siryova
11-12-2011, 09:24 AM
I coding with VAG-COM the computer to shown information in cluster but nothing is show.
1. Select address 17 - instruments.
2. Select adaptation - 10
3. Select channel 62 and read it.
4. Add 4 to the value read and test it. (my old value was 17, plus 4 update to 21)
5. Save it.
1. Select address 17 - instruments.
2. Select adaptation - 10
3. Select channel 62 and read it.
4. Add 4 to the value read and test it. (my old value was 17, plus 4 update to 21)
5. Save it.