Anyone else order from Forgestar before?

[MRxPresident]

I feel like I'm getting the run around from both forgestar and modbargains from wheels i ordered back in june...

first i get the wheels are being machined a month ago... now my wheels are at the powdercoaters for 3 weeks? 3 weeks to powdercoat wheels? wtf is this bullshiet?!?!?!

[Pworld]

A good friend of mines works for them. He says they are pretty backed up. He hates telling customers this, and i feel his pain. but it is crazy right now. They have a pretty high demand, it even surprises me sometimes. Hopefully it is worth the wait. I think it will be.

[MRxPresident]

A good friend of mines works for them. He says they are pretty backed up. He hates telling customers this, and i feel his pain. but it is crazy right now. They have a pretty high demand, it even surprises me sometimes. Hopefully it is worth the wait. I think it will be.

can you give me his contact info... i've been told the wheels are ready 3 different times... but NO shipping.

[Eweezy27]

Just don't order custom forgestar and you should be fine. I was happy with the setup I had for my B7. They were they F05s but they don't carry them anymore.

[LeadToRome]

Just don't order customer forgestar and you should be fine.

Wait. What?

[UmIsThisThingOn]

Just don't order customer forgestar and you should be fine. I was happy with the setup I had for my B7. They were they F05s but they don't carry them anymore.


Wait. What?

I think he meant custom.

[A4rce1]

A good friend of mine works there as well and they do get pretty slammed and items can be backed up from time to time. Great wheels and well worth the wait!

[Eweezy27]

Sorry brain fried after a long week. Yea like I said great wheels but if you don't order a wheel in stock sometimes you might end up waiting longer than you expect. But then again when do you not on quality stuff these days?

[MRxPresident]

They said they had all the parts in stock before I placed the order. Not only that, the point is they said they were at the stages at certain times. I'm starting to feel like I was lied to. I do not like being lied to, when they're at the powdercoaters for 3 weeks on a simple gloss black job... It's a bit of bullshit.

Haha what sucks is I had 5-7 people I was sending them, until I get a truhful answer, I won't send them... They will go straight to ccw.

[riegeraudi]

Read around in other manufacturer forums and all I can say is good luck with Forgestar and Modbargains. Sorry but some had to wait over a year to get them or to get problems solved.

[tgoss]

My best friend ordered some F14's for his B8 A4 and they were unfortunately made to the wrong bolt pattern... First batch took close to 4 months to make, had to send them back and get them remade... Another 2 months of waiting for the correct wheels.

I do like the wheel styles they offer but honestly their delivery time and accuracy of order didn't impress me one bit.

[MRxPresident]

wow... that doesn't make me happy one bit, i'm calling them on monday AGAIN

[Un1k]

I've ordered thru a vender b4..

After about a month, I wanted to change the spec, but they wouldn't let me cuz they already finished working on the block.

A few weeks after that, the vender told me that it's in the powder coating stage.

A few weeks after that, the vender asked me if I wanted to change the specs cuz it turns out the Caststars were going to cut out the block soon... meaning that they haven't done anything in the 2 months of my wait time.

I've posted my experience on here, but it was moved to a different category and never caught attention.

I got a full refund on my deposit and swore off Caststars.

On that thread, I've advised the members to buy 'off shelf' so you know that they have it made and ready, rather than ordering a custom set of wheels.

[ctjibber]

ok so they are rotary forged...and nearly as much as cast so so hows their durability? i have bent two of my stock titanium 5 spokes just from the roads here in ct the will soon be cast off to a permanent winter setup thus bringing me closer to the impossible decision of finding the the perfect summer wheel...

[MRxPresident]

I've ordered thru a vender b4..

After about a month, I wanted to change the spec, but they wouldn't let me cuz they already finished working on the block.

A few weeks after that, the vender told me that it's in the powder coating stage.

A few weeks after that, the vender asked me if I wanted to change the specs cuz it turns out the Caststars were going to cut out the block soon... meaning that they haven't done anything in the 2 months of my wait time.

I've posted my experience on here, but it was moved to a different category and never caught attention.

I got a full refund on my deposit and swore off Caststars.

On that thread, I've advised the members to buy 'off shelf' so you know that they have it made and ready, rather than ordering a custom set of wheels.

how did you get to the bottom of it? You just had to wait for them to call you with their screwup?

[mdma2004]

I would just cancel my order and find a different brand...yeah their wheels might look appealing to some, but customer satisfaction seems to be lacking...ALOT, I also hate when people are lying...similar situation happened with a vendor...long story short ordered wheels, clear coat started peeling after 3 months, had a warranty claim through vendor, no progress in 2 months, dropped the vendor, went straight to the source, got my situation resolved in 3 days.

[Un1k]

how did you get to the bottom of it? You just had to wait for them to call you with their screwup?

Well, I just said 'screw-it' and got the refund from the vendor I ordered from.

So... basically, they went as far as to tell my vendor that I could not change the specs my order because the engineering already began (and a few weeks later that they were powder coating..), to asking me that if I wanted to change the spec because they will start making my wheels soon.

So... I waited 2 months for them to do nothing, and was told that I should expect to wait another 2 months if everything goes right (which was impossible). So I said screw it, I'm not waiting for 4 months for some casts.

If you go custom, they will eff you. One member waited for 4~5 months BEFORE cancelling his order (needless to say that they haven't done much in those wait-time). I just thought it was bad luck for him, but it was all caststars.

caststars asked that member if he was interested in a different wheel (he ordered CF1, they suggested F14 as the wait got longer), and kept telling him that 'it'll be done next week'.

I really hope you get this sorted out, but you should keep in mind that you might wait forever. So it might be better to call it quits and forget about how long you've waited for nothing.

[Un1k]

OK, back from checking my e-mails.

Ordered: March 8th

Denied about change in order because the wheels began production: April 11th

Checked back May 10th (what was thought to be a near ETA date)

************************

The vendor called (not e-mailed) me about if I wanted to change the order because they haven't done shit for the past 2 months, so I don't have a record on what date it was.

But the vendor did call me a few weeks ago to tell me that caststars made the wheel I wanted.

I said I didn't want it.

I don't know if that wheel was made for me (because I cancelled and got a refund before they produced it), or they happen to have that wheel available.

Either way, I don't want anything to do with them.

I don't care if they make the best wheels on the market (they don't), I just don't want even a cent of my money going to the pockets of caststars.

[UmIsThisThingOn]

Sounds like all the BS that was going on with '360' back in the day.

[MRxPresident]

OK, back from checking my e-mails.

Ordered: March 8th

Denied about change in order because the wheels began production: April 11th

Checked back May 10th (what was thought to be a near ETA date)

************************

The vendor called (not e-mailed) me about if I wanted to change the order because they haven't done shit for the past 2 months, so I don't have a record on what date it was.

But the vendor did call me a few weeks ago to tell me that caststars made the wheel I wanted.

I said I didn't want it.

I don't know if that wheel was made for me (because I cancelled and got a refund before they produced it), or they happen to have that wheel available.

Either way, I don't want anything to do with them.

I don't care if they make the best wheels on the market (they don't), I just don't want even a cent of my money going to the pockets of caststars.

k i would cancel but I would only get a 50% refund because modbargains has a 50% only refund policy for special order items... in the mean time another member on here got their wheels (shookatash) and he ordered maybe 10 days before me. I will call tomorrow and figure what the eff is going on. you know, if this was for like honda or acura... i can see this happening but come on man, we should be demanding a higher level of service... not just paying a higher dollar for bullshiet

[shookatash]

k i would cancel but I would only get a 50% refund because modbargains has a 50% only refund policy for special order items... in the mean time another member on here got their wheels (shookatash) and he ordered maybe 10 days before me. I will call tomorrow and figure what the eff is going on. you know, if this was for like honda or acura... i can see this happening but come on man, we should be demanding a higher level of service... not just paying a higher dollar for bullshiet

well i didn't get them yet. my shop told me it would take 2 months when i ordered back in the first week of june. he called me 3 weeks ago saying it would ship in a few days. he then emailed me last week saying that they would ship last wednesday. well, had it shipped on wednesday, (from so cal to norcal) it should be here either last friday or early this week.

here is the quote from my shop that was emailed to me on 8/1. "Your wheels are expected to ship out on Wednesday because they were at the machine shop for Forgestar. "

So i'll let you guys know...

[MRxPresident]

well i didn't get them yet. my shop told me it would take 2 months when i ordered back in the first week of june. he called me 3 weeks ago saying it would ship in a few days. he then emailed me last week saying that they would ship last wednesday. well, had it shipped on wednesday, (from so cal to norcal) it should be here either last friday or early this week.

here is the quote from my shop that was emailed to me on 8/1. "Your wheels are expected to ship out on Wednesday because they were at the machine shop for Forgestar. "

So i'll let you guys know...

yes please let me know, mine was at the machine shop over 4.5 weeks ago, and then they are now at the powdercoaters for over 3 weeks.....

[shookatash]

just called my shop a bit ago and they said they should be done this wednesday...they are getting drilled out now.

[MRxPresident]

just called my shop a bit ago and they said they should be done this wednesday...they are getting drilled out now.

wait drilled out? i thought they were at the powdercoaters already?

[ModBargains.com]

Sydney, we have been doing our best to provide you with the most up to date status on your order and have been giving you all the necessary details to the best of our ability. No, you are not getting the run around, and yes, your wheels will be completed real soon. As we discussed over the phone, it is currently busy season for wheels and all powder coaters here in SoCal are backed up and are working diligently to complete any existing orders (Three to four weeks is not uncommon for a time frame for a powder coating service during busy season). You're not being lied to and we are giving you as much information as we have in regards to the status of your order. Again, they'll be completed reals soon and it'll most definitely be worth the wait. Feel free to contact me directly at 714-582-3330 x 8006 or ask for Alan if you'd like to speak about this in person again.

[shookatash]

Sydney, we have been doing our best to provide you with the most up to date status on your order and have been giving you all the necessary details to the best of our ability. No, you are not getting the run around, and yes, your wheels will be completed real soon. As we discussed over the phone, it is currently busy season for wheels and all powder coaters here in SoCal are backed up and are working diligently to complete any existing orders (Three to four weeks is not uncommon for a time frame for a powder coating service during busy season). You're not being lied to and we are giving you as much information as we have in regards to the status of your order. Again, they'll be completed reals soon and it'll most definitely be worth the wait. Feel free to contact me directly at 714-582-3330 x 8006 or ask for Alan if you'd like to speak about this in person again.

i don't think any of the blame should be put on the vendors of the products. They are "middlemen" of sorts in that they offer the same product that the manufacturer does often at a discounted rate that benefits us the consumer. The info they are giving us is what the manufacturer is telling them (i'm hoping anyway) as they should have no reason to be dishonest with us. I had to wait 8 weeks for my exhaust and now going on 9 weeks for my wheels so far so I guess i'm used to it. =)

Here I am sitting here a bit disappointed in my wait for my forgestars while at the same time watching modbargain's VMR ad in the post above is flashing in my face... haha

[ahcow]

Best of luck OP

The F14 are great looking wheels but I got scared off by Forgestar after reading a lot of bad experiences online for their CS. Hope your order works out fine!

[riegeraudi]

50% refund but you can always go to the credit card companies and see what happens. Like I said do a search using google and you will see all the problems with Forgestar and Modbargains that various people had. Some had horrible wait times, some had horrible finish problems, and others had wheels that didn't fit the car properly and had to wait a whole year for Forgestar to fix it. My advice would be to get your money back and just get another brand of wheels.
Vendors are partially responsible because they choose who they do business with. If they choose to do business with a non reputable company such as Forgestar than they have to take responsibility for any consequences as the vendor could easily not offer products from a manufacturer with horrible customer service.

[MRxPresident]

Sydney, we have been doing our best to provide you with the most up to date status on your order and have been giving you all the necessary details to the best of our ability. No, you are not getting the run around, and yes, your wheels will be completed real soon. As we discussed over the phone, it is currently busy season for wheels and all powder coaters here in SoCal are backed up and are working diligently to complete any existing orders (Three to four weeks is not uncommon for a time frame for a powder coating service during busy season). You're not being lied to and we are giving you as much information as we have in regards to the status of your order. Again, they'll be completed reals soon and it'll most definitely be worth the wait. Feel free to contact me directly at 714-582-3330 x 8006 or ask for Alan if you'd like to speak about this in person again.

I didn't get to speak with Gilbert yesterday however I did finally get a hold of him this morning. He assured me that my wheels are done, and are waiting for the batch to be transported back to Forgestar and then they can be shipped out to me. He told me he was going to call them this morning and get back to me later this afternoon.

[just browsing]

These guys are a piece of work.

Here's a really disturbing thread. OP...you may want to avert your eyes.

http://www.audizine.com/forum/showthread.php/433355-Anyone-ever-order-Forgestar-wheels

Modbargains...you may want to reconsider Forgestar (or CastStar lol) as a supplier. This thread doesn't make you look good.

[riegeraudi]

Reading that thread and many others it almost sounds like a scam. 50% refund policy and few weeks wait turns out to few months wait for many. It's almost like they wish that you cancel the order due to the long wait and then they pocket the 50% without having to supply a product to you.
Also do a search for Iforge wheel problems and it is the exact same thing. Same owners also I believe.

[Un1k]

Reading that thread and many others it almost sounds like a scam. 50% refund policy and few weeks wait turns out to few months wait for many. It's almost like they wish that you cancel the order due to the long wait and then they pocket the 50% without having to supply a product to you.
Also do a search for Iforge wheel problems and it is the exact same thing. Same owners also I believe.

+1, So glad my vendor gave me a full refund on deposit

[mdma2004]

So I was gonna post this bellow, but decided not...oh wait, I just fukin did!


P.S. yes, I am drunk right now...

fuck this shit...fukin bullshit these vendors pullin...as well as these fukin companies, so sick of gettin the fukin run-around...never will buy shit for a vendor/middle man cause all they do is create business out of fukin nothin

unless you put some fire up their ass and get them exposed to the public (which they fukin know will hurt their reputation) they ain't gettin shit done for you...then they are like 'sure, we'll fix our fuck-ups right away, cause we want your fukin money!'

...I deal with middle men/vendors on a constant basis in the printing world so knowing how they get their profits...there's no difference in auto world, fukin scamers

...And this is what grinds my gears!

[riegeraudi]

MrX if you aren't getting your money back I hope you bought 5 of these rims because like someone else said in the other post, what are you going to do if you bend a rim beyond repair?

[apexit1]

No reason it should take so long to make a cast wheel. I can't believe I hadn't heard about these issues before, so happy I never got the forgestars I was considering.

[MRxPresident]

MrX if you aren't getting your money back I hope you bought 5 of these rims because like someone else said in the other post, what are you going to do if you bend a rim beyond repair?

that'll be SHIZZZNITTY!

and if they don't weigh anywhere near what they advertise, we'll have to see what resolution they come up with

[Un1k]

^ what do they advertise? I heard that they were around 25lbs

[MRxPresident]

^ what do they advertise? I heard that they were around 25lbs

• 18x8.5 ET48 - 17.6 Lbs.

• 18x9.5 ET48 - 18.4 Lbs.

• 18x10 ET42 - 18.2 Lbs.

• 18x12 ET68 - 20.0 Lbs

i've noticed that all their light weight wheels are a very high offset. i'm very close to the 18x9.5 with a ET39 so i'll be close to 18.2 - 19lbs

[Un1k]

looking at that other thread says that 19x8.5 weighed at 19.4 lbs.

19x8.5 weighed in at 25.2lbs and advertised at 22.5lbs

I don't know how the 18x10 is less than 18x9.5... but I've seen that a few times when ppl weighed their wheels

[MRxPresident]

looking at that other thread says that 19x8.5 weighed at 19.4 lbs.

19x8.5 weighed in at 25.2lbs and advertised at 22.5lbs

I don't know how the 18x10 is less than 18x9.5... but I've seen that a few times when ppl weighed their wheels

from what they said, the offset has a lot to do with their weight (i called them before i ordered) they did not put the offset on those 19" weights but i'm betting the offsets were like ET 45+

i will weigh my wheels when i get them... gilbert texted me yesterday and said that forgestar said my wheels will be out on thursday

[riegeraudi]

from what they said, the offset has a lot to do with their weight (i called them before i ordered) they did not put the offset on those 19" weights but i'm betting the offsets were like ET 45+

i will weigh my wheels when i get them... gilbert texted me yesterday and said that forgestar said my wheels will be out on thursday

Thursday of which week or year. LOL Anyways good luck with the wheels and keep us posted.

[shookatash]

Thursday of which week or year. LOL Anyways good luck with the wheels and keep us posted.

+1. mine are...again....supposed to ship today...or so...maybe....

[just browsing]

Re: those weights...ironically an employee from a tuning company who sponsors AZ ordered a set for his rs4. When they arrived, they weighed WAY more than forgestar told him, so he immediately put them in the classifieds and ate a loss. I think the difference was 3 lbs per wheel.

[MRxPresident]

Re: those weights...ironically an employee from a tuning company who sponsors AZ ordered a set for his rs4. When they arrived, they weighed WAY more than forgestar told him, so he immediately put them in the classifieds and ate a loss. I think the difference was 3 lbs per wheel.

I have a nasty good attorney and I'm pretty closely tied with some huge names so I'm not too worried

[MRxPresident]

Alright, good news: Gilbert from Modbargains said my wheels are already back at Forgestar and they will ship out tomorrow. Also, he said my wheels weigh 18.9lbs which is within reason! so we shall see when i get them next week and i'll give you a review!

[tahoskier]

Maybe this has something to do with the F14s. I ordered the CF5s on 7/13 and they are telling me they should be done by the end of this week.

[Un1k]

Maybe this has something to do with the F14s. I ordered the CF5s on 7/13 and they are telling me they should be done by the end of this week.

Happy for you :)

but I think it has something to do with Caststars. What I've written above about my personal experience and that other member's experience was about the CF5s

[MRxPresident]

Happy for you :)

but I think it has something to do with Caststars. What I've written above about my personal experience and that other member's experience was about the CF5s

I just got my tracking number, 16th of august

[shookatash]

I just got my tracking number, 16th of august

congrats man! now i need to follow up with my shop to check my status. i ordered 10 days before you (really 4-5 because the shop "forgot" to order them). pics and review of quality when you get them if you can.

[jeffc31337]

Looking forward to pics of the CF5s! I've had my eye on them since they first came out.

Also interested to hear how the work with the hubrings for you guys.

One request I would have is if you could weight one of the wheels with or without tire when you receive them. I was big on forgestar until I saw a thread no e90post where they actually weighted the rim and it was much heavier then advertised. I'm not trying to bash forgestar as there may have been some error but I was hoping to see your guys results!

EDIT: sorry I didn't read the whole thread and someone already brought this up. :)

[MRxPresident]

congrats man! now i need to follow up with my shop to check my status. i ordered 10 days before you (really 4-5 because the shop "forgot" to order them). pics and review of quality when you get them if you can.

absolutely, from what gilbert told me, they're 18.9lbs

[shookatash]

absolutely, from what gilbert told me, they're 18.9lbs

mine should be here monday...shipping today.

[jeffc31337]

Looking forward to the pictures of the CF5s! What offset/size/finish did you wind up going with?

[MRxPresident]

i got the F14s in gloss black 18x9.5 for track use =)

[UmIsThisThingOn]

i got the F14s in gloss black 18x9.5 for track use =)

So you got standard wheels (not special order or deep concave) from them and had to deal with all this BS?
They are definitely off the list for me then...

[MRxPresident]

So you got standard wheels (not special order or deep concave) from them and had to deal with all this BS?
They are definitely off the list for me then...

they are concave, and for our fitment, the standard size is 18x8 according to them, since i wanted 18x9.5 they had to custom make these wheels... why it took so long i have no clue, we'll see if it's worth it

[Un1k]

happy everything worked out for you MRx.

Post lots of pics!

what offset did you go with? you won't see much concave with 9.5 width just to tell you

[Blake P]

absolutely, from what gilbert told me, they're 18.9lbs

Make sure you weigh them. I've heard more than a handful of stories about Forgestars weighing in quite a bit more than the advertised specs.

[MRxPresident]

Make sure you weigh them. I've heard more than a handful of stories about Forgestars weighing in quite a bit more than the advertised specs.

absolutely will!

[MRxPresident]

happy everything worked out for you MRx.

Post lots of pics!

what offset did you go with? you won't see much concave with 9.5 width just to tell you

yeah it's semi concave... like i said they're track wheels

[ModBargains II]

Everybody hates waiting...
I have a great solution for some of you.
I have a set of ready made Forgestar F14s in Gold!

Specs are 19x9" in Race Gold, contact me for offsets and additional information!
Fits A4 and S4

Heres a photo:
http://i.imgur.com/aSi9h.jpg?6682

Again, this set is IN STOCK ready to ship with NO WAIT TIME!

Best Regards,
Jason
[email protected]

[vdubjetta02]

In for the pictures.....

[riegeraudi]

Everybody hates waiting...
I have a great solution for some of you.
I have a set of ready made Forgestar F14s in Gold!

Specs are 19x9" in Race Gold, contact me for offsets and additional information!
Fits A4 and S4

Heres a photo:
http://i.imgur.com/aSi9h.jpg?6682

Again, this set is IN STOCK ready to ship with NO WAIT TIME!

Best Regards,
Jason
[email protected]

Did you mistaken us for the subaru guys? LOL

[tomh009]

Did you mistaken us for the subaru guys? LOL

Exactly what I was thinking!

[ModBargains II]

It only looks like a Subaru if its on a blue car!
Otherwise gold is fair game [;)]

[tahoskier]

i got the F14s in gloss black 18x9.5 for track use =)

What size/brand tires will you be putting on these wheels?

[riegeraudi]

It only looks like a Subaru if its on a blue car!
Otherwise gold is fair game [;)]

I have never seen gold rims on an Audi. I am sure it's out there somewhere, but I haven't seen it yet.

[tahoskier]

I'm just playing Devils Advocate here but I ordered my CF5s in an 18x9 on 7/13. I just got a call that my wheels are ready and they should be at Supreme Power(I ordered them from Eric @ SPP) at the beginning of next week. Maybe it isn't Forgestar with the problem? Or I might just be lucky. Now my next worry is having these fit over my brakes which everyone tells me that they will. Crossing my fingers.

[MRxPresident]

I'm just playing Devils Advocate here but I ordered my CF5s in an 18x9 on 7/13. I just got a call that my wheels are ready and they should be at Supreme Power(I ordered them from Eric @ SPP) at the beginning of next week. Maybe it isn't Forgestar with the problem? Or I might just be lucky. Now my next worry is having these fit over my brakes which everyone tells me that they will. Crossing my fingers.

you could have been lucky and caught the tail end of the batch. if you get caught in the tail of the powdercoating you'll get out fast. if you get caught in the front end, you have to wait for the batch to fill up... i guess in theory

[ModBargains II]

It only looks like a Subaru if its on a blue car!
Otherwise gold is fair game [;)]
Of course its been done!
Here are a few just off the top of my head

http://farm5.static.flickr.com/4101/4809378219_7fe91b6daa_z.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc4/37738_139356306085106_100000322116382_258631_10794 51_n.jpg

[MRxPresident]

alright, scheduled delivery is tomorrow... they couldn't give me a better time than 9am to 7pm... i'm going to end up waiting all friggin day!

[Stereodude]

i'm going to end up waiting all friggin day!That will give you plenty of time to calibrate your scale. [:p]

[MRxPresident]

That will give you plenty of time to calibrate your scale. [:p]

lol already did that... but for other purposes LMFAO =b jp jp

[shookatash]

lol already did that... but for other purposes LMFAO =b jp jp

haha, i might bring my scale to my local shop just to weigh them too before they install them.

[MRxPresident]

haha, i might bring my scale to my local shop just to weigh them too before they install them.

make sure you check the bolt pattern and see if they're correct before you mount tires on them... just cover your tail

[shookatash]

mine are on the car..finally. Sonic Motorsports in Mtn View, CA hooked it up. I didn't want to highjack your thread, so I jsut posted them in the modded wheels/suspension thread that can be seen here:

http://www.audizine.com/forum/showthread.php/396789-B8-S4-Modified-Wheels-amp-Suspension-Gallery-Thread?p=6783608&viewfull=1#post6783608

19x9 et20 24.6lbs naked.

[MRxPresident]

Alright here's some eye candy!

unboxing
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/298303_10150259426227126_506722125_7970734_862446_ n.jpg

19.12lbs
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/301690_10150259475462126_506722125_7971348_8114360 _n.jpg

Nice fitment... but i do rub in the rear =/ (Lou should I raise my car back up? will that help? should i just roll the fenders?)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/297705_10150259645352126_506722125_7972866_7962082 _n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296960_10150259638122126_506722125_7972782_8275198 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/293593_10150259635052126_506722125_7972704_6803115 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/293226_10150259633627126_506722125_7972673_6854951 _n.jpg

[UmIsThisThingOn]

Alright here's some eye candy!

unboxing
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/298303_10150259426227126_506722125_7970734_862446_ n.jpg

19.12lbs
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/301690_10150259475462126_506722125_7971348_8114360 _n.jpg

Nice fitment... but i do rub in the rear =/ (Lou should I raise my car back up? will that help? should i just roll the fenders?)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/297705_10150259645352126_506722125_7972866_7962082 _n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296960_10150259638122126_506722125_7972782_8275198 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/293593_10150259635052126_506722125_7972704_6803115 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/293226_10150259633627126_506722125_7972673_6854951 _n.jpg

Pics/links aren't showing up for me. I can see them in the quote though - weird.

[shookatash]

congrats on the wheels! you braved it out and got them mounted! how do you like them? mine turned out just the way i wanted them.

[MRxPresident]

can a mod close this thread or delete it please, they worked everything out

[Blake P]

can a mod close this thread or delete it please, they worked everything out

As you wish!
http://www.reece-eu.net/gallery/var/resizes/funny/thread-lock.jpg[/img]