PDA

View Full Version : Lemmiwinks and avant questions..



spinall4
10-27-2011, 11:00 AM
This is not my first audi or even a4 but i have never had a 2000 a4 1.8tqm avant. I have had (2) 99.5 a4 sedans 1.8tqm, 99 a6 avant 2.8 tip, and a 01 s4 2.7tqm.

First off can anyone tell me some specs on my car as far as wieght, what engine code (aeb/atw) it has, and if it is the 150 or 170hp version? Every site i go on says that mentions the 2000 model year may say 150 or 170. Also what ecu box is in my car? Sorry for all the newb like questions.

Also being my last car was a b5 s4 i must know if lemmiwinks is usable on the 1.8t?

Thanks in adavance!

flynnr
10-27-2011, 12:07 PM
only 2001 have 170 iirc

SS92
10-27-2011, 12:17 PM
Every 2000 A4 I have heard of has the bastard engine of the bunch (ATW) Mine included. Some could have AEB, but never seen any on any forums I've been on.

Edit: Didn't see 2000 Avant. So disregard what I said

spinall4
10-27-2011, 12:24 PM
where is the stamp on the engine?

SS92
10-27-2011, 12:57 PM
Mines on the front right side hanging off a tab. Near the TB cover. Also got a sticker, and the # is stamped under the coil packs.

turbo kraut
10-27-2011, 01:13 PM
atw, but it should be stamped on the head(tab sticking out)


not to be a dick, but you say you've owned a few audi's and you don't even know that much about our cars


also you are the 150hp version, 01 was first year of the 170

Seerlah
10-27-2011, 01:25 PM
-2000 is the ATW engine and is an 058 engine block
-AEB bottom end with 20mm wrispins on the connecting rods vs 19mm on the 06A block
-DBW (drive by wire) and small port cylinder head vs large port cylinder head on the AEB eneigne (hence, why it is called the batard child)
-Piston compression I believe is 9.5:1 (you should check this with another source to verify)
-you have 150bhp and only the 01 of the B5 A4 came with 170bhp in the US
-Narrowband primay o2 sensor vs Wideband primary o2 sensor
-I am pretty sure Lemmiwinks only works for the 01 on the B5 A4 (I have this, but never used it yet).

You need to looks up weight elsewhere.

spinall4
10-27-2011, 01:41 PM
thanks guys i thought 01 was the only year that came with the k03s but different info on different sites had me confused. And if not knowing the exact stats of a specific model i have never owned means i dont know shit i guess i dont know shit. Sorry if it has been years since i have touched a 1.8.

Anybody know if lemmiworks does work to tweak our ecu's?

Seerlah
10-27-2011, 03:06 PM
If you have it, try it out. I have it on my laptop and it works on my car, but I have an AWM (01 A4). As I previosly stated, not sure if will work on any other of the ECUs.

csosnowski
10-27-2011, 03:59 PM
my 2000 avant is ATW DBW 150hp engine and ME7.5 - 4B0 906 018 P on the ecu box. yes it is the bastard child.

i havent had the lock carrier off so i do not know if the turbo is k03 or k03s but ive read rumors that there were 'some' that had the k03s. i have to replace the washer pump (cracked) so ill have the lock carrier off here in a few days and i can check then on the turbo.

havent tried lemmi yet, but i do know that ECUx does NOT like this ecu, it makes the car load up and want to stall.

Seerlah
10-27-2011, 04:11 PM
I thought the ATW had an ME5? So, all DBW are ME7?

OP, pardon the thread jack inquiry[cool]

csosnowski
10-27-2011, 04:20 PM
heres a dump from me7check:

================================================== ============================
me7check v1.08 (c) mki, 06/2004-04/2011
Checking file AUDI A4 1.8T ATW 150HP 4B0906018P 0261206537 1037352750.bin (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/
-> Contents of ECUID data table:
- '0261206537' (SSECUHN)
- '1037352750' (SSECUSN)
- '4B0906018P ' (VAG part number)
- '0006' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************

I think you are correct about the dbw cars being ME7, ill try and get a dump from my friends 98 and check it to see what it returns.

rubberband
10-27-2011, 04:36 PM
I am atw and I am under the impression it is a later revision of the ME5. which is ME5.9 versus ME 5.3 on the AEB engines.
tuners dont like this one due to throttle cuts etc
the bastard child theory is that it is not quite an AEB ecu yet definately not a ME7 It is a hackjob of both.

frameshift18
10-27-2011, 05:09 PM
I believe lemmiwinks does work on the 2000 ecus.

rubberband
10-27-2011, 05:42 PM
yes and so does unisettings

spinall4
10-29-2011, 08:05 AM
what is unisettings?

mschneidie
10-29-2011, 04:32 PM
what is unisettings?
Lemmiwinks for USB to OBD-II cables.
Does the same thing.

CCA4
10-30-2011, 06:13 AM
I used to have a link to a website that compared stats between B5 sedans and avants, but I lost it. [:(] As for weight though, IIRC the avant is only about 100lbs heavier