3M Carbon Wrap?

[AUDIFREAK23]

Hey everyone,

Im thinking of trying this on my piano trim that I have, because to be honest Im no t a fan of the piano trim. I have always had the dark would trim in my audi's in the past and I loved it, I just cant find any sets. So, that brings me to the 3M vinyl Carbon wrap. Not sure about this stuff, im really kind of picky and I want to try and make sure it will look clean before I buy it. Any help or suggestions would be appreciated!
thanks

[bez101]

iv done a few and they look good
very easy to apply

[vhstejskal]

I've done my interior with the wrap... It's really easy to install and if you have to peal it off of the trim I've found no damage to the original finish. I know because I had to redo my panel after scratching it with a screw driver.

[Schmaud]

I'll trade you my wrapped trim for your piano trim :)

[tonys1832]

It's decently simple to install. I'm extremely picky and after having it on a few days I pulled it off and have decided to go with the stuff from ocarbon. The vinyl looks nice if you want to kind of go the cheap route but you can tell it's vinyl ya know. I guess it's one of those "you get what you pay for" kinda deals. Ocarbon full trim set is $500 but it's all real trim - vinyl will run $20-50 bucks.

If you go with the vinyl - get it off ebay - it's much cheaper than most places.

[dA4n600rr]

Hey everyone,

Im thinking of trying this on my piano trim that I have, because to be honest Im no t a fan of the piano trim. I have always had the dark would trim in my audi's in the past and I loved it, I just cant find any sets. So, that brings me to the 3M vinyl Carbon wrap. Not sure about this stuff, im really kind of picky and I want to try and make sure it will look clean before I buy it. Any help or suggestions would be appreciated!
thanks

here is an example of how well it can turn out.. this is not 3m.

https://www.facebook.com/?ref=logo#!/media/set/?set=a.10150193588628840.327391.127511233839

apparently better stuff though..

[DreDay]

^ that looks pretty good

[ECS Tuning-Audi]

We have it available below!

Click HERE to order or for more information. (http://www.ecstuning.com/Audi-B7_A4-Quattro-2.0T/Interior/DiNoc_Film/Carbon_Fiber/?salesrep=JMarusic&utm_source=audizine&utm_medium=forum&utm_content=JMarusic&utm_campaign=postreply)
http://c1552172.r72.cf0.rackcdn.com/82032_x600.jpg (http://www.ecstuning.com/Audi-B7_A4-Quattro-2.0T/Interior/DiNoc_Film/Carbon_Fiber/?salesrep=JMarusic&utm_source=audizine&utm_medium=forum&utm_content=JMarusic&utm_campaign=postreply)
Let me know if you have any questions.

Jason

[dropshadow]

I'll trade you my wrapped trim for your piano trim :)

I'll trade you my aluminum trim for your wrapped trim :)

... or for the OP's piano trim.

[AUDIFREAK23]

let me see picks of the wrapped trim and I might be interested in doing that

[Schmaud]

I will take some tonight. PM me your email.

[AUDIFREAK23]

It's decently simple to install. I'm extremely picky and after having it on a few days I pulled it off and have decided to go with the stuff from ocarbon. The vinyl looks nice if you want to kind of go the cheap route but you can tell it's vinyl ya know. I guess it's one of those "you get what you pay for" kinda deals. Ocarbon full trim set is $500 but it's all real trim - vinyl will run $20-50 bucks.

If you go with the vinyl - get it off ebay - it's much cheaper than most places.


Ya, I just cant justify spending 500 for trim ya know...

[AUDIFREAK23]

I will take some tonight. PM me your email.

ur pm is full

[AUDIFREAK23]

if anyone has the dark wood trim, i would be intersted in that too

[kaklexicon]

It's decently simple to install. I'm extremely picky and after having it on a few days I pulled it off and have decided to go with the stuff from ocarbon. The vinyl looks nice if you want to kind of go the cheap route but you can tell it's vinyl ya know. I guess it's one of those "you get what you pay for" kinda deals. Ocarbon full trim set is $500 but it's all real trim - vinyl will run $20-50 bucks.

If you go with the vinyl - get it off ebay - it's much cheaper than most places.

^this did the same thing, wrapped the whole interior trim, used a blow dryer to wrap around the corners nicely.. but then the first 85 degree day hit and I could see some edges start to peel. I'm ready to go with oCarbon.

[Schmaud]

Cleaned out my inbox.

[Silver_Knight]

I have dark wood for automatic if you wanna trade ^_^

[Macdoon]

Hey everyone,

Im thinking of trying this on my piano trim that I have, because to be honest Im no t a fan of the piano trim. I have always had the dark would trim in my audi's in the past and I loved it, I just cant find any sets. So, that brings me to the 3M vinyl Carbon wrap. Not sure about this stuff, im really kind of picky and I want to try and make sure it will look clean before I buy it. Any help or suggestions would be appreciated!
thanks

There are plenty of threads of carbon wrapping, here's mine
http://www.audizine.com/forum/showthread.php/417400-My-Anthracite-carbon-wrap-pics

Mac

[makav3li]

I wrapped my whole trim and really liked it for the first 2 weeks, then I started seeing imperfections and couldn't handle it, Ocarbon is making me a set as we speak :)

[AUDIFREAK23]

I have dark wood for automatic if you wanna trade ^_^

I would, but I have a manual :(

[Quattro]

Spending $500 on carbon fiber trim is a lot of money, but I personally think it is worth it. I've been running ocarbon trim and had to wait like everyone else and was worth the wait and the quality you receive from them is great. Most people are concerned with outside appearance, but neglect the interior where you spend most of your time. It's pretty badass when you glance down and notice your cf trim while you are driving, even more so when you enter your car and are able to take in the beauty of carbon fiber :D

CF trim & recaro seats = mandatory!

[adub]

Spending $500 on carbon fiber trim is a lot of money, but I personally think it is worth it. I've been running ocarbon trim and had to wait like everyone else and was worth the wait and the quality you receive from them is great. Most people are concerned with outside appearance, but neglect the interior where you spend most of your time. It's pretty badass when you glance down and notice your cf trim while you are driving, even more so when you enter your car and are able to take in the beauty of carbon fiber :D

CF trim & recaro seats = mandatory!

x2

[freaksavior]

I wrapped my whole trim and really liked it for the first 2 weeks, then I started seeing imperfections and couldn't handle it, Ocarbon is making me a set as we speak :)

I did the same. It look cool for about a week then I started to hate it. Went with a diy brushed aluminum and love that.

[matt@oCarbon]

Should I do some discounts for people with the fake stuff that want to upgrade to the real thing?

Email me at [email protected] if you're interested.

[A4_Ti]

Should I do some discounts for people with the fake stuff that want to upgrade to the real thing?

Email me at [email protected] if you're interested.

I'm saving my pennies for the real thing as we speak, can't stand the piano black trim in my car, shows scratches waaay too easily

[RedS-line]

The real stuff is gorgeous, but if you take your time and take pride in your work, then using the 3m di-noc will produce excellent results. im a believer :)

[abccba]

This is what it looked like in my B6:

http://wohoo.ca/audizine/IMG_0070.JPG

http://wohoo.ca/audizine/IMG_0071.jpg

[elwigglero]

Don't wrap piano black trim. Sell/trade+cash your trim to someone that will use it and get some fake wood or aluminum trim to wrap.

[A4_Ti]

Don't wrap piano black trim. Sell/trade+cash your trim to someone that will use it and get some fake wood or aluminum trim to wrap.

smart feller, when the time comes I'll look for a trade + cash for some fake woodies, no one like woodies, except the few ppl posting to say they like woodies