View Full Version : B8 S4 wheels on B7 A4 Help
OtisA4
05-27-2011, 01:39 PM
Hi all,
Need a little help here. So i'm picking up a set of 19x8.5 et43 2010 S4 wheels for my b7. I did some searching and I know i'll need hubcentric. What size spacers would I need to get these to fit flush with my fenders? 10 or 15mm?
Thanks for any help.
vbrad26
05-27-2011, 01:47 PM
well most everyone seems happy with 19x8.5et35 so if you went with the 10s you'd be fine
depending on tire size and how low you are, anymore poke than that and you may run into rubbing issues
and not only do you need hucentric spacers you will need hubcentric rings as well...just putting it out there
snopyro
05-27-2011, 02:29 PM
For your hubcentric rings, B7's have 57.1 and B8's have 66.6 center wheel bores. So you can mount B8 wheels on a B6/B7, but you can't mount a B6/B7 wheel onto a B8.
AKBuc
05-27-2011, 02:33 PM
And keep in mind, hub-centric rings CAN interfer /w spacers (I have heard/experianced reports both ways).
OtisA4
05-27-2011, 08:26 PM
Could I get away with not using spacers at all? Probably be tucked under the fenders pretty good huh?
vbrad26
05-27-2011, 08:34 PM
yeah you could get away with it...this is what a 19x8.5et43 wheel with a 215/25/19 looks like with -2deg. of camber
(front only)
http://euromedian.net/wp-content/uploads/2011/01/2.jpeg
Are you sure the oem b8 s4 wheels aren't 19x9 et 43?
vbrad26
05-27-2011, 09:40 PM
if they are the 5 spoke potato peeler looking wheels than i think hes right saying they are 8.5
OtisA4
05-28-2011, 07:10 AM
if they are the 5 spoke potato peeler looking wheels than i think hes right saying they are 8.5
LOL now that you mentioned it. I does look like a potato peeler. Are they 10mm spacers on your car?
unh112
05-28-2011, 07:56 AM
I have B8 wheels on, you will need hub rings + spacers in order to clear the calipers. I have 10 and 8 (F+R).
vbrad26
05-28-2011, 09:38 AM
LOL now that you mentioned it. I does look like a potato peeler. Are they 10mm spacers on your car?
no i have no spacers on the front thats a 19x8.5et43 how it sits
fordyoz
05-28-2011, 04:00 PM
Has anyone put the 18 inch B8 S4 wheels on a B7 yet? I am looking to pick some up soon. Just wondering about fitment and if anyone has used these on a B7 and what size spacers to try first.
http://www.fourtitude.com/news/uploads/Audi_News/s4_b8_header.jpg
mikebo212
05-28-2011, 07:41 PM
i dont see why not, you could easily fit et30 if you wanted too. Some neg. camber should do the work
fordyoz
05-30-2011, 03:35 PM
mike, were you talking to me or the thread starter?
wildcat333
03-21-2013, 02:13 PM
necro bump, but has anyone done this successfully? tried to find some pics, but here I am. thanks.
looking at this style:
http://www.audizine.com/classifieds/data/47/385628_10150833248942126_506722125_9896376_1254149 021_n.jpg
2010 OEM B8 Audi S4 Wheels
Size: 18x8
Offset: ET47
CB: 66.6
Bolt Pattern: 5x112