp1.pinkbike.org/p4pb8859263/p4pb8859263.jpg

[4rings2turbos]

And yer running staggered wheels? 8.5 fronts and 9.5 rears? I like what youve done the diameter of both is 27.7" and the wider wheels out back. I think ive come to decide what im gonna go with. Thanx 4 rings. Ive got 19x8.5s gonna go with setup u suggested.

Yup yup! I love the look. As long as f&r rolling diameters are within 3% of each other you're good, but my set-up is like .08% difference, low tire pressure or tire wear would make more of a difference than that.

[canadianA4B7]

Yup yup! I love the look. As long as f&r rolling diameters are within 3% of each other you're good, but my set-up is like .08% difference, low tire pressure or tire wear would make more of a difference than that.

Yes im calculatin 1% difference in size, from stock. Im concerned i may look a bit mushroomed in the rear 275 but the size calculator i use says they will fit on my 8.5" rims. Im gonna space my 30ET out 10 f and 15 r but will likely go to 15f/20r. Cannot wait to get these NUE's tuesday nite!

Links to the set i bought.

http://www.audizine.com/classifieds/showproduct.php?product=88706&title=rotiform-nue-19x8-5-and-5x112-with-3-tires&cat=48

http://montreal.kijiji.ca/c-cars-vehicles-auto-parts-tires-tires-rims-Rotiform-NUE-19x8-5-with-tires-W0QQAdIdZ452781822

[v8a6]

Yes im calculatin 1% difference in size, from stock. Im concerned i may look a bit mushroomed in the rear 275 but the size calculator i use says they will fit on my 8.5" rims. Im gonna space my 30ET out 10 f and 15 r but will likely go to 15f/20r. Cannot wait to get these NUE's tuesday nite!

Links to the set i bought.

http://www.audizine.com/classifieds/showproduct.php?product=88706&title=rotiform-nue-19x8-5-and-5x112-with-3-tires&cat=48

http://montreal.kijiji.ca/c-cars-vehicles-auto-parts-tires-tires-rims-Rotiform-NUE-19x8-5-with-tires-W0QQAdIdZ452781822

Sweet! Those are going to look amazing on the AR

[canadianA4B7]

THANX V8A6 i have been looking for 5 spoke wheels, and my first thought on rims to buy even for the A4 was a set of Rotiform NUE's so the oportunity arrived and i was able to get them including tires. 1 is shot. so ill pick up new tires 245 45 19 and 275 40 19 for these and the tires included i will fit onto the Bentley 19x9 rims for the A4.

[v8a6]

so ill pick up new tires 245 45 19 and 275 40 19 for these

YGM

[8520]

2013 s4 wheels. 18x8 et 47. Had to use a 10mm spacers to clear the hp2's and they barely clear. This picture is with no spacers in the rear, but I think I'll add some 15mm spacers later today when I'm adjusting the suspension.

Sorry for the shitty iPhone pic but it's all I've got.

http://img.photobucket.com/albums/v226/got_no_sol/CD5683C5-5E52-479E-BE6D-567C902F8BE7-13837-00000EA5785F702A_zps9e7f8578.jpg

[canadianA4B7]

So i just test fit the rotiform NUE no spacers 19x8.5 35et. In the rain sorry no pic. But to my surprise they fit w no spacers..... Some1 enlighten me on this i thought id need at least 10mm to clear the front caliper? So im excited to no end. And it wont be an issue mounting them... Some1 with more wheel experience give me a yes or no?

[Audiudo]

Spacers may have been suggested to put your wheels more flush since you have an AR. Lower ET's look better since you have all that room with the fenders.

[canadianA4B7]

Spacers may have been suggested to put your wheels more flush since you have an AR. Lower ET's look better since you have all that room with the fenders.

So i shud fit with a 275 rear tire even with no spacers? I hope so. They loked to be about 18mm tucked in the front (test fit) rear i havent checked. It was raining so didnt want to be out there too long. So i hope for a few days i can get around w/out spacers. And then 10mm front 15mm rears spacers. Rims an tires dropped off today. Can install hopefully sat!

[ttboost]

On my RS6, I have 19x9.5 ET29 Volk VR G2's with PSS 275/30/19. Fit perfect. no rubbing anywhere...this is with stock DRC so far.

[canadianA4B7]

Awesome glad to kno that^^^^ i am a bit concerned with the 275 but itll only take 5 bolts to get the final yes or no on fitment. So pics to come!

[canadianA4B7]

19x8.5 Rotiform NUE
245 40 19 fronts and 275 35 19 rears Thanx to V8A6 for the tires.
10mm fronts and 15mm rears had to buy these to get the rears on cuz they would rub the air bags if i had not. ill 15mm the fronts when i can get them off the A4.
402'd down front 16mm rears 13mm may drop the front down i few more.

Pics are at Level 2
http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1726_zpsd843c5ac.jpg

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1728_zpsfcdb135e.jpg

[v8a6]

Looks awesome! Needs moar lower.

Got any pics from the rear? I want to see the 275s from the back

[LakeTahoeQuattr]

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1726_zpsd843c5ac.jpg

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1728_zpsfcdb135e.jpg

Nice looking car!
I have decided I want an allroad. Going from a suburban to a saloon isn't cutting it for me and my dogs.

[canadianA4B7]

Looks awesome! Needs moar lower.

Got any pics from the rear? I want to see the 275s from the back

Pics tomorrow from the back, and the new lower stance. Also hope to grab my 15mm spacers for the front for final ET of 20. finally found my charger for the sony camera tonite. Was messing with the vag-com tonite. Im about 21 fr, 16 rear right now, but i was at 10mm higher on the passengers side and tried 4 times to level it with no avail. I finally got the front pass to be 5mm high the drivers and right rear is still 9mm higher then drivers. It looks fine and quite aggressive loving them wheels and stance.

[4ringAR]

19x8.5 Rotiform NUE
245 40 19 fronts and 275 35 19 rears Thanx to V8A6 for the tires.
10mm fronts and 15mm rears had to buy these to get the rears on cuz they would rub the air bags if i had not. ill 15mm the fronts when i can get them off the A4.
402'd down front 16mm rears 13mm may drop the front down i few more.

Pics are at Level 2
http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1726_zpsd843c5ac.jpg

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSCN1728_zpsfcdb135e.jpg

Looks really good, I had a feeling they would look good on the allroad, though. Any level 1 pics?

Also not as concave as I thought they were

[canadianA4B7]

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSC00636_zpsa5f6d6e5.jpg
LEVEL 1


http://i1171.photobucket.com/albums/r541/canadianA4B7/DSC00634_zps03c4147a.jpg

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSC00637_zpse887a75d.jpg

http://i1171.photobucket.com/albums/r541/canadianA4B7/DSC00638_zpsbf903a65.jpg

All these are level 1, the side you see is actually 8mm lower the passengers side......i cannot get the passengers side to lower for some reason big time piss off. need to check sensors for sure perhaps a block valve? all levels adjust UP and down trough 1-4 but i want the right rear to sit same as left rear but it just wont wanna drop. anyway pics as requested the 275 tires from the back, they are all pics of level 1 so see the LOW.

as for the concave i think Rotiform makes another series that are much more concave. not what i got but i wanted 5 spokes 19" and thats what i got!! they could have some more concave to them yes but im very happy as they are!

[v8a6]

Looks amazing! The rears fill out the fenders nicely. And the wheels really look great with the bigger tire.

[canadianA4B7]

thanx v8a6, it does look sso much nicer with the bigger wheels!!! they match the door blades nice, and i went and had my painter take a look at doin shaved and painted lowers and paint the top all color matched. all in good time but for now it looks great. will space out the front another 5mm to widen a bit more.

[Audi_Tech]

19x10 VMR 710's ET25 (5mm spacer in the rear)
235/35/19's
24.5" FTG on H&R's
Top liner screw removed, fenders not rolled
No rubbing noted so far except during off-camber sloped entrance

Edit: Rim weight is 29.41 lbs and tires are 21.5 lbs for a net weight of 50.91 lbs

http://i596.photobucket.com/albums/tt45/sucka_fucka/DSC00790_zpsef99f512.jpg

http://i596.photobucket.com/albums/tt45/sucka_fucka/DSC00787_zps445a7ab3.jpg

http://i596.photobucket.com/albums/tt45/sucka_fucka/DSC00788_zpsca420552.jpg

[Riktnr08]

Very nice @ Audi_tech

[Audi_Tech]

^ Thx!

[Douglasrkline]

Love it!

[Douglasrkline]

VMR gunmetal 705's.
19 x 9.5
ET 44
25MM H&R spacers (ET19 final offset)
245 / 40 / 19 Michelin Pilot Super Sports

http://i625.photobucket.com/albums/tt339/douglasrkline/018_zps9a4f4ae8.jpg (http://s625.photobucket.com/user/douglasrkline/media/018_zps9a4f4ae8.jpg.html)

http://i625.photobucket.com/albums/tt339/douglasrkline/031-2_zpse94e0910.jpg (http://s625.photobucket.com/user/douglasrkline/media/031-2_zpse94e0910.jpg.html)

http://i625.photobucket.com/albums/tt339/douglasrkline/027-1_zps63fb3e1b.jpg (http://s625.photobucket.com/user/douglasrkline/media/027-1_zps63fb3e1b.jpg.html)

http://i625.photobucket.com/albums/tt339/douglasrkline/019_zps880067e2.jpg (http://s625.photobucket.com/user/douglasrkline/media/019_zps880067e2.jpg.html)

[brownson1]

Factory Original RS6 rims
18x7.5 et20
BFGoodrich G-Force Sport Comp 2's
No fender mods
Perfect fit for me!

http://www.audizine.com/gallery/data/504/medium/image231.jpg

http://www.audizine.com/gallery/data/504/medium/image232.jpg

[chrisaudi4.2]

miro 111...19x9.5 all around 245/35/19 ET20 5x120 Redrill to 5x112 with a 3mm spacer in the front final ET17....and with a 5mm in the Rear final ET15...whith H&R's Race spring.http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpBnPltmPM.jpg[/[URL=http://s569.photobucket.com/user/chrissr20det_photo/media/phpbP436bPM.jpg.html]http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpbP436bPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpBnPltmPM.jpg.html)URL]http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpX9Ql4KPM-1.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpX9Ql4KPM-1.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpngqYAzPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpngqYAzPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpH25DSyPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpH25DSyPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/qw.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/qw.jpg.html)

[euromob]

miro 111...19x9.5 all around 245/35/19 ET20 5x120 Redrill to 5x112 with a 3mm spacer in the front final ET17....and with a 5mm in the Rear final ET15...whith H&R's Race spring.http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpBnPltmPM.jpg[/[URL=http://s569.photobucket.com/user/chrissr20det_photo/media/phpbP436bPM.jpg.html]http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpbP436bPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpBnPltmPM.jpg.html)URL]http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpX9Ql4KPM-1.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpX9Ql4KPM-1.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpngqYAzPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpngqYAzPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpH25DSyPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpH25DSyPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/qw.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/qw.jpg.html)
is that a 4.2 converted to RS4? or is that an RS4? lol.
regardless its fuckin cleannnn. i love it.

[v8a6]

I think you mean RS6

[chrisaudi4.2]

is that a 4.2 converted to RS4? or is that an RS4? lol.
regardless its fuckin cleannnn. i love it.

is a 2000 a6 4.2 converted to Rs6.lol

[NickyAsixx3sixx]

Chris, can u post more pics of your car?

[euromob]

is a 2000 a6 4.2 converted to Rs6.lol

sorry guys i typed it wrong, wasnt thinkin clearly ;)

[klev]

Tomorrow i get my rims, 9x20 and 10,5x20. But what tire size should i use?

[Vinchenzo51]

Tomorrow i get my rims, 9x20 and 10,5x20. But what tire size should i use?

Depends on the offset of the wheel, and what type of car you have.

[klev]

Depends on the offset of the wheel, and what type of car you have.
I forgot to mention that it is a Allroad, the rim has ET 40, but i have several different spacers

[squax]

Hey BlueVr

What kind of clearances do you have? I'm running 8.5x20 et15 wheels right now and by my calculations should be able to squeeze 10's on all four corners of the allroad but certain wheel suppliers tell me 9" is MAX. Your ride looks killer too by the way .

Thanks to all for input.
here is my setup.

19x9.5 et35 with 15mm spacers front and 18mm spacers in rear.

http://img.photobucket.com/albums/v107/gom211/DSC_0119.jpg
http://img.photobucket.com/albums/v107/gom211/DSC_0125.jpg

[Douglasrkline]

Hey BlueVr

What kind of clearances do you have? I'm running 8.5x20 et15 wheels right now and by my calculations should be able to squeeze 10's on all four corners of the allroad but certain wheel suppliers tell me 9" is MAX. Your ride looks killer too by the way .

Thanks to all for input.

9.5 in the front in max without poke (on a 19" rim). 10 in the rear is no problem though. I have 9.5's on my car on all corners and only have .060 clearance from the inside of my rim to the front upright. The outer lip of the rim is flush with the outer edge of the flare. 20's will buy you a little more clearance but i don't think it will be good for another 1/2".

[LososWayA6]

does anyone have adjustable upper control arms on their a6 ? and if so what would to recommend on how to set them?

[LososWayA6]

before you guys flame me, how do yo favorite a post so you dont have to look for it lol? i new to this so bare with me!

[squax]

What effective offset? Thanks.


9.5 in the front in max without poke (on a 19" rim). 10 in the rear is no problem though. I have 9.5's on my car on all corners and only have .060 clearance from the inside of my rim to the front upright. The outer lip of the rim is flush with the outer edge of the flare. 20's will buy you a little more clearance but i don't think it will be good for another 1/2".

[Douglasrkline]

ET 19

[ENDEE666]

does anyone have adjustable upper control arms on their a6 ? and if so what would to recommend on how to set them?


before you guys flame me, how do yo favorite a post so you dont have to look for it lol? i new to this so bare with me!

Yes. Pretty sure FrankA6 has them. They are made by Stern, and I am pretty sure someone mentions them in THIS VERY THREAD!!!! At least make SOME effort. Read this thread.

http://www.purems.com/Products/ST-CAKIT01Stern-Adjustable-Upper-Control-Arm-Kit

[DynamicSound]

Here is my setup on my 2001 2.7t.

Privat Akzent
19" x 9.5"
Offset 30
ST Coilovers
Pulled Front Fenders

http://farm8.staticflickr.com/7293/8745102956_bd045f9c32_c.jpg
http://farm8.staticflickr.com/7284/8743983991_30ae63a3b2_c.jpg
http://farm8.staticflickr.com/7285/8745101740_cb9f9255c1_c.jpg

[koemm over]

18x10 et 9
215/35/18 nankang ns20
front and rear

static[:D]

http://i419.photobucket.com/albums/pp272/davekoemm/null_zpsdc69f303.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zpsdc69f303.jpg.html)

[koemm over]

http://i419.photobucket.com/albums/pp272/davekoemm/null_zps99af816b.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zps99af816b.jpg.html)

http://i419.photobucket.com/albums/pp272/davekoemm/null_zps70710907.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zps70710907.jpg.html)

http://i419.photobucket.com/albums/pp272/davekoemm/null_zps9a86d7ee.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zps9a86d7ee.jpg.html)

my girls car on 18x11 225/40/18
18x8 215/40/18
http://i419.photobucket.com/albums/pp272/davekoemm/null_zps4047c385.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zps4047c385.jpg.html)

[DJPardy]

Thanks guys. It was definitely sweet looking but I had to take them off. It wasn't suitable for the 40 to 50 miles the car is driven daily. It looks like this on a day to day:
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/298586_632908534805_1058043639_n.jpg

Sorry for the crappy instagram pictures. Stock setup is a set of OE Fat5s with factory tires - 20mms in front and 15mms in back. Probably going to throw a 20mm in back too next time I have the wheels off for something because it looks stupid with the rear in more. I rarely drive the car (my girl does) so I haven't gotten the kick to fix the fitment a little.

Any idea what the FTG is in this pic? I know you sold this a while ago but if you remembered by any chance it would be great.

[audi5inline]

BBS CH
19x8.5 32ET, 10mm spacers at the rear
255/35/19
Bridgestones
OEM suspension

https://lh6.googleusercontent.com/-jKBaR2pTqxc/UZpY5mYDFPI/AAAAAAAAAkE/ok_Q-HnPCOs/w864-h652-no/20130520_183930.jpg

https://lh5.googleusercontent.com/-v4_lEx3HzRM/UZpZM_VjH_I/AAAAAAAAAkk/S4y62NL2Ph0/w864-h652-no/20130520_184027.jpg

https://lh4.googleusercontent.com/-SOenvIZVgLw/UZpZFjaboNI/AAAAAAAAAkM/39vO-ES2URg/w864-h652-no/20130520_183942.jpg

https://lh4.googleusercontent.com/-kl4YCrez_d4/UZpZJ5l8xpI/AAAAAAAAAkc/MrHulZlRmiQ/w864-h652-no/20130520_184013.jpg

https://lh4.googleusercontent.com/-llVG0YOBwb4/UZpZHpjTf6I/AAAAAAAAAkU/AOJZSKPdO_A/w864-h652-no/20130520_183954.jpg

[chrisaudi4.2]

here's are a little more pictures of my bebe.lol again running miro 111 19x9.5 all 4 corners 5x120 Et20 Redrill to 5x112 with 245/35/19 all 4 corner with a 3mm spacer in the front Final Et17.and 5mm in the Rear at a Final Et15..........the wheels are plasti dip color red......http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111706.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111706.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111787.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111787.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111790.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111790.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111797.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111797.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111796.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111796.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111480.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111480.jpg.html)

[Widebody4.2]

Chris the car is looking awesome

[ENDEE666]

Yeah man, that looks outstanding!!! What make/model tires are you running?

[Audiudo]

18x10 et 9
215/35/18 nankang ns20
front and rear

static[:D]

http://i419.photobucket.com/albums/pp272/davekoemm/null_zpsdc69f303.jpg (http://s419.photobucket.com/user/davekoemm/media/null_zpsdc69f303.jpg.html)

Wow! [up]

[v8a6]

Chris the car is looking awesome

Yeah, looks amazing.

[NickyAsixx3sixx]

http://img.tapatalk.com/d/13/05/25/ehusa4uh.jpg

Sent from my SCH-I535 using Tapatalk 2

[chrisaudi4.2]

Chris the car is looking awesome
thank you!! (Widebody4.2)

[chrisaudi4.2]

Yeah man, that looks outstanding!!! What make/model tires are you running?
thanks!!! (ENDEE666) the tires name brand are....Federal 595 Evo.

[$teady$upreme]

Please more pics of whole vehicle please[drool]


Rotiform SNA
19x10 et 25 245/35/r19 All 4 corners..

ST coils and 034 adjustable upper control arms

http://i1261.photobucket.com/albums/ii591/maliziaz/Rotiform6_zps7dcdf576.jpg

http://i1261.photobucket.com/albums/ii591/maliziaz/Rotiform5_zps068f3f79.jpg

http://i1261.photobucket.com/albums/ii591/maliziaz/Rotiform3_zps4f6177f7.jpg

http://i1261.photobucket.com/albums/ii591/maliziaz/Rotiform4_zps2f06a906.jpg

[klev]

402 mod
10,5" x 20" TSW Tanaka ET 40
245/35 Yokohama Advan Sport
30mm spacer in front, 20mm in rear. In future i will have 25mm rear


http://i5.photobucket.com/albums/y191/kleiven/DSC_0104.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0104.jpg.html)

http://i5.photobucket.com/albums/y191/kleiven/DSC_0103.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0103.jpg.html)

http://i5.photobucket.com/albums/y191/kleiven/DSC_0101.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0101.jpg.html)

http://i5.photobucket.com/albums/y191/kleiven/DSC_0085.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0085.jpg.html)

http://i5.photobucket.com/albums/y191/kleiven/DSC_0078.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0078.jpg.html)

http://i5.photobucket.com/albums/y191/kleiven/DSC_0075.jpg (http://s5.photobucket.com/user/kleiven/media/DSC_0075.jpg.html)

[280zforce]

402 mod
10,5" x 20" TSW Tanaka ET 40
245/35 Yokohama Advan Sport
30mm spacer in front, 20mm in rear. In future i will have 25mm rear
All that wheel width and only 245mm tires? *smh* You should be using 295-315s on 10.5".

[Vinchenzo51]

All that wheel width and only 245mm tires? *smh* You should be using 295-315s on 10.5".

People like different looks. My 235's are still running great on my 10.5's [:d][up]

[ENDEE666]

People like different looks. My 235's are still running great on my 10.5's [:d][up]

Vin's definition of "running great" below:
http://farm8.staticflickr.com/7276/7666521994_bee1dd1795_o.jpg

Lol, sorry Vin, I had to do it. Still love you & your car..

[VJ's A6]

Vin's definition of "running great" below:
http://farm8.staticflickr.com/7276/7666521994_bee1dd1795_o.jpg

Lol, sorry Vin, I had to do it. Still love you & your car..

Good one Nick.. I was going to post this pic too.

Vin- You know this pics will come up every time you post about stance and wheels specs. [:D]

[Beebster]

2001 A6 4.2


Wheels: Mandrus Wilhelm 19 x 9.5 25et

Tires: Nitto Motivo 275/30/19

http://www.audizine.com/gallery/data/504/medium/IMG_20130607_131028_596.jpg

[OGBULLYLOCDAWG]

^More details!

Tint %? exhaust/tips? coilovers or just springs??

Sweet as hell man

[Vinchenzo51]

I plead the 5th (not enough camber was my issue btw LOL)

[bengone1]

Forged and very lightweight Neuspeed RS-10 19x8" et45 with 25mm H&R spacers for a final of et20. Wearing 245-40-19 Goodyear RSA. http://img.tapatalk.com/d/13/06/19/mepyzyhy.jpghttp://img.tapatalk.com/d/13/06/19/venyny8e.jpghttp://img.tapatalk.com/d/13/06/19/6e5y3u7e.jpg
No, I haven't got around to 420 modding it again. These wheels are due to be replaced/downgraded to these 19x9" et53 beasts.
http://img.tapatalk.com/d/13/06/19/aqa3eha3.jpg

Adaptec brand adapters to even it out using the same Goodyear RSA tires. Pics soon!

[Jayfiniti]

Hi guys, I am new here. I just purchased a 2004 Audi A6 2.7T S line with only 14k miles! I'll be posting pics of it soon. But, i have a quick question, where can I get these tailights?! I love the look. Amazing car man


miro 111...19x9.5 all around 245/35/19 ET20 5x120 Redrill to 5x112 with a 3mm spacer in the front final ET17....and with a 5mm in the Rear final ET15...whith H&R's Race spring.http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpbP436bPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpbP436bPM.jpg.html)

[mavada]

http://i1229.photobucket.com/albums/ee469/mavada1/IMG_0124.jpg (http://s1229.photobucket.com/user/mavada1/media/IMG_0124.jpg.html)

[JediJoker7169]

http://i1229.photobucket.com/albums/ee469/mavada1/IMG_0124.jpg (http://s1229.photobucket.com/user/mavada1/media/IMG_0124.jpg.html)

Not to be a dick, but the thread title is, "Post your wheel/tire setup with pictures and information..." Wheel specs? Suspension specs?

[mavada]

MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres on DRC...

[JediJoker7169]

MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres on DRC...

Thanks! Looks great, by the way.

[A6-owner]

Here's my previous Audi A6 C5 old RS6 Rims. 8,5J 19 ET35. Continental 235/35/19.

http://i1227.photobucket.com/albums/ee425/a6-owner/6.png (http://s1227.photobucket.com/user/a6-owner/media/6.png.html)
http://i1227.photobucket.com/albums/ee425/a6-owner/9.png (http://s1227.photobucket.com/user/a6-owner/media/9.png.html)

[Matt1997]

Good day,

I am in need of technical help with my 1997 Audi A6 2.8 (C4 platform).

I am getting a whining sound from the engine too often now and gets much louder when I turn the steering. The more I turn the wheel, the louder the noise. I even feel an uncomfortable resistance sometimes when turning the steering wheel. I suspect its the power steering pump.

My car still drives like a dream and is very special to me.

Please help me or refer me to a member in the forum community who can give me solid advice on what it is and what I can do.

Thank you!!!

[NickyAsixx3sixx]

Little teaser of what's coming in the next couple days... :)

http://i80.photobucket.com/albums/j173/Durangosickk/1000125_474989115920872_580538698_n.jpg (http://s80.photobucket.com/user/Durangosickk/media/1000125_474989115920872_580538698_n.jpg.html)

[squax]

20x9 ET9 255/35/20 fallen fk453 azenis.
'Real' photo shoot coming soon. http://img.tapatalk.com/d/13/07/05/e6uda4y3.jpghttp://img.tapatalk.com/d/13/07/05/uhe9umuj.jpghttp://img.tapatalk.com/d/13/07/05/myba5uju.jpg

[ENDEE666]

This looks fucking fantastic!! Amazing stance. Fuck I love Allroads... Very well done... ET9!!! Damn wide bodies........


20x9 ET9 255/35/20 fallen fk453 azenis.
'Real' photo shoot coming soon. http://img.tapatalk.com/d/13/07/05/e6uda4y3.jpghttp://img.tapatalk.com/d/13/07/05/uhe9umuj.jpghttp://img.tapatalk.com/d/13/07/05/myba5uju.jpg

[ENDEE666]

Glad this is finally sorted after SOOOO much! Looks perfect!


Little teaser of what's coming in the next couple days... :)

http://i80.photobucket.com/albums/j173/Durangosickk/1000125_474989115920872_580538698_n.jpg (http://s80.photobucket.com/user/Durangosickk/media/1000125_474989115920872_580538698_n.jpg.html)

[Vinchenzo51]

Little teaser of what's coming in the next couple days... :)

http://i80.photobucket.com/albums/j173/Durangosickk/1000125_474989115920872_580538698_n.jpg (http://s80.photobucket.com/user/Durangosickk/media/1000125_474989115920872_580538698_n.jpg.html)

Don't make my mistake! lol i'm serious Nick. Raise that up before driving any distance.

[ENDEE666]

Don't make my mistake! lol i'm serious Nick. Raise that up before driving any distance.

#ohfuck. :D

[OGBULLYLOCDAWG]

Nick, I say that's worth a good 4hrs of staring at the car from different angles once everything is complete.

The 4hrs include driving to a local parking lot good crisp fluorescent lighting and looking at that shit some more (after staring at it in your driveway for like 1 1/2).

I refuse to believe I'm the only one that does this shit! lol

That shit is raw, Nick. [up]


Can't wait for WF so I can creep on all these sexy ass rides!

[NickyAsixx3sixx]

Don't make my mistake! lol i'm serious Nick. Raise that up before driving any distance.

Yep I raised it up haha it was tooo low


#ohfuck. :D

hahah ohhh fuckkk!


Nick, I say that's worth a good 4hrs of staring at the car from different angles once everything is complete.

The 4hrs include driving to a local parking lot good crisp fluorescent lighting and looking at that shit some more (after staring at it in your driveway for like 1 1/2).

I refuse to believe I'm the only one that does this shit! lol

That shit is raw, Nick. [up]


Can't wait for WF so I can creep on all these sexy ass rides!

Thanks man!

[NickyAsixx3sixx]

Miro 111s

225/35R19 Falken FK453 R&R

19x9.5" Miro 111

12mm spacer in the front
10mm spacer in the back

http://img.tapatalk.com/d/13/07/06/yhe8u2am.jpg

Sent from my SCH-I535 using Tapatalk 2

[ratherb1]

Miro 111s

225/35R19 Falken FK453 R&R

19x9.5" Miro 111

12mm spacer in the front
10mm spacer in the back

http://img.tapatalk.com/d/13/07/06/yhe8u2am.jpg

Sent from my SCH-I535 using Tapatalk 2

Looks much better than your old car ....... I'd leave it

[NickyAsixx3sixx]

Looks much better than your old car ....... I'd leave it

You'd leave it? What do you mean?

Sent from my SCH-I535 using Tapatalk 2

[ratherb1]

You'd leave it? What do you mean?

Sent from my SCH-I535 using Tapatalk 2




As far as looks go , car is looking good .....not sure if you were going to do the same as your old car.....

I woulldnt tint the tail lights or tint windows .... Ftg looks good .....maybe just some s6 door blades and your good. [up]

[NickyAsixx3sixx]

As far as looks go , car is looking good .....not sure if you were going to do the same as your old car.....

I woulldnt tint the tail lights or tint windows .... Ftg looks good .....maybe just some s6 door blades and your good. [up]

Oh ok. Yea thanks

Just tinting the Windows. Not dark though. And no tint on the lights

Sent from my SCH-I535 using Tapatalk 2

[OGBULLYLOCDAWG]

Oh ok. Yea thanks

Just tinting the Windows. Not dark though. And no tint on the lights

Sent from my SCH-I535 using Tapatalk 2

And let me spend a little more of your $$$ for you and suggest a face-lifted euro license plate tub [up]

[ENDEE666]

And let me spend a little more of your $$$ for you and suggest a face-lifted euro license plate tub [up]

LMAO! Dude, he eyes mine every time he sees it!! (That Nick lives right near (me) this Nick)

[NickyAsixx3sixx]

LMAO! Dude, he eyes mine every time he sees it!! (That Nick lives right near (me) this Nick)

I am currently planning an attack on your euro tub! hahah

[aysix]

I am currently planning an attack on your euro tub! hahah

Nick your car is rat.


Now dremel my exhaust ports.

[NickyAsixx3sixx]

Nick your car is rat.


Now dremel my exhaust ports.

RAT???? lol the fuckk

and i removed my rear bumper and dremeled them againnnn they look fantastic! come to my shop ill do it for you

[DG4.2]

19*8 ET 35 245/35/19
S5 reps in brown/grey
No spacers, lowered on st coil overs.

http://i1282.photobucket.com/albums/a532/DanGold82/null_zps885ffd8a.jpg

http://i1282.photobucket.com/albums/a532/DanGold82/null_zps10b10742.jpg

[Brunu88]

http://img19.imageshack.us/img19/8945/v4kn.jpg

A6 C5 + AMG wheels 18" 225-35 8.5" front and 255-40 back 8.5"

Low = photoshop LOL

[Kievskiy]

Update:
STR 609 18x9.5, 245/35 front, 255/35 back, half inch spacer front, 1 inch spacer back.
http://i929.photobucket.com/albums/ad137/kievskiy/IMG_3566_zpsae185d63.jpg

[allroad'n]

level 4 and still slammed. these are just the stock 2 peice rims with some studded blizzaks. I'll post some more pics later. don't have any recent ones on my phone http://img.tapatalk.com/d/13/08/05/8e8u8a9a.jpg

Sent from my DROID RAZR HD using Tapatalk 4

[ceki81]

Wheel make/name: TSW SPA
Wheel size: 18x8
Offset: 32
Tire size: 235/40R18 Pirelli PZERO NERO A/S
Suspension: stock
Modifications: None
http://www.audizine.com/gallery/data/628/A63.jpg

[Mecey]

http://img.tapatalk.com/d/13/08/06/enugepeb.jpg

19x10.5 front/rear
Et 27 front/rear
Modified rear wheel back pad for more rear lip.
245/35 falkens

[allroad'n]

18" tsw nuremburgrings.
20mm spacers all around
402'd roughly 20mm


http://img.tapatalk.com/d/13/08/06/8yze4a6y.jpg

Sent from my DROID RAZR HD using Tapatalk 4

[stef2.7t]

Modified rear wheel back pad for more rear lip.

Explain please?

[Mecey]

Explain please?

When Rotiform built the wheels for me they milled the centers of the rear back pad down and used larger lips in the rear. Hence same offset but larger rear lips.

[Korben007]

When Rotiform built the wheels for me they milled the centers of the rear back pad down and used larger lips in the rear. Hence same offset but larger rear lips.

And less brake clearance

[v8a6]

When Rotiform built the wheels for me they milled the centers of the rear back pad down and used larger lips in the rear. Hence same offset but larger rear lips.

Wow, nice.

[Mecey]

And less brake clearance

Correctomondo...

[RS6in907]

What is the offset for 03 Audi RS6? I was planning on getting some vmr v710s 19x9.5+26 rim with 255/35/19 tires. What do you guys think?

[J.B]

What is the offset for 03 Audi RS6? I was planning on getting some vmr v710s 19x9.5+26 rim with 255/35/19 tires. What do you guys think?

stock wheel on US spec RS6 is 18x8.5 ET30

Those wheels will have 9mm less inner clearance and stick out 17mm more on the outside. Not sure if there would be fitment issues. I doubt it, but maybe some rubbing on suspension compression with wheels turned a lot.

Edit: Check this thread out:

http://www.rs6.com/showthread.php/24403-definitive-tire-wheel-and-offset-thread?highlight=wheel+width

[RS6in907]

I measured the gap between tire and fender and it is about 20mm or 2cm so it would be close. The 17 mm on the outside should be close to flush with the fender. I am hoping..

[allroad55]

http://i1133.photobucket.com/albums/m596/ghdatakeuchi55/DSC05209-5_zpsa13a3789.jpg
http://i1133.photobucket.com/albums/m596/ghdatakeuchi55/DSC05197-5_zps94671bde.jpg
http://i1133.photobucket.com/albums/m596/ghdatakeuchi55/pss1_zpsa2df84b2.jpg


19x8.5 +15 without spacer all around

[Kievskiy]

installed a bit smaller tires today,245/35 all around on 18x9.5, 10mm offset on the back, 22.5mm offset on the front. STR609MB rims. Sorry she is a bit dirty.
http://i929.photobucket.com/albums/ad137/kievskiy/Black%20A6/IMG_3597_zps9afa32a5.jpg
http://i929.photobucket.com/albums/ad137/kievskiy/Black%20A6/IMG_3594_zps9eaf2fe9.jpg

[KennyKill]

Cops don't fuck with you because of your headlights?

[A4edwin]

http://img.tapatalk.com/d/13/08/06/enugepeb.jpg

19x10.5 front/rear
Et 27 front/rear
Modified rear wheel back pad for more rear lip.
245/35 falkens
Moar pics!

[Kievskiy]

Nope.

Cops don't fuck with you because of your headlights?

[Vinchenzo51]

Wow, Andrey, thats my favorite setup you've had yet!

[ENDEE666]

I agree with Vin. This looks very good! Did you pull the fenders? Looks it in this pic-



installed a bit smaller tires today,245/35 all around on 18x9.5, 10mm offset on the back, 22.5mm offset on the front. STR609MB rims. Sorry she is a bit dirty.
http://i929.photobucket.com/albums/ad137/kievskiy/Black%20A6/IMG_3597_zps9afa32a5.jpg

[AndiRS6]

Hello,

i´m new on this forum, want to show my setup.

OZ Michelangelo II 19 x 9,5 et 32 front / rear with tyres Dunlop 235/35 R19 . Next days i put spacers 10/15mm front/rear.


http://imageshack.us/a/img109/975/9ksb.jpg (http://imageshack.us/photo/my-images/109/9ksb.jpg/) http://imageshack.us/a/img801/9981/ep40.jpg (http://imageshack.us/photo/my-images/801/ep40.jpg/)


Andi

[Kievskiy]

Vinny and ENDEE, thanx guys, the fenders are rolled and pulled, and will allow me to go lower:)

http://i929.photobucket.com/albums/ad137/kievskiy/IMG_36131_zps03dae988.jpg

[ENDEE666]

Fenders look great, especially in the rear. Used a standard roller?

[Kievskiy]

Thanks, yeah, standard roller and a heat gun, took a while tho but it was well worth it.

Fenders look great, especially in the rear. Used a standard roller?

[Jayfiniti]

Vinny and ENDEE, thanx guys, the fenders are rolled and pulled, and will allow me to go lower:)

http://i929.photobucket.com/albums/ad137/kievskiy/IMG_36131_zps03dae988.jpg

Those tail lights! Where did you get them?

[2001A6]

Allroad55, those Pilot Super Sports rock!! One of the best tires Michelin has made to date.

[Kievskiy]

got them of Ebay, just google led taillights 2000 audi a6 ;)
http://jdmautolights.com/tail-lights-c-463_465_477.html

Those tail lights! Where did you get them?

[bengone1]

Land Rover 19x9" et53 with 36mm 5x112-57.1 to 5x120-66.6 adapters for a final of et17. 245-40-19 Goodyear Eagle RS-A Don't forget the Rover lug nuts, you kinda need em.
http://i402.photobucket.com/albums/pp101/BenOU812/DSC_27281_zpse3e1490f.jpg (http://s402.photobucket.com/user/BenOU812/media/DSC_27281_zpse3e1490f.jpg.html)
http://i402.photobucket.com/albums/pp101/BenOU812/DSC_27291_zpsff865af9.jpg (http://s402.photobucket.com/user/BenOU812/media/DSC_27291_zpsff865af9.jpg.html)

[audi5inline]

BBS CH 19'

https://lh5.googleusercontent.com/-uSoVDCuhmpo/UijUuIwPAuI/AAAAAAAABwQ/sCsjhDdDoWY/w888-h666-no/20130905_194154.jpg

[KennyKill]

How far are those quarters pulled?

[audi5inline]

Those are stock, the s6 has a wide body from the factory

[KennyKill]

Vinny and ENDEE, thanx guys, the fenders are rolled and pulled, and will allow me to go lower:)

http://i929.photobucket.com/albums/ad137/kievskiy/IMG_36131_zps03dae988.jpg

How far out are those Quarters Pulled?

[KennyKill]

Those are stock, the s6 has a wide body from the factory

I forgot to quote the photo in to which I was referring.

[n01]

New to the forum, want to show my set up. Sorry but i can,t figure out how tom post pics.
19"x8.5" Tomason tn4 on continental 255/35/19 with 15mm spacers
[IMG][URL=http://s1287.photobucket.com/user/n01n01/media/IMG-20130811-00131_zpsaac4c581.jpg.html][IMG]
[IMG][URL=http://s1287.photobucket.com/user/n01n01/media/IMG-20130811-00130_zps52354d94.jpg.html][IMG]

[KrautHauler]

New to the forum, want to show my set up. Sorry but i can,t figure out how tom post pics.
19"x8.5" Tomason tn4 on continental 255/35/19 with 15mm spacers
[IMG][URL=http://s1287.photobucket.com/user/n01n01/media/IMG-20130811-00131_zpsaac4c581.jpg.html][IMG]
[IMG][URL=http://s1287.photobucket.com/user/n01n01/media/IMG-20130811-00130_zps52354d94.jpg.html][IMG]

Fixed

http://i1287.photobucket.com/albums/a636/n01n01/IMG-20130811-00131_zpsaac4c581.jpg

http://i1287.photobucket.com/albums/a636/n01n01/IMG-20130811-00130_zps52354d94.jpg

[n01]

Thanks bud.

[Kievskiy]

Maybe about 1cm, only on the top part, (10am-2pm), otherwise they are stocknarrow body quarters.

How far out are those Quarters Pulled?

[StaywagKB]

2004 Audi C5 Avant. Tinted windows, debadged, drilled/slotted rotors, coilovers coming soon. Just added RS4 Reps. 18"x8", 225/45/r18 tires.

http://images.craigslist.org/00Y0Y_6Bs1Ip2PqlL_600x450.jpg

http://images.craigslist.org/00O0O_80zd8FodsUn_600x450.jpg

http://images.craigslist.org/00t0t_5DjLf7hMGlA_600x450.jpg

http://images.craigslist.org/00D0D_TO1RD87G7O_600x450.jpg

[v8a6]

So much WIN here! Awesome setups all around

[A6Avant]

^^^^^^ Agreed!

[glenda@fastcar]

What a great thread. I've just bought a 2003 A6 Avant 2.5TDi V6 Quattro and I'm looking at wheel options at the moment and brake set ups, so this thread is a great help.

Hoping to go for 19x10s all round.

[sp333dd3m0n]

18" tsw nuremburgrings.
20mm spacers all around
402'd roughly 20mm


http://img.tapatalk.com/d/13/08/06/8yze4a6y.jpg

Sent from my DROID RAZR HD using Tapatalk 4

This makes me want an allroad soooo bad.

[supra_speed]

19x10.5 et15
http://i175.photobucket.com/albums/w150/supra_speed619/s6stanced1.jpg (http://s175.photobucket.com/user/supra_speed619/media/s6stanced1.jpg.html)

[Nanozic]

19x10 et25 245/35-19 Nankang

https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/547743_429554400498178_75429288_n.jpg

https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/1235259_429553163831635_504287191_n.jpg

[chrisaudi4.2]

19x11 ET15 all around with 245/35/19http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013209.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013209.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013208.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013208.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013294.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013294.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013295.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013295.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013290.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013290.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/familyfun2013307.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/familyfun2013307.jpg.html)

[supra_speed]

that looks awesom3!!! I almost got ccw's like yours but weren't available at the time
Did you roll fenders?

[chrisaudi4.2]

that looks awesom3!!! I almost got ccw's like yours but weren't available at the time
Did you roll fenders?no. no fender roll and no rubbing at all,also this aren't ccw this are varrastoen wheels a ccw replica.

[Klimove]

In Russia you can not put the disks with larger, because they will square 5 km))) R15 - what you need!)))

[Devin]

Good god...... :drool:

[v8a6]

Enkei NT03+M
18x10.5 front and rear
et30
245/40/18
H&R coilovers
screw removed from top of front fender liner
previously had ground off the 'nub' on the inside of the front control arms
no rolling, and no rubbing detected (but I have only had them on for a day)

http://ep1.pinkbike.org/p4pb10193156/p4pb10193156.jpg
http://ep1.pinkbike.org/p4pb10193155/p4pb10193155.jpg
http://ep1.pinkbike.org/p4pb10190804/p4pb10190804.jpg

[Korben007]

Very nice! How much inner clearence do u have

[v8a6]

Very nice! How much inner clearence do u have

When I mounted the fronts, I reached my hand around to the inside of the rim close to the control arm. There is about 2 or 3mm, from what I could tell. Not much, but I havent detected any rubbing. I had previously grinded off the casting 'nub' near the top of the control arm. Not sure if that would have rubbed anything, or not. Also, if you have any play in your suspension, or if your alignment is slightly different than mine, then the clearance may vary.

10.5 et30 on an 18 inch wheel brings the wheel pretty close to a flush setup when dropped. This is a pic from yesterday, before I dropped the car another half inch (the more the drop, the more inward the top of the wheel will go)

http://ep1.pinkbike.org/p4pb10190795/p4pb10190795.jpg

Ill drop it a bit more still. So I expect it to be fully flush by the time I am done.

[Korben007]

Very helpful info thank you looks like a perfect fit for a wide body c5. Im going with the same width but +32 cause thats all they come in. So looks like ill be right up against the upright. How do you feel about that much stretch with a 245?

[v8a6]

Very helpful info thank you looks like a perfect fit for a wide body c5. Im going with the same width but +32 cause thats all they come in. So looks like ill be right up against the upright. How do you feel about that much stretch with a 245?

If it is an 40 series, it is no problem. Just make sure you find a good shop who knows what they are doing. 35 is probably a bit tougher. 30 series would be extreme, and probably dangerous at 245 on a 10.5.

The edge of the rim is VERY exposed. You will curb them.

I have a theory for stretched tires to look good... 1) has to be on a wheel with a lip (wheels with spokes to the edge dont look right with stretched tires) 2) you have to have the rims close to flush with the fender.. and 3) you have to go pretty low. If you get all that stuff bang on, then you dont really notice that the tires are stretched from most angles. Just my opinion, anyway.

[$teady$upreme]

this page is gold. Very sick rides.

Question, for the enkei nt03, wonder if they are 5x112 or redrilled?

[v8a6]

this page is gold. Very sick rides.

Question, for the enkei nt03, wonder if they are 5x112 or redrilled?

I am using wobble bolts since the wheels only come 5x114.3 in this size. You have to enlarge the holes to use wobbles, but the bolt pattern of the wheel remains 5x114.3.


A few pics of drilling out your wheels for wobble bolts (not for the faint of heart on new wheels, and proceed at your own risk!)

1. Soak down all the holes and the bits with LOTS of WD
http://ep1.pinkbike.org/p4pb10189695/p4pb10189695.jpg

2. Start with a 5/8th step bit. Make sure you dont go past the 5/8th, or youll make the hole too big
http://ep1.pinkbike.org/p4pb10189689/p4pb10189689.jpg
http://ep1.pinkbike.org/p4pb10189690/p4pb10189690.jpg
http://ep1.pinkbike.org/p4pb10189693/p4pb10189693.jpg

3. Continue with a 5/8th drill bit. Make sure the bit is approved for use in metal (i.e. dont use a masonary bit). DO NOT PUSH IT DOWN AT ALL !!! Or it will quickly seize up. Soak it all good with WD and almost just hold it so it floats in the hole.
http://ep1.pinkbike.org/p4pb10189688/p4pb10189688.jpg

4. All done ! Wash it up and mount.
http://ep1.pinkbike.org/p4pb10189691/p4pb10189691.jpg

[canadianA4B7]

On some metals cutting oil may be a better option. We use this stuff all the time at work, aluminum and copper steal aswell. And the thicker the material use the drill on slower setting. Just let it float with minimal pressure. Ull reduce heat when drilling which will reduce your holes from actually ovalling.

Love those wheels V8A6! They look nice! Would be nice setup on the ar i think!

[v8a6]

Good tip! I was looking all around for cutting oil, but obviously not in the right places. I finally settled on WD40, which was likely not ideal, but did the job.

[canadianA4B7]

Good tip! I was looking all around for cutting oil, but obviously not in the right places. I finally settled on WD40, which was likely not ideal, but did the job.


Ya it has lubricating to it but it is essentially a cleaner not a lube. The other alternative would have been a product called 10w-30 made by most lubricant companies!

[MurderedA6Avant]

Update:
STR 609 18x9.5, 245/35 front, 255/35 back, half inch spacer front, 1 inch spacer back.
http://i929.photobucket.com/albums/ad137/kievskiy/IMG_3566_zpsae185d63.jpg


Sick whip

[votblindub]

Lorinser RS 18" wheels with diamond face finish. Very conservatively set. I'd like mild spacers. I'm thinking 13-15mm or so and it's good.

http://i838.photobucket.com/albums/zz304/votblindub2/Audi%20Photos%20at%20high%20noon%20by%20CFD/4493901137_dc1b501ded_b.jpg
http://i838.photobucket.com/albums/zz304/votblindub2/Audi%20Photos%20at%20high%20noon%20by%20CFD/4493905435_b350348b30_b.jpg
http://i838.photobucket.com/albums/zz304/votblindub2/Audi%20Photos%20at%20high%20noon%20by%20CFD/4494538222_c14f4430cc_b.jpg
http://i838.photobucket.com/albums/zz304/votblindub2/Audi%20Photos%20at%20high%20noon%20by%20CFD/4495697337_7fe34e4010_b.jpg
http://i838.photobucket.com/albums/zz304/votblindub2/Audi%20Photos%20at%20high%20noon%20by%20CFD/4496337236_0e94a0bd0a_b.jpg

[khalimadeath]

Very clean i like it ^^

[desmo]

Very clean i like it ^^

^^ X2! ^^

[allroadinvail]

Summer mode 402 down 20mm rs4 reps 8x18 et 35 8mm/12mm spacers front/rear. Falken 612's
http://i879.photobucket.com/albums/ab351/xjinvail/4B58E43F-A05F-4D54-90B5-052B14473F44-595-000001115CDA74D1_zps7b65ea76.jpg (http://s879.photobucket.com/user/xjinvail/media/4B58E43F-A05F-4D54-90B5-052B14473F44-595-000001115CDA74D1_zps7b65ea76.jpg.html)
Winter mode still down 20 mm stock ar twins plastidipped same spacer set up. Dunlop wintersports
http://i879.photobucket.com/albums/ab351/xjinvail/1AFC5D6D-AD0C-4D4E-BA92-80AD37AC51D8-595-0000011168E7E9EF_zps1bb81645.jpg (http://s879.photobucket.com/user/xjinvail/media/1AFC5D6D-AD0C-4D4E-BA92-80AD37AC51D8-595-0000011168E7E9EF_zps1bb81645.jpg.html)

[all_kobiwon]

http://i1179.photobucket.com/albums/x397/taigamal/AudiWset-up_zpsf31fe910.jpg

[edhure]

Hi Y" All..
This is my C5
Running in old school Mandrus Emil
Front 18x8.5 et32 with a 215/35/18
Rear are 18x9.5 et35 with a 225/35/18.*

http://i116.photobucket.com/albums/o35/edhure23/20131212_172545_Hagrid_Bronze.jpg (http://s116.photobucket.com/user/edhure23/media/20131212_172545_Hagrid_Bronze.jpg.html)

http://i116.photobucket.com/albums/o35/edhure23/20131212_172523_Opposite.jpg (http://s116.photobucket.com/user/edhure23/media/20131212_172523_Opposite.jpg.html)

http://i116.photobucket.com/albums/o35/edhure23/20131212_172406-1.jpg (http://s116.photobucket.com/user/edhure23/media/20131212_172406-1.jpg.html)

http://i116.photobucket.com/albums/o35/edhure23/20131212_172446_Hagrid_Light.jpg (http://s116.photobucket.com/user/edhure23/media/20131212_172446_Hagrid_Light.jpg.html)

[domin8 S8]

Dear Frank
Was looking for some advice on wheel fitment:
l have been looking into a set of Miro 111's at 19x 8.5 in front and 19x 9.5 in the rear with a tire size of 245/35 in front and 275/35 in the rear.
Any advice on spacing or fender modifications would be appreciated the tires are BF Goodrich KDW2's if that helps.
I want to try to get them as flush with the fenders as possible.
As per these photos here:
http://www.2040cars.com/Audi/A6/2000...s6-kit-284800/
Special thanks to chrisaudi4.2 for the photo reference

Couple of differences to NOTE:
the wheels are et 32 in front (again 8.5 in) and et 40 in the rear (again 9.5 in)
ET is different because the the bolt pattern is 5x112
Chris' final ET in front is 17 and the rear is 15
Not sure of rear final ET because my tire is 275 in the rear...
...I guess I kinda answered my own question there with the step s to fitment as per test fitting and mock-ups when it comes to wheels...

Anyhow please chime in any and all advice is greatly appreciated
Also does anyone have experience or input on 275 tires in the rear of 4.2 sedans
Thanks and Happy Holidays to all

Regards John

[domin8 S8]

this page is gold. Very sick rides.

Question, for the enkei nt03, wonder if they are 5x112 or redrilled?

An alternative to drilling would be purchasing a set of ADAPTEC adapters and/or spacers for your application high quality stuff, affordable too.
Will send them my Mandrus Millennium 17x8 wheels which are my current setup....for a refurbish on the lip and repaint. Will consider selling them once the set of Miro 111's arrive. Been wanting to change the stock wheel size from 17 to 18x8 anyways. Alzor fan blades...winter setup if it snows.
Miro 111 19 staggered summer setup.
Check them out.http://www.motorsport-tech.com

[Audiudo]

Hi Y" All..
This is my C5
Running in old school Mandrus Emil
Front 18x8.5 et32 with a 215/35/18
Rear are 18x9.5 et35 with a 225/35/18.*


http://i116.photobucket.com/albums/o35/edhure23/20131212_172446_Hagrid_Light.jpg (http://s116.photobucket.com/user/edhure23/media/20131212_172446_Hagrid_Light.jpg.html)

Looks good. I would do at least 225/35 in the front too, to fill up the wheel wells better. or even 235/40 all around.

[ENDEE666]

l have been looking into a set of Miro 111's at 19x 8.5 in front and 19x 9.5 in the rear with a tire size of 245/35 in front and 275/35 in the rear.
Any advice on spacing or fender modifications would be appreciated the tires are BF Goodrich KDW2's if that helps.
I want to try to get them as flush with the fenders as possible.
As per these photos here:
http://www.2040cars.com/Audi/A6/2000...s6-kit-284800/
Special thanks to chrisaudi4.2 for the photo reference

Couple of differences to NOTE:
the wheels are et 32 in front (again 8.5 in) and et 40 in the rear (again 9.5 in)
ET is different because the the bolt pattern is 5x112
Chris' final ET in front is 17 and the rear is 15
Not sure of rear final ET because my tire is 275 in the rear...
...I guess I kinda answered my own question there with the step s to fitment as per test fitting and mock-ups when it comes to wheels...

Anyhow please chime in any and all advice is greatly appreciated
Also does anyone have experience or input on 275 tires in the rear of 4.2 sedans
Thanks and Happy Holidays to all

Regards John

A few things -
1- Do not run 245/35 front & 275/35 rear. It will mess with Quattro from such a substantial diameter difference.
2- That very car you referenced is in this thread, as well as others, so you can see what he runs since that is exactly what you want.

[ENDEE666]

Dear Frank
Was looking for some advice on wheel fitment:
l have been looking into a set of Miro 111's at 19x 8.5 in front and 19x 9.5 in the rear with a tire size of 245/35 in front and 275/35 in the rear.
Any advice on spacing or fender modifications would be appreciated the tires are BF Goodrich KDW2's if that helps.
I want to try to get them as flush with the fenders as possible.
As per these photos here:
http://www.2040cars.com/Audi/A6/2000...s6-kit-284800/
Special thanks to chrisaudi4.2 for the photo reference

Couple of differences to NOTE:
the wheels are et 32 in front (again 8.5 in) and et 40 in the rear (again 9.5 in)
ET is different because the the bolt pattern is 5x112
Chris' final ET in front is 17 and the rear is 15
Not sure of rear final ET because my tire is 275 in the rear...
...I guess I kinda answered my own question there with the step s to fitment as per test fitting and mock-ups when it comes to wheels...

Anyhow please chime in any and all advice is greatly appreciated
Also does anyone have experience or input on 275 tires in the rear of 4.2 sedans
Thanks and Happy Holidays to all

Regards John

The very car you want to replicate is on page 8 of this very thread...

http://www.audizine.com/forum/showthread.php/458792-Post-your-wheel-tire-setup-with-pictures-and-information?p=8762786&viewfull=1#post8762786

[domin8 S8]

The very car you want to replicate is on page 8 of this very thread...

http://www.audizine.com/forum/showthread.php/458792-Post-your-wheel-tire-setup-with-pictures-and-information?p=8762786&viewfull=1#post8762786

Thanks very much

[kneel]

Need to see more AR with wheels, as hopefully I plan to get one in coming weeks to months. Gotta sell my #BTA4Avant first

[edhure]

Looks good. I would do at least 225/35 in the front too, to fill up the wheel wells better. or even 235/40 all around.

Thanks for the advice, I may try 225/35 in the front to see how it looks. But I can't go higher because I am planning to go with Bagyard AirRide, and I love how stretch tires looks
On Baggit when it drops.

[A4edwin]

To much talk. Post pics

[canadianA4B7]

Dear Frank
Was looking for some advice on wheel fitment:
l have been looking into a set of Miro 111's at 19x 8.5 in front and 19x 9.5 in the rear with a tire size of 245/35 in front and 275/35 in the rear.
Any advice on spacing or fender modifications would be appreciated the tires are BF Goodrich KDW2's if that helps.
I want to try to get them as flush with the fenders as possible.
As per these photos here:
http://www.2040cars.com/Audi/A6/2000...s6-kit-284800/
Special thanks to chrisaudi4.2 for the photo reference

Couple of differences to NOTE:
the wheels are et 32 in front (again 8.5 in) and et 40 in the rear (again 9.5 in)
ET is different because the the bolt pattern is 5x112
Chris' final ET in front is 17 and the rear is 15
Not sure of rear final ET because my tire is 275 in the rear...
...I guess I kinda answered my own question there with the step s to fitment as per test fitting and mock-ups when it comes to wheels...

Anyhow please chime in any and all advice is greatly appreciated
Also does anyone have experience or input on 275 tires in the rear of 4.2 sedans
Thanks and Happy Holidays to all

Regards John

my experience with the 275 rears on my allroad was good. lots of clearance on the ar. for 3 tire widths or more you have to adjust the height by 5 lower. so for a 245/35/19 front you must go with a 275/30/19 rear. on my car I went with 245/40/19 front and 275/35/19rears. they look awesome from the ass of the car and were very usefull for trying to pack down some gravel in the driveway. just be aware that with wider tires the height ratio will change. willtheyfit.com or a few other tire size calculators will help you to see exactly what size tires will match for your application.

[geeky]

Got some new spacers for the allroad today. Should be here in about a week. Time to dial in the suspension again. But final offset will be et-8 in the rear and et-3 in the front [evilsmile][evilsmile][evilsmile]

[jstarr427]

Hey guys, I recently bought a 99 2.8L A6, coming from a Mitsubishi (not that it matters) I picked up some '06 A6 18x8.5 ET45 wheels, test fitted them on the car, and they clear the upright on the car by less than the width of my finger, yet look like they're dead flush with the fender. So I've got a few questions
1. Is there a difference in uprights or where the wheel hub is placed relative to the body of the car in a pre-facelift 2.8 A6 vs a facelift 2.7t? I'm looking at all your nice cars running 18x8.5 ET35/45 and havent seen any info on tire clearance. I'm guessing that with a 235/40/18 the tire will rub on my car
2. Given that info, would everyone suggest a 10mm spacer? 5mm? I'm sitting at stock ride height for now, and would prefer to not have to do any fender work if I lower it in the future. Thanks for the help!

[$teady$upreme]

Can you take a pic of your "dead flush" with the fender setup?

Cause x8.5 et45 seems like a very conservative setup. And mind you that, once you are lowered with the exact same setup, it wont' be dead flush anymore and rather sunking in. (depends on how much lower)

[jstarr427]

The 'dead flush' comment was more based on what I observed test fitting the wheel on the car with the driver's front corner jacked up. I just picked these wheels up yesterday and don't have tires as of yet. My main concern is having a 234/40/18 rub on the upright, which based on how close the wheel is, I'm betting it will (without a spacer). I will probably need a 7-10 MM spacer to get an ET closer to 35/38. I guess I assumed that when the suspension is compressed the whole assembly will move out, not in, which is why I also asked if the 2.7t uprights are different than the 2.8's. I guess I'll have to wait and see what'll happen when I choose a tire to go with.

[samaj]

Wheels ABT SP01 (Made by BBS)
19x8.5" ET 32. Front 225-35-19 & rears 235-35-19 Nitto NT555
Front 25 mm & rear 30 mm H&R spacers.
Effective ET front +7 & rear +2
Lowered on H&R coilovers.
Front inner fender screw removed. Rear rubs slightly on hard corning. Might get it raised 5 mm.

http://i255.photobucket.com/albums/hh134/samaj69/IMG_5360_zps474e1cdb.jpg (http://s255.photobucket.com/user/samaj69/media/IMG_5360_zps474e1cdb.jpg.html)

http://i255.photobucket.com/albums/hh134/samaj69/IMG_5340_zpsdd3f20f2.jpg (http://s255.photobucket.com/user/samaj69/media/IMG_5340_zpsdd3f20f2.jpg.html)

http://i255.photobucket.com/albums/hh134/samaj69/IMG_5339_zpsbb1787d4.jpg (http://s255.photobucket.com/user/samaj69/media/IMG_5339_zpsbb1787d4.jpg.html)

http://i255.photobucket.com/albums/hh134/samaj69/IMG_5336_zps3920b419.jpg (http://s255.photobucket.com/user/samaj69/media/IMG_5336_zps3920b419.jpg.html)

http://i255.photobucket.com/albums/hh134/samaj69/IMG_5328_zpsbbab1d8d.jpg (http://s255.photobucket.com/user/samaj69/media/IMG_5328_zpsbbab1d8d.jpg.html)

[$teady$upreme]

^^^very nice.

[ceeeheee]

Hey everyone, looking for some advice!!

Just picked up a set of vmr 710 18x9.5 et 45 for a price I couldn't refuse.. However these wheels need rubber... I have an 03 c5 a6 2.7 w/ koni fsd shocks/eibach springs. With the wheel set came 12mm spacers(if they dont work I'll get new ones). What tire should I run 225 or 235? I notice quite a few of you guys are stretching the 225 on the 9.5 wheel? Curious to see everyones opinion based on experience with these 18x9.5

Any input is greatly appreciated!
Craig

[ENDEE666]

Hey everyone, looking for some advice!!

Just picked up a set of vmr 710 18x9.5 et 45 for a price I couldn't refuse.. However these wheels need rubber... I have an 03 c5 a6 2.7 w/ koni fsd shocks/eibach springs. With the wheel set came 12mm spacers(if they dont work I'll get new ones). What tire should I run 225 or 235? I notice quite a few of you guys are stretching the 225 on the 9.5 wheel? Curious to see everyones opinion based on experience with these 18x9.5

Any input is greatly appreciated!
Craig

Your answer is in this very thread. Some like stretch and they do 225 on 9.5. Personally I run 255 on my 9.5. All depends what you want. Plenty od posts about 9.5 width on here. See what you like.

[mic_detonator]

So i have a tire size question, will 205/40/17 fit my stock 17's? Seems a tad small to me.

[ENDEE666]

So i have a tire size question, will 205/40/17 fit my stock 17's? Seems a tad small to me.

Way too small. Stock 17" size is 235/45/17. Which is 30mm wider and 23.75mm shorter per sidewal. Which means total diameter is almost 2" too small.

[mic_detonator]

Thats what i thought, i have a 235 on there and got a nice flat today. So time for a new tire i think.

[Brooklyn67]

For a 2002 S6: Will an 18"x8" wheel with 245/45 tires fit under the front/rear fenders without rubbing? I know that the stock size is 255/40 R17 and the diameter is 25.03". The diameter of the 18" wheel with the 245/45s is 26.68". The offset on the wheels is 45mm.

Besides speedometer error and additional ride height, will this tire/wheel combo fit without rubbing the inner fender liners?

[Korben007]

^Might want some spaces. Gonna be quite a sunken setup

[stef2.7t]

Would 20x10, et29 run into any problems on a c5 S6.

[Racin2redline]

http://img.tapatalk.com/d/14/02/06/ume4y6yg.jpg
http://img.tapatalk.com/d/14/02/09/yjytemam.jpg


Stock wheels no spacers will be adding 15mm soon. Yokohama Geolander ATS 225/60/17 (27.6in tall) max is probably 28in

FYI this is about the biggest you can fit without rubbing lock to lock I also took Into account airing down for beach use.. So even if a bigger tire was possible it would probably rub the upright.

Also there is slim choices for an allterrain tire close to stock sizes. Fortunately the Geolander is an amazing tire!

A 16in rim with the right lower offset (ET32 or lower) would yield better tire results like a 215/65/17 general grabber AT2 and Bridgestone revos ect.

[n01]

http://i1287.photobucket.com/albums/a636/n01n01/IMG-20130811-00132_zps90c19eaa.jpg
19" tn4.

[n01]

http://i1287.photobucket.com/albums/a636/n01n01/IMG-20130811-00132_zps90c19eaa.jpg

http://i1287.photobucket.com/albums/a636/n01n01/IMG-20130811-00130_zps52354d94.jpg

19" Tomason TN4 with 255/35/19

[SteelyS6]

^ Looks good ^

[eagledubg]

supra what kind of wheels are these??



19x10.5 et15
http://i175.photobucket.com/albums/w150/supra_speed619/s6stanced1.jpg (http://s175.photobucket.com/user/supra_speed619/media/s6stanced1.jpg.html)

[280zforce]

I'm showing off my current wheels and also selling them... going down to 18s.

FOR SALE: Forgestar CF5 - Deep Concave Wheels (rotary-forged)

FRONT:
19x9.5 ET +20 with 265/35 Continental Extreme Contact DW

REAR:
19x10 ET +20 with 275/35 Continental Extreme Contact DW

COLOR:
powder coated Anthracite Metallic Texture.
***10mm spacers included for Front wheels

PRICE:
-$1,750 with tires (value of ~$3,650 new)
-$1,500 without tires (value of ~$2,550 new)

CLICK HERE TO SEE MY AUDIZINE FOR SALE AD FOR THESE WHEELS (http://www.audizine.com/classifieds/showproduct.php?product=105334&title=for-sale-3a-19-26quot-3b-forgestar-cf5deep-concave-rotary-forged-wheels&cat=48)

http://i26.photobucket.com/albums/c105/280zforce/2004%20Audi%20AR/securedownload-2.jpeg~original (http://s26.photobucket.com/user/280zforce/media/2004%20Audi%20AR/securedownload-2.jpeg.html)
http://i26.photobucket.com/albums/c105/280zforce/2004%20Audi%20AR/IMG_3122.jpg~original (http://s26.photobucket.com/user/280zforce/media/2004%20Audi%20AR/IMG_3122.jpg.html)
http://i26.photobucket.com/albums/c105/280zforce/2004%20Audi%20AR/IMG_8288.jpg~original (http://s26.photobucket.com/user/280zforce/media/2004%20Audi%20AR/IMG_8288.jpg.html)
http://i26.photobucket.com/albums/c105/280zforce/2004%20Audi%20AR/image13.jpeg~original (http://s26.photobucket.com/user/280zforce/media/2004%20Audi%20AR/image13.jpeg.html)

[jefftheagent]

Quick Question, Is anyone running 19x9.5 all around? I have a 05 S4, looking to do it all around, they have et40...need recommendations on tire sizes and spacers if needed...looking to get that little strech and flush look....thanks![cool]

[pearlescent]

http://img.tapatalk.com/d/14/02/06/ume4y6yg.jpg
http://img.tapatalk.com/d/14/02/09/yjytemam.jpg


Stock wheels no spacers will be adding 15mm soon. Yokohama Geolander ATS 225/60/17 (27.6in tall) max is probably 28in

FYI this is about the biggest you can fit without rubbing lock to lock I also took Into account airing down for beach use.. So even if a bigger tire was possible it would probably rub the upright.

Also there is slim choices for an allterrain tire close to stock sizes. Fortunately the Geolander is an amazing tire!

A 16in rim with the right lower offset (ET32 or lower) would yield better tire results like a 215/65/17 general grabber AT2 and Bridgestone revos ect.

Hey! Consider 20mm spacers on the twin spoke wheels, rather than 15mm. I found that 20mm gets the wheel arches nearly perfectly flush with the face of the wheel, but keeping all tire tread inside the wheel well.

LOVE the meaty tires btw!

[Joelgrin]

http://i346.photobucket.com/albums/p434/joelgrin/2013-05-29_10-50-59_HDR_zpsk99sj1ar.jpg (http://s346.photobucket.com/user/joelgrin/media/2013-05-29_10-50-59_HDR_zpsk99sj1ar.jpg.html)

This is the initial setup with H&R Race springs and Continental 235/40/18s

The wheels are VOXX MB5 Mercedes replica wheels 18x9.5 with an offset of 30

Only had to slightly roll the front fender lining and remove one of the upper screws for the inner front fender

Then I Plastidipped the wheels black

http://i346.photobucket.com/albums/p434/joelgrin/20131102_145748_zpsxtc7ztza.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_145748_zpsxtc7ztza.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/20131102_180725_zpss1sa8nbq.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_180725_zpss1sa8nbq.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/20131102_180748_zps91geimy8.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_180748_zps91geimy8.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/babd229a-4e5b-4f5c-899b-9cf13fa5121f_zpsdd5757ff.jpg (http://s346.photobucket.com/user/joelgrin/media/babd229a-4e5b-4f5c-899b-9cf13fa5121f_zpsdd5757ff.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/IMG_20131102_224849_zps8wwvepja.jpg (http://s346.photobucket.com/user/joelgrin/media/IMG_20131102_224849_zps8wwvepja.jpg.html)

And then I decided to Plastidip the roof

http://i346.photobucket.com/albums/p434/joelgrin/20131218_103940_zpszropojio.jpg (http://s346.photobucket.com/user/joelgrin/media/20131218_103940_zpszropojio.jpg.html)

[Audiudo]

^You have a side profile pic?

[geeky]

Teaser.
19x10 et-3 in the rear.


http://farm4.staticflickr.com/3768/12702712733_1091ae6d06_z.jpg (http://www.flickr.com/photos/jinsanlee/12702712733/)
Geeky - Allroad; Test Fit (http://www.flickr.com/photos/jinsanlee/12702712733/) by Jinsan John Lee (http://www.flickr.com/people/jinsanlee/), on Flickr

[blkrhyno]

I scored a set of A8 w12 wheels 20x9 putting them on my allroad, I'm thinking of using 255/35/20 tires, what do you guys think ?

Sent from my LG-LS980 using Tapatalk

[ENDEE666]

I scored a set of A8 w12 wheels 20x9 putting them on my allroad, I'm thinking of using 255/35/20 tires, what do you guys think ?

Sent from my LG-LS980 using Tapatalk

Gonna need really big spacers, but should look good. I have 255/40/19 on mine. My net et is 16. I could probably still push them out further, another 5mm or so, maybe more. Any less and the large "curb protector" bead on my tires hit the rear bag. Tire was fine, but these Continentals have huge lips where the wheel sits..

I think most A8 offsets are in the 40's. Like 43-45..

[powliuz]

3sdm 0.05 Et22 8.5J 18"
http://i.imgur.com/SHUzxNG.jpg

[blkrhyno]

Gonna need really big spacers, but should look good. I have 255/40/19 on mine. My net et is 16. I could probably still push them out further, another 5mm or so, maybe more. Any less and the large "curb protector" bead on my tires hit the rear bag. Tire was fine, but these Continentals have huge lips where the wheel sits..

I think most A8 offsets are in the 40's. Like 43-45..

They are ET 46 so I was thinking of either a set of 25mm or 30mm spacers, the 30mm spacers would bring me to ET 16 like you. Here are the wheels in question.
http://i305.photobucket.com/albums/nn209/blkrhino73/Audi/CAM00079.jpg (http://s305.photobucket.com/user/blkrhino73/media/Audi/CAM00079.jpg.html)http://i305.photobucket.com/albums/nn209/blkrhino73/Audi/CAM00081.jpg (http://s305.photobucket.com/user/blkrhino73/media/Audi/CAM00081.jpg.html)
So my car will look like this soonhttp://i305.photobucket.com/albums/nn209/blkrhino73/021-2.jpg (http://s305.photobucket.com/user/blkrhino73/media/021-2.jpg.html)

[milkycereal]

tire size?? looks perfect!


18" tsw nuremburgrings.
20mm spacers all around
402'd roughly 20mm


http://img.tapatalk.com/d/13/08/06/8yze4a6y.jpg

Sent from my DROID RAZR HD using Tapatalk 4

[milkycereal]

just a quick question for the masters on here. I've gotten everything figured out on my b6 s4, but this allroad is an entirely different beast. got a free set of 18x7.5 wheels from my buddy to use on my 2001 allroad. what size tire should i be looking at? they have 225/40's on them now, at only 7.5 wide, i don't want to get too wide of a tire and have that balloon look. will the 225/40's be ok (strictly summer setup) or should i be looking for a different size? any and all opinions would be greatly appreciated. pics will be coming soon. THANX FELLAS!

[$teady$upreme]

x7.5, size 225 is the perfect set up. 235 will be too wide and ballon already.

[milkycereal]

Thank you so much!! Thats what i was figuring, but i thought id ask those that may have more experiance with this platform. THANX!!

[LowA4]

VMR VB3 19x10 et38. 23mm spacer front and 25mm in rear. 255/35 Dunlop sport maxx gt tires.http://img.tapatalk.com/d/14/03/08/zu6ydehy.jpghttp://img.tapatalk.com/d/14/03/08/vuneha4y.jpg


Sent from my iPhone using Tapatalk

[Garpemo]

Do you guys think that 8Jx19 ET35 255/35/19 will fit on my A6 3.0q S-line stock suspension and without any fixing the fenders?


Skickas från min iPhone via Tapatalk

[Garpemo]

http://img19.imageshack.us/img19/8945/v4kn.jpg

A6 C5 + AMG wheels 18" 225-35 8.5" front and 255-40 back 8.5"

Low = photoshop LOL

What ET do you have? And does it scratch?


Skickas från min iPhone via Tapatalk

[allroad'n]

tire size?? looks perfect!

18 x 8.5

245/14/18

its the exact same dimension as stock i think.. maybe an inch wider. i wish the pic was bigger .

[VMRWheels]

VMR VB3 19x10 et38. 23mm spacer front and 25mm in rear. 255/35 Dunlop sport maxx gt tires.http://img.tapatalk.com/d/14/03/08/zu6ydehy.jpghttp://img.tapatalk.com/d/14/03/08/vuneha4y.jpg


Sent from my iPhone using Tapatalk
That looks great!

[A6Rick]

http://i346.photobucket.com/albums/p434/joelgrin/2013-05-29_10-50-59_HDR_zpsk99sj1ar.jpg (http://s346.photobucket.com/user/joelgrin/media/2013-05-29_10-50-59_HDR_zpsk99sj1ar.jpg.html)

This is the initial setup with H&R Race springs and Continental 235/40/18s

The wheels are VOXX MB5 Mercedes replica wheels 18x9.5 with an offset of 30

Only had to slightly roll the front fender lining and remove one of the upper screws for the inner front fender

Then I Plastidipped the wheels black

http://i346.photobucket.com/albums/p434/joelgrin/20131102_145748_zpsxtc7ztza.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_145748_zpsxtc7ztza.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/20131102_180725_zpss1sa8nbq.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_180725_zpss1sa8nbq.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/20131102_180748_zps91geimy8.jpg (http://s346.photobucket.com/user/joelgrin/media/20131102_180748_zps91geimy8.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/babd229a-4e5b-4f5c-899b-9cf13fa5121f_zpsdd5757ff.jpg (http://s346.photobucket.com/user/joelgrin/media/babd229a-4e5b-4f5c-899b-9cf13fa5121f_zpsdd5757ff.jpg.html)

http://i346.photobucket.com/albums/p434/joelgrin/IMG_20131102_224849_zps8wwvepja.jpg (http://s346.photobucket.com/user/joelgrin/media/IMG_20131102_224849_zps8wwvepja.jpg.html)

And then I decided to Plastidip the roof

http://i346.photobucket.com/albums/p434/joelgrin/20131218_103940_zpszropojio.jpg (http://s346.photobucket.com/user/joelgrin/media/20131218_103940_zpszropojio.jpg.html)

Hey are you using spacers? If so how much mm'5? Nice poke

Sent from my HTCONE using Tapatalk

[Joelgrin]

A6 rick. Thanks!

No spacers on those voxx wheels. I was going to space the back 5mm. Never did. I just got new mercedes wheels though! I'll post specs later but here is some pics.

http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/IMG_321460224072_zpsgd149zwi.jpeg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/IMG_321460224072_zpsgd149zwi.jpeg.html)


http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/Joel%202%20of%201_zps3kruskhh.jpg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/Joel%202%20of%201_zps3kruskhh.jpg.html)


http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/Joel%203%20of%201_zpsfjkw9bts.jpg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/Joel%203%20of%201_zpsfjkw9bts.jpg.html)

[A6Rick]

A6 rick. Thanks!

No spacers on those voxx wheels. I was going to space the back 5mm. Never did. I just got new mercedes wheels though! I'll post specs later but here is some pics.

http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/IMG_321460224072_zpsgd149zwi.jpeg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/IMG_321460224072_zpsgd149zwi.jpeg.html)


http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/Joel%202%20of%201_zps3kruskhh.jpg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/Joel%202%20of%201_zps3kruskhh.jpg.html)


http://i346.photobucket.com/albums/p434/joelgrin/Mobile%20Uploads/Joel%203%20of%201_zpsfjkw9bts.jpg (http://s346.photobucket.com/user/joelgrin/media/Mobile%20Uploads/Joel%203%20of%201_zpsfjkw9bts.jpg.html)

Nice. You lowered it though right? Coilovers or springs?

Sent from my HTCONE using Tapatalk

[A6Rick]

Simple setup, but more mods to come.

18" RS4's 225-40 18.
Stock height but soon change!

http://img.tapatalk.com/d/14/03/20/bugu5y6y.jpg
http://img.tapatalk.com/d/14/03/20/nagugydy.jpg

Sent from my HTCONE using Tapatalk

[Joelgrin]

A6 Rick.
H&R Race springs. I can't believe how little body roll it has for being a big car. really tight.
and with the right wheels and offset. it sits soooo pretty.

I love seeing everyones setups by the way. being new to audizine I can't wait to see it all.

[A6Rick]

A6 Rick.
H&R Race springs. I can't believe how little body roll it has for being a big car. really tight.
and with the right wheels and offset. it sits soooo pretty.

I love seeing everyones setups by the way. being new to audizine I can't wait to see it all.

Nice. How's the ride in comparison to stock height? I sometimes hear it's a bit hard. Also im thinking about doing a 1.5" drop. Nothing too crazy as I live in pothole infested NYC.

Sent from my HTCONE using Tapatalk

[dubbed_up_daz]

AH Flachwerk modified H+R Race coilovers,9x20 Bentley Mulliners,245/30x20 michelin pilot supersports,10mm spacers all round for now
http://i4.photobucket.com/albums/y120/dazdub/Helga/helga026_zpsb9cf0dcf.jpg (http://s4.photobucket.com/user/dazdub/media/Helga/helga026_zpsb9cf0dcf.jpg.html)

[Santana1094]

2002 A6 4.2

Full polish Schmidt TH-line
18x10.5 /// ET1 /// 235/40/18
18x12 /// ET8 /// 265/35/18

ST Coilovers

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/320311_3784235600217_1109269057_n.jpg

Do you think 20x10.5 et20R et15F is to aggressive ? On a 2004 Audi Allroad 2.7t

[Santana1094]

Do you think 20x10.5 et20R et15F is to aggressive ? On a 2004 Audi Allroad 2.7t

[klev]

Do you think 20x10.5 et20R et15F is to aggressive ? On a 2004 Audi Allroad 2.7t
I have 10.5 x 20" on my 2001 Allroad. I dont remember the offset on the wheels right now, but I am gonna check it later.
I have 30mm spacer in front, and 20mm rear.
245/35-20 tires

Pictures is coming



*Edit*
I will have 30mm spacer rear too
Front:
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095357.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095357.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095354.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095354.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095344.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095344.jpg.html)

Rear:
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095315.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095315.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095322.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095322.jpg.html)





*Edit 2*

http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130144.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130144.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130223.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130223.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130230.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130230.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130245.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130245.jpg.html)

Some from last year:
http://i5.photobucket.com/albums/y191/kleiven/20130913_222140_LLS.jpg (http://s5.photobucket.com/user/kleiven/media/20130913_222140_LLS.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/20130913_222046_RichtoneHDR.jpg (http://s5.photobucket.com/user/kleiven/media/20130913_222046_RichtoneHDR.jpg.html)

[CHRISTOPHÉ]

^^^ oh mama!! That is absolutely stanced to perfection! Any pictures from the side. I wish I had kept my old 20x10" 797's from my A8 but I had nowhere to store them.
Well done I'm in love!

[klev]

^^^ oh mama!! That is absolutely stanced to perfection! Any pictures from the side. I wish I had kept my old 20x10" 797's from my A8 but I had nowhere to store them.
Well done I'm in love!

Thanks mate [up] :)

[blkrhyno]

Very nice, a little too much stretch for me but well executed. I would love to see a shot of the rear.

[Santana1094]

I have 10.5 x 20" on my 2001 Allroad. I dont remember the offset on the wheels right now, but I am gonna check it later.
I have 30mm spacer in front, and 20mm rear.
245/35-20 tires

Pictures is coming



*Edit*
I will have 30mm spacer rear too
Front:
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095357.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095357.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095354.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095354.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095344.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095344.jpg.html)

Rear:
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095315.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095315.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_095322.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_095322.jpg.html)





*Edit 2*

http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130144.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130144.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130223.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130223.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130230.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130230.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/Mobile%20Uploads/20140410_130245.jpg (http://s5.photobucket.com/user/kleiven/media/Mobile%20Uploads/20140410_130245.jpg.html)

Some from last year:
http://i5.photobucket.com/albums/y191/kleiven/20130913_222140_LLS.jpg (http://s5.photobucket.com/user/kleiven/media/20130913_222140_LLS.jpg.html)
http://i5.photobucket.com/albums/y191/kleiven/20130913_222046_RichtoneHDR.jpg (http://s5.photobucket.com/user/kleiven/media/20130913_222046_RichtoneHDR.jpg.html)


Thanks for the help and it looks awesome bro I'm going to put pictures up soon just waiting on the rims

[HandyManny]

19x8.5 +15F
19x10.5 +25R

http://i193.photobucket.com/albums/z127/skeeter_101/71F129EC-94A8-45EF-ACE7-F74D7C73734C_zpswbf2poni.jpg (http://s193.photobucket.com/user/skeeter_101/media/71F129EC-94A8-45EF-ACE7-F74D7C73734C_zpswbf2poni.jpg.html)

[AaronNY]

Anyone have info on what size spacers would be good for a 4.2 a6 with 17x7.5 OEM s-line bbs wheels with 235/50/17 tires? Ive searched this thread and google and audizine and can only find narrowbody cars with them.

[JeeGaa]

20" x 9.5J BSA Motorsport rims ET 45
stretched 245/35/20 Sumitomo HTRZ2 tires
ABT lowered springs, front aftermarket schocks, rear original set (approx 40-50mm lower)
3mm spacers in front, as 2.7T has large brake supports in front, no spacers in rear needed.

p.s. sold those rims as had problem with front.. dont recomend to do this :D now bought set of 18" BBS RS2 (710) :)

http://s27.postimg.org/57a7c4z9v/rain.jpg

http://s7.postimg.org/qe3j2yu2z/IMG_8557.jpg


http://s8.postimg.org/ctag9ipp1/rain2.jpg


http://s23.postimg.org/kkuzbeiij/IMG_8559.jpg

http://s30.postimg.org/jy7bmqv8h/MG_3582.jpg

[ENDEE666]

http://s8.postimg.org/ctag9ipp1/rain2.jpg



^Something is wrong with your badge on the left.

[8520]

^Something is wrong with your badge on the left.

Looks like it says ASS?

[ChicagosPhantom]

Srry man,but those are one ugly MF ghetto style rims....at least they're not chrome....bling,bling!

Sent from my HTC6525LVW using Tapatalk

[ChicagosPhantom]

Thank god you got rid of them...now BBS whole different story....

Sent from my HTC6525LVW using Tapatalk

[OGBULLYLOCDAWG]

I hope a bird shits on the next person that says "bling bling".

[A6Rick]

20" x 9.5J BSA Motorsport rims ET 45
stretched 245/35/20 Sumitomo HTRZ2 tires
ABT lowered springs, front aftermarket schocks, rear original set (approx 40-50mm lower)
3mm spacers in front, as 2.7T has large brake supports in front, no spacers in rear needed.

p.s. sold those rims as had problem with front.. dont recomend to do this :D now bought set of 18" BBS RS2 (710) :)

http://s27.postimg.org/57a7c4z9v/rain.jpg

http://s7.postimg.org/qe3j2yu2z/IMG_8557.jpg


http://s8.postimg.org/ctag9ipp1/rain2.jpg


http://s23.postimg.org/kkuzbeiij/IMG_8559.jpg

http://s30.postimg.org/jy7bmqv8h/MG_3582.jpg

Almost threw up. Worse choose of rims bruh.


Looks like it says ASS?

Lol or AS6... Someone's trying to hard to be an imposter


I hope a bird shits on the next person that says "bling bling".

... Then get shot lol


Sent from my HTCONE using Tapatalk

[VJ's A6]

Just pick these up.. TT Trubine 18x9 ET52. I will be running 20mm spacers all around with 245/40/ tires for now.

http://i5.photobucket.com/albums/y167/Mr_Rally/Audi%20Parts%20FS/wheel4sm.jpg

[Grueni2507]

A6 Allroad lowered
8,5jx19 ET 25 Oxigin with Vredestein Ultrac Sessanta 245/35 ZR 19

http://i1008.photobucket.com/albums/af206/grueni2507/IMG_6953_zps7639aee0.jpg

[Rapytlarz]

What color are those rims. Have the same car and yours has the look. It's bad . That's the look I'm going for. How much did you lower it.

[Grueni2507]

What color are those rims. Have the same car and yours has the look. It's bad . That's the look I'm going for. How much did you lower it.

The rims are glossy black, the metal part in the front is brushed and clear coated, we did it low about 50 mm in the front and 35-40 in the back. then i plasti dipped the front chrome parts with matte black with glossy finish (under headlights) and gun metal grey for the grille.

looks nice

[4rings2turbos]

we did it low about 50 mm in the front and 35-40 in the back.

[o_o]

Do you drive it in level one? That sounds aggressive for 402. Or maybe you're on coils?

[ENDEE666]

His tires are also approx 1" smaller overall diameter than standard Allroad tires. I lowered mine about 30-35mm and my tires are 255/40/19, which has 12mm more radius than his 255/35 and I don't rub. 19x10 et16.