View Full Version : pcv system

10-05-2011, 05:36 PM
can i just run a line from the crank case breather to the intake pipe were the pcv valve is and just delete that vacuum line?

10-05-2011, 06:01 PM
Yes, you can do that. On your ATW, that vacuum line should be going to the suction jet pump (you can delete that too). Personally, when deleting all that crap, I like to retain that vac line and just simply connect it straight to the manifold, rather than go through the Suction Jet Pump and all that jazz. Simplifies it while still keeping a good vac supply to the crankcase at idle.

But yes, you could just go straight to the TIP and call it done if you wish.