Dead sexy metal..... Valve cover

[Jeff@RevoUSA]

$499 SHIPPED!!! contact [email protected] to order


Eurojet FSI B7 2.0 & MK5 2.0T CNC Aluminum Valve Cover-

Hands down one of the most dead sexy machined pieces to hit the market in a long time.

Precision machined and crafted to perfection, Eurojet has created the most unique and functional Valve Cover to its arsenal of products. Wipe out your problematic OEM PCV system, relieve crankcase pressure, and eliminate melting plastic valve covers through Eurojet's very own Aluminum Valve Cover.

Specs:

Aircraft Grade Aluminum Material
Proprietary Laser Cut and Pressed Baffles
Machined Oil Cap Replacement with a Tapered Thread for a Perfect Fit Every Time
Maintain OEM EVAP connections
http://www.audizine.com/gallery/data/500/FSI_VC.jpg

[BigRedAEM]

I assume this would solve with the obnoxious oil consumption problem? I'm at about 1000-1100 miles per quart now and Audi said they wouldn't do anything.

[AWDTURBO]

Is there going to be a fitting to prevent us B7 guys from damaging our hoods?

[AWDTURBO]

$499 SHIPPED!!! contact [email protected] to order


Eurojet B7 2.0 & MK5 2.0T CNC Aluminum Valve Cover-

Hands down one of the most dead sexy machined pieces to hit the market in a long time.

Precision machined and crafted to perfection, Eurojet has created the most unique and functional Valve Cover to its arsenal of products. Wipe out your problematic OEM PCV system, relieve crankcase pressure, and eliminate melting plastic valve covers through Eurojet's very own Aluminum Valve Cover.

Specs:

Aircraft Grade Aluminum Material
Proprietary Laser Cut and Pressed Baffles
Machined Oil Cap Replacement with a Tapered Thread for a Perfect Fit Every Time
Maintain OEM EVAP connections
http://www.audizine.com/gallery/data/500/FSI_VC.jpg

yup that fitting will damage our hoods, and that block off plate does not fit the hole for our turbos. This is a picture of the valve cover off a mkv GTI or Jetta.

[SlowGolf]

It fits

http://i600.photobucket.com/albums/tt89/vizierspty/DSCF2762.jpg

[ADV.1 Matt]

Just went from 6 **-> Midnight. Awesome job Statis!

[camoto]

Is there any more info on how this eliminates the stock PVC system? More specifically, how is this plumbed differently?

[Dangler]

yup that fitting will damage our hoods, and that block off plate does not fit the hole for our turbos. This is a picture of the valve cover off a mkv GTI or Jetta.

x2, I can confirm this, and have seen it in person...

[Jeff@RevoUSA]

We lowered the boss on the Valve Cover so that the -10 fitting sits lower. We'll get our B7 in the bay and take photos for everyone

[SlowGolf]

The boss on the valve cover has been lowered on this run so the fitting sits lower. We will have a B7 in here to take pics of it installed later...it fits




Edit Jeff beat me

[20AE428]

Will this come in any colors? Anodized black or Titanium?

[MCT9891]

Will this come in any colors? Anodized black or Titanium?

x2, i think the aluminum looks like shit in our engine bays lol, anodized black looks great.

[SlowGolf]

It can be powder coated if you like for an additional charge

[eastwick897]

I have it powder coated black and it looks clean. Red also looks nice

[Daniel360]

ahem B8S4 please... =)

[Leo14]

^ Hey now! Haha just kidding. OMFG I would kill someone to get this in titanium color. Looks like I get to add another item to the list..

[naiku]

Where to find a spare $499... I could even come pick it up since you guys are not far from me at all. My valve cover looks like crap, and I like to keep the plastic cover off so this would make my engine bay look very nice.

[camoto]

Any info on the PCV question? Thanks

[viziers]

Yes it fits, but unless you have it sitting just right it will then hit the hood.... That is also an somewhat outdated pic as my engine bay has changed slightly to no MBS to a EBC and that pic shows the MBC...



P.S. Eurojet knows this. It was changed I think because Easty or Dougy and I notified them as we were one of the first to try it on our B7's and found the rubbing issue for B7's only (this VC was designed for the transverse motors)......



vizi

[Sprode]

Anodize and you'll have an extra customer here.

[groundround]

what would the total price cost with powder coating?

[Jeff@RevoUSA]

With our valve cover it eliminates the rear pcv hose or side in the B7s case and vents all vapors through the top of the valve cover. From there its sent into the catch tank. We provide a block off for the inlet on your compressor housing. Here are some pics below of the under side so you can see the baffling.

If you guys want them coated its $50

If you have any questions email myself or [email protected]

http://i330.photobucket.com/albums/l434/EurojetRonnie/P5294994.jpg

http://i330.photobucket.com/albums/l434/EurojetRonnie/P5294992.jpg

http://i330.photobucket.com/albums/l434/EurojetRonnie/IMG_0663.jpg

[Ves]

this is probably a nub question, but would this likely void my warranty?

[dropshadow]

Almost certainly.

[GarrettReid]

this is probably a nub question, but would this likely void my warranty?

Does this have any performance benefits? or is it just for looks?

/flame suit

[SoFarGon]

It's cosmetic

[Jeff@RevoUSA]

It eliminates all the factory PCV provisions so none of the blow by oils are sent back into your engine. This coupled with a catch can helps with the carbon build up issue. If your blow by gets bad enough as most VW/Audis do you will get blow by oil into your FMIC and that can hinder the effeminacy of your FMICs cooling

[kristokes]

This would look awesome in anodized black [up]

Any update with the fitment concerns?

[VegasAIV]

This would look awesome in anodized black [up]

Any update with the fitment concerns?

x2!

[Jeff@RevoUSA]

This would look awesome in anodized black [up]

Any update with the fitment concerns?

Posted above


We lowered the boss on the Valve Cover so that the -10 fitting sits lower. We'll get our B7 in the bay and take photos for everyone

[Sprode]

Any chance of a surface finish? Its been asked several times so far...

[Jeff@RevoUSA]

Any chance of a surface finish? Its been asked several times so far...

Yes I posted that above. We can offer powder coating for an additional $50

[GarrettReid]

Any chance of anodized?

JUST KIDDING

[Jeff@RevoUSA]

The fitting doesn't interfere with the hood. Joel and Ronnie are working on a catch can/bracket for it too. Ill have better pics but here is a cell pic for now

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/250626_229283877086766_125421207473034_1122131_699 9672_n.jpg

http://www.facebook.com/photo.php?pid=455721&id=125421207473034
http://www.facebook.com/photo.php?pid=455721&id=125421207473034

[tecnica]

just for fun

http://farm3.static.flickr.com/2656/3847608154_30b602b1bd_b.jpg
http://i28.photobucket.com/albums/c229/sta4541/GetAttachment.jpg
http://i34.photobucket.com/albums/d107/04R32Murse/ej1.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs107.snc3/15453_203363632163_512112163_2998425_905196_n.jpg
http://i18.photobucket.com/albums/b106/Frankenstein_07/IMG_1264.jpg
http://img.photobucket.com/albums/v232/turboinduction/MISC/eurojetvalvecover.jpg

[Eurojet@STaSIS]

As of now here is how the B7 sits. The owner said there is a noticeable change in the way the car drives throughout the whole power band. We also found a lot of blow by oil making its way up past the coil packs. We are working on a bracket for the catch can. Once that is done we will have some more pics

http://i330.photobucket.com/albums/l434/EurojetRonnie/B7VC_1.jpg

[VegasAIV]

oooooooo soooooo pretty. i want it!!

[boarder8888]

Any updates? I want one! Like yesterday!

[Eurojet@STaSIS]

What updates are you looking for? Also...they are all gone. We will give you a heads up when we do another run of them

[boarder8888]

They are all gone?? booo... do you guys sell just the catch can then that will fit the a4?

[Eurojet@STaSIS]

They are all gone?? booo... do you guys sell just the catch can then that will fit the a4?

Unfortunately we do not currently have a can that will fit the A4, however, keep checking back as we're working on it.

[saizero]

the more I see this cover the more I want to buy it. damn...

[Sprode]

the more I see this cover the more I want to buy it. damn...

Yep, this is the next mod on the list.

[Eurojet@STaSIS]

Another shipment of Valve Covers just arrived back in stock! We have a Wrinkle Red, Texture Black, and Machined finishes in stock, ready to ship. Email [email protected], call 888-9STaSIS x121, or follow this link for further information or to order: http://www.eurojetracing.com/ProductDetails.asp?ProductCode=MK5VC

We only have 1 Wrinkle Red and 1 Texture Black at the moment. If you're interested in either of them, email me or call!