PDA

View Full Version : AUDI S4 SINGLE TURBO BY EDGE MOTORS !



Pages : [1] 2 3

UkuRiSh
05-19-2011, 08:47 PM
hello everyone .

BUILD BY www.Edge-Motors.com
TUNE BY www.eurodyne.ca
TUNE BY www.jfonztuning.com

BIG THANKS TO : Sergei From Edge Motors , Alex , Steve , Sergei (Motvey) , :)


STOCK 2.7 BLOCK >>>>> (2012) BORE To fit 81MM PISTONS >>>>>>>(2014) New Block BF bored to fit 83MM JE Pistons
STROKE >>>>> (2012)92.8 Stroke >>>>>>>(2014) 92.8 Stroke
STOK PISTONS >>>>> (2012)JE 81 MM With 8.5:1 Compression ratio >>>>>>>(2014) JE 83MM 9.0:1
IE ROD'S
ARP MAIN STUD
ARP HEAD STUD
TURBO PRECISION CEA 6266 T4 .81 A/R and .68 A/R ceramic ball bearings billet wheels >>>> (2012) UPGRATE TO T4 .68 A/R
CUSTOM TURBO MANIFOLD WITH 2.8 HEADERS
PRECISION 46mm Wastegate
PORTED 2.8 HEAD , With Supertech Valve Spring/Titanium Retainer , inconel exhaust valves and intake .
NEW OEM Timing Chain Tensioner Left and Right
GATES RACING BLUE TIMING BELT
FSI Coil Conversion and ICM Delete Harness for the 2.7T
Injector Dynamics fuel injectors 1000CC
MVP 5000 MAF Sensor and 3.5" pipe
FUEL FEED LINE -8 AN
FUEL RETURN LINE - 6 AN
Walbro High-Pressure 400LPH E85 Fuel Pump in tank
FUELLAB Pump in line
Prosport EVO Wideband Digital Air Fuel Ratio kit Guadge
Prosport EVO Boost Guadge
Prosport EVO Fuel pressure Guadge
Prosport EVO Oil Guadge
034 FUEL RAIL
ELECTRIC FUELAB FPR 529 series
CUSTOM ENGINE OIL COOLER -10 AN
CUSTOM DOWN PIPE 3" by EDGE-MOTORS
CUSTOM CAT BACK 3" With Two Vibrant Mafflers by EDGE-MOTORS
PRECISION FRONT MOUNT INTERCOOLER CUSTOM PIPING BY EDGE-MOTORS
TIAL BLOW OF VALVE
DEVILOWN W/M Controller up to 30 psi , Pump , 750 cc/m , hook up to OEM windshield fluid container
TILTON TWIN DISK CLUTCH
JHM SHIFTER
USP Motorsports Stainless Steel clutch lines and Metal slave cylinders
ALL NEW FRONT AND REAR CONTROL ARM'S AND BUSHINGS
034 DIFF CARRIER MOUNT
034 SNUB MOUNT
ASP TRANSMISSION STABILIZER BAR
ASP TRANSMISSION MOUNTS
ASP REAR DIFFERENTIAL MOUNT
STERN ENGINE MOUNT
FK COILOVER
HOTCHKIS FRONT & REAR SWAY BAR
ECS STIRLING PULLY
ALPINE SOUND SYSTEM AND KENWOOD 12" SUB
REBUILD TRANNY WITH JHM KIT "

Much More ,,, -AN custom line's oil , antifreeze , stirling


http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P1190044.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P1190046.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P2170087.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/2.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_0709.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_1315.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_1308.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P1220049.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_1317.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P2170089.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/DSC00502.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P3110124.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P3310127.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P4020132.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_0781.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_0764.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_0774.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_1532.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/IMG_0782-1.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P2220098.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/AUDIZINE/IMG_0740-Copy.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/AUDIZINE/IMG_0739-Copy.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/AUDIZINE/IMG_0747.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/AUDIZINE/IMG_0726.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P4020143.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/SINGLE%20TURBO%20PROJECT/P2220095.jpg



29 PSI RUN

http://www.youtube.com/Ggq8jqCUaBM&feature


DYNO 600WHP / 600WTQ

30 PSI + METH , 93 OCT



http://youtu.be/atjIqS9tfCE




1/4 BEST WAS 11.4 @ 128


http://www.youtube.com/rByTzZB3T8w



http://www.youtube.com/-RMN2Q0s_Kk

cjk
05-19-2011, 08:54 PM
Nice work man! look forward to what kind of power it makes when fully tuned.

UkuRiSh
05-19-2011, 10:10 PM
Nice work man! look forward to what kind of power it makes when fully tuned.

Thanks man . I Need weld the intercooler piping and install oil coller , sterling coller . But car is running man and i'm so happy :) two more weeks and i'm goin for tune .

bondar1989
05-19-2011, 10:17 PM
absolutely amazing

nJoy
05-19-2011, 10:19 PM
Beautiful!

Spooled1.8
05-19-2011, 10:21 PM
Great job, loving all of the upcoming single builds!

NKI 337
05-19-2011, 10:30 PM
WOOOWW!!! AMAZING!!!!!
So jealous!!

JackalS4
05-19-2011, 11:34 PM
Jaw-dropping! Love it! [up]

MLJS4
05-19-2011, 11:35 PM
nice job man more videos after tune! whos tuning it?

MadProfessor
05-20-2011, 12:04 AM
I LOVE how fat those log manifolds are...I am excited about all the headway with single builds! Looking forward to more! Thanks for sharing.

390wheel
05-20-2011, 06:12 AM
I LOVE how fat those log manifolds are...I am excited about all the headway with single builds! Looking forward to more! Thanks for sharing.

most likely Kevin Black will be tuning it....

McGovs2.7TB5
05-20-2011, 06:18 AM
sweet build, can't wait to see some numbers.

NYCVR6
05-20-2011, 07:17 AM
most likely Kevin Black will be tuning it....

Very good choice.. I've known Kevin for years, he tuned my car and will be tuning it again in June... Looks like a very nice build.

A4 TSCHUSS
05-20-2011, 09:22 AM
Curious on your choice of the 6265 over just the 6262? Everything that I have heard says that it doesn't produce any more power worth having and you just deal with more lag from the bigger turbine wheel since its only benefit would be to sustain boost (power) at higher rpms which will not even be remotely close to the rpms your car will be running. This was reading from guys who run/own Evo performance shops who use mostly Precision turbos on their shop/customer cars.

Mr. Merk
05-20-2011, 09:26 AM
i spy harbor frieght screwdrivers, sweet build

034Motorsport
05-20-2011, 09:32 AM
Juiced to see a PT running on an S4!

Seems like now everyone and their mom is doing a single turbo build!!!

UkuRiSh
06-11-2011, 02:12 PM
Some update ! still working on the car fixing small things .

http://www.youtube.com/watch?v=jz-YE60srGE

Mattgfx
06-11-2011, 02:41 PM
awesome dude, the motor looks great all painted up

pipe7284
06-11-2011, 03:51 PM
sexy shit!!!! congrats

fdation
06-12-2011, 12:06 AM
nice

gablks4
06-12-2011, 12:48 PM
that's amazing and insane. how much hp and tq you think you can get that beast to? i would like to see it run a quarter mile, reminds me of the single big turbo supras back in the dayz those hit 1000hp i believe.

UkuRiSh
06-12-2011, 04:44 PM
that's amazing and insane. how much hp and tq you think you can get that beast to? i would like to see it run a quarter mile, reminds me of the single big turbo supras back in the dayz those hit 1000hp i believe.


It's not tune yet ! I gonna run the car at Waterfest 17 first day 1/4 mile , second day dyno :)

NishadJoshi
06-12-2011, 04:57 PM
Word? Nice! Numbers!?

UkuRiSh
06-26-2011, 08:55 PM
Thanks guys . Some new vid whit more power .

New File from EuroDyne 23-25 Psi feel's good :)


Video **-> 23-25 Psi Sorry it's little long video , skip to 3:05 if you dont whant wait :)



http://www.youtube.com/watch?v=If6dYCbVDcU&hd=1

BoostinonYOU
06-26-2011, 09:00 PM
Such a tease, the first two minutes you kept shifting right when you were about to be in the boost :/

BoostinonYOU
06-26-2011, 09:08 PM
Sounds wonderful though :D

jamestown478
06-26-2011, 10:06 PM
I want ur steering wheel lol

michael66899
06-26-2011, 10:11 PM
Mmm jealous, can't wait to get mine up and running. Hows the lag so far, also how is it in transient throttle? How would you compare it to say a standard K04 car? Can't wait to see more videos and results, best of luck with the tune!

S4 00 2.7
06-26-2011, 10:15 PM
Nice build and clean work.

UkuRiSh
06-26-2011, 10:31 PM
Mmm jealous, can't wait to get mine up and running. Hows the lag so far, also how is it in transient throttle? How would you compare it to say a standard K04 car? Can't wait to see more videos and results, best of luck with the tune!

Nice!! what turbo are you will run ? 15 psi hit by 4300k and by 4700-4800 full boost , the car won't move 0-3500 rpm :) so yes it's a lagg if compare k04's but power is insane after 4700k it's feels like a jet take off :)

Das General
06-26-2011, 11:24 PM
Nice work man!

UkuRiSh
06-27-2011, 12:07 AM
Nice work man!

Thanks man , how is your car ?

highspeeds4
06-27-2011, 02:09 AM
1st off, your car is sick

I would love to see this car vs. Tial 770s or Gt28rs

This thing sounds mean as hell. Great job...........now start marketing this kit also ;-)

Das General
06-27-2011, 12:41 PM
Thanks man , how is your car ?

It drives. It has small oil leak that needs to be fixed... and the tune needs to be tweaked to get it to run smoothly. As of now it stalls in first with the clutch in. My guess is it has to do with the lack of air being metered without a MAF.

UkuRiSh
06-27-2011, 02:13 PM
I Just gave a call to EPL guy's to put my car on dyno they are located very close to me , they told me : " we use dyno only for tune " and they can't tune maesro 7 Soft :( , i'm looking for local dyno to finish my tune & Dyned .

Evilevo
06-27-2011, 07:34 PM
I Just gave a call to EPL guy's to put my car on dyno they are located very close to me , they told me : " we use dyno only for tune " and they can't tune maesro 7 Soft :( , i'm looking for local dyno to finish my tune & Dyned .

What? They tuned my car to 600whp on pump/meth on the stock ME7 ECU.

UkuRiSh
06-27-2011, 07:43 PM
What? They tuned my car to 600whp on pump/meth on the stock ME7 ECU.



Maybe the problem is because i got already tune , i almost done just need final tune :(

Evilevo
06-27-2011, 07:45 PM
Maybe the problem is because i got already tune , i almost done just need final tune :(

I mean, they can tune you. But you are going to have to pay full price for the tune. They will use their own base file and tune from there. Most likely need their big MAF kit too

UkuRiSh
06-27-2011, 07:54 PM
I mean, they can tune you. But you are going to have to pay full price for the tune. They will use their own base file and tune from there. Most likely need their big MAF kit too

I was asking just to put my car on dyno ! whatever i'm just looking for nearest dyno shop .

Evilevo
06-27-2011, 07:57 PM
I was asking just to put my car on dyno ! whatever i'm just looking for nearest dyno shop .

There is a Dynojet that we used one time. I don't remember the name.though.

Das General
06-27-2011, 08:12 PM
Sean Ivey has a dyno just south of the city. Check out Iveytune.com

UkuRiSh
06-27-2011, 08:14 PM
Sean Ivey has a dyno just south of the city. Check out Iveytune.com

I got one Shop 1.5 hour from me , but nobody picked up the phone , i'll try tomorow again .

8 Sympaug Park Road, Bethel, CT 06801 (203) 748-1115 ‎ www.efilogics.com

UkuRiSh
06-28-2011, 10:09 AM
Sean Ivey has a dyno just south of the city. Check out Iveytune.com

I just called this compony and they told me they do not tune the Audi :(

Evilevo
06-28-2011, 10:15 AM
I just called this compony and they told me they do not tune the Audi :(

Stop asking about tuning. Just say you want 3 dyno pulls or you want to use the dyno on an hourly basis.

UkuRiSh
06-28-2011, 10:31 AM
Stop asking about tuning. Just say you want 3 dyno pulls or you want to use the dyno on an hourly basis.

I did ask just about hourly basis dyno but they keep saying we use only to tune the car , whatever man any way waiting for Kevin Black to finish my tune for the time B just wonna see the nubers on base file .

Evilevo
06-28-2011, 07:47 PM
I did ask just about hourly basis dyno but they keep saying we use only to tune the car , whatever man any way waiting for Kevin Black to finish my tune for the time B just wonna see the nubers on base file .

Sorry man, it just came off like you were asking the wrong questions.

There have got to be some dynos in that area that will let you do some pulls. Maybe check out ICS

Vinchenzo51
06-28-2011, 08:13 PM
There have got to be some dynos in that area that will let you do some pulls. Maybe check out ICS

ICS will let you make a pull for just numbers purposes but you have to deal with the asshole people there. Up to you I guess.

UkuRiSh
06-28-2011, 08:40 PM
Sorry man, it just came off like you were asking the wrong questions.

There have got to be some dynos in that area that will let you do some pulls. Maybe check out ICS

This boys call me back they charge $ 100 three pull not bad . http://www.efilogics.com/about.html Mustang Dyno AWD-500 SE

Das General
06-28-2011, 08:59 PM
This boys call me back they charge $ 100 three pull not bad . http://www.efilogics.com/about.html Mustang Dyno AWD-500 SE

Not worth it if you need to tune.

UkuRiSh
06-28-2011, 09:22 PM
Not worth it if you need to tune.

I Just wonna see how good is new file , i did some changes on file my self

ScratchRob13
07-02-2011, 12:00 PM
turbo-kits.com in Windosr Locks has a mustang dyno... it's a subie shop too, and I cannot remember the name now. Jesse is the guy I talk to there.

Das General
07-02-2011, 12:03 PM
there is also The Shop in Norwalk.

Aphex350
07-02-2011, 02:32 PM
That thing RIPS. God my car is so slow now :(

SpeedWorksAuto
07-06-2011, 09:28 PM
Are your O2 sensors before your turbo?

UkuRiSh
07-07-2011, 09:22 AM
Are your O2 sensors before your turbo?

02 and EGT is before turbo .

s2the4
07-07-2011, 09:59 AM
there is also The Shop in Norwalk.

2ND that! and they have my favorite dyno! which is a dyno dynamics.

Evilevo
07-07-2011, 10:12 AM
02 and EGT is before turbo .

Pretty sure they should be post turbo

NOTORIOUS VR
07-07-2011, 10:33 AM
Pretty sure they should be post turbo

Yup...

The poor O2 sensor won't survive long pre-turbo that's for sure...

v dub'n
07-07-2011, 11:32 AM
Wow dont people in NY rent dyno's. Call Turbotrix in NJ I'm sure they will help you out.

AudiSportB5S4
07-07-2011, 11:49 AM
I know of a dyno near Poughkeepsie, NY if you'd like to talk to him about it..

Das General
07-07-2011, 12:58 PM
Pretty sure they should be post turbo

Not really. You can use a heatsink for the O2's and they will be just fine.

UkuRiSh
07-07-2011, 01:03 PM
I know of a dyno near Poughkeepsie, NY if you'd like to talk to him about it..

Thanks man it's close of my house do you have a phone number ?

My car not gonna be ready before waterfest :( so let's see what base file can do on 1/4 mil and on dyno at waterfest :)

stage3s4
07-07-2011, 02:09 PM
did you find some to tune your car?

SpeedWorksAuto
07-07-2011, 05:44 PM
Please explain heatsink for O2. I am trying to figure out some details.

UkuRiSh
07-07-2011, 09:30 PM
did you find some to tune your car?


Tuner is Kevin Black

http://www.lugtronic.com

Speedyj
07-08-2011, 03:01 AM
what s/wheel do you have..is it a tt ?

NOTORIOUS VR
07-08-2011, 05:19 AM
Not really. You can use a heatsink for the O2's and they will be just fine.

But why would you bother... It reads just fine post turbo further down stream just like it is on every other car.

UkuRiSh
07-08-2011, 08:12 AM
VMR 709 19x8.5 whit RS4 8 POT brake and rotor .


http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/P9130147.jpg

gerdaland
07-08-2011, 08:35 AM
there is a mustang awd dyno right in poughkeepsie www.powerplantmotorsports.com

UkuRiSh
07-08-2011, 09:58 AM
there is a mustang awd dyno right in poughkeepsie www.powerplantmotorsports.com

Thanks .

SpeedWorksAuto
07-08-2011, 11:54 AM
But why would you bother... It reads just fine post turbo further down stream just like it is on every other car.

I am trying to keep the banks separate like they are factory. If they are in the dp then there will be at least two wbo2 right next to each other and the egt's if I don't have them coded out

GWerks
07-08-2011, 12:00 PM
=0

Das General
07-08-2011, 12:02 PM
But why would you bother... It reads just fine post turbo further down stream just like it is on every other car.

Some say for more accurate readings. Others want to read the individual banks. I personally put mine in the same downpipe with no issues.

A heatsink is similar to a spacer, it pulls the o2 farther from the manifold but has little slots to read the air/fuel ratio.

UkuRiSh
08-10-2011, 06:50 PM
http://www.youtube.com/watch?aTAi9T6QSbs

bigern45
08-10-2011, 10:33 PM
nice.. but no accel vids? come on.. you know what gets us going..*smh*

034Motorsport
08-11-2011, 10:42 AM
No motor rev or turbo sound??

Kittrell
08-21-2011, 02:03 AM
what s/wheel do you have..is it a tt ?

Looks like a B6 Alcantara sport wheel with a TT airbag.

UkuRiSh
08-21-2011, 09:20 PM
No motor rev or turbo sound??

After a make this video I was in the way to home guss what on highway my timing belt snap , the hydraulic dampener was bad and by the time belt loose and snap , 8 valve is bend , pistons look's Ok , almost finish rebuilding my head with new valve , so this kind shit happens to me :(


http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0897.jpg

bigern45
08-21-2011, 09:31 PM
After a make this video I was in the way to home guss what on highway my timing belt snap , the hydraulic dampener was bad and by the time belt loose and snap , 8 valve is bend , pistons look's Ok , almost finish rebuilding my head with new valve , so this kind shit happens to me :(


http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0897.jpg[=(][:(] sorry bro. that sucks. *smh*

UkuRiSh
08-21-2011, 09:38 PM
[=(][:(] sorry bro. that sucks. *smh*

yeah man shit happens ,, by next friday i should finish the car

http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0956.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0947-1.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0895.jpg

jettaglx91
08-22-2011, 05:11 AM
how high does this thing rev? (just a coincidence to the bent valves thats not why i was asking)

Its an awesome build but imagine will be in the 7.5K range maybe? The only problem i see is such a short power bad, if not already hanging at 5k rpm a ko4 car would have a 100yds on you before making boost.

With stock displacement i would think the slightly small turbo or turbine would be helpful

diabolical1
08-22-2011, 05:11 AM
sucks, man. i guess it could have been worse though. good to see you're getting it back together already.

UkuRiSh
08-22-2011, 07:41 AM
how high does this thing rev? (just a coincidence to the bent valves thats not why i was asking)

Its an awesome build but imagine will be in the 7.5K range maybe? The only problem i see is such a short power bad, if not already hanging at 5k rpm a ko4 car would have a 100yds on you before making boost.

With stock displacement i would think the slightly small turbo or turbine would be helpful



Yes the range is 7.5 - 7.8 rpm , full boost hit at 4800 and 15 psi at 4200 so it's not that bad even 770r on 2.7 stock block see full boost close to 4k , i'm not afraid a lag other wise i just keep my old K04 . In the future i will buy second turbo Precision 5857 / 6062 it will spool like K03 and make near 550 whp for me to change the turbo it will take 1 hour " 6265 for big powa and 5857/6062 for dealy .

bigern45
08-22-2011, 09:30 PM
how high does this thing rev? (just a coincidence to the bent valves thats not why i was asking)

Its an awesome build but imagine will be in the 7.5K range maybe? The only problem i see is such a short power bad, if not already hanging at 5k rpm a ko4 car would have a 100yds on you before making boost.

With stock displacement i would think the slightly small turbo or turbine would be helpfullol. what?? 100 yards. really? dont think so.

sfored
08-22-2011, 11:17 PM
FAAK.. Happened to me as well.. same thing ... tensioner .. . Bent 2..Sorry to hear ..good luck.
What type of fans are those blue fans up front ? Quiet ? Any CFM or link to site ?

UkuRiSh
08-23-2011, 08:48 AM
FAAK.. Happened to me as well.. same thing ... tensioner .. . Bent 2..Sorry to hear ..good luck.
What type of fans are those blue fans up front ? Quiet ? Any CFM or link to site ?

Those fans from Ebay :) chep shit but working for me : http://cgi.ebay.com/ebaymotors/7-THIN-SLIM-12-V-ELECTRIC-PUSH-PULL-BLUE-RADIATOR-FAN-/290599361507?pt=Motors_Car_Truck_Parts_Accessories&hash=item43a9125be3

sfored
08-24-2011, 10:16 PM
Those fans from Ebay :) chep shit but working for me : http://cgi.ebay.com/ebaymotors/7-THIN-SLIM-12-V-ELECTRIC-PUSH-PULL-BLUE-RADIATOR-FAN-/290599361507?pt=Motors_Car_Truck_Parts_Accessories&hash=item43a9125be3
thank you .. wow.. can you rely on those ? 7" ? would 2-12s fit ?

UkuRiSh
08-25-2011, 10:54 PM
Finish work on my car by 1:00 AM I'm so exhausted :) but i have some proggres , need connet catback with new mufler , wastegate , headlights .



http://i831.photobucket.com/albums/zz234/UkuRiSh/MY%20S4%20%20B5%20and%20b8/IMG_0876.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_0961.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_0963.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_0965.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_0968.jpg

http://www.youtube.com/watch?fZBlvbiZlQs

Eurotechnik
09-08-2011, 06:22 PM
saw your car on rt59, right by my work.. sounds great. stop by my work at wideworldbmw, i'd love to check your single set-up!

UkuRiSh
09-08-2011, 09:29 PM
saw your car on rt59, right by my work.. sounds great. stop by my work at wideworldbmw, i'd love to check your single set-up!

Hey thanks ,,, sure i can stop by are you working evrey day?

foxhound720
09-11-2011, 10:23 AM
Dear Edge motors or original poster,

When can you start working on my single turbo setup ?

UkuRiSh
09-11-2011, 01:49 PM
What are you talking about ?


Dear Edge motors or original poster,

When can you start working on my single turbo setup ?

foxhound720
09-11-2011, 03:08 PM
Well its a joke as in I like your setup so much, I want one. So when can you start lol.

UkuRiSh
09-11-2011, 04:39 PM
i'll right ,, just buy my car :)


Well its a joke as in I like your setup so much, I want one. So when can you start lol.

foxhound720
09-15-2011, 06:27 PM
Uh well.... If I have to.

UkuRiSh
09-15-2011, 09:38 PM
Finally i did dyno pull on my base file three run's on 93 oct no Meth yet , 19psi and 10* timing car was little lean , then i'm add some boost to 22-23psi just add me like 1 whp and some tq lol



http://youtu.be/oYV2hKvmy9w

Hyphy
09-15-2011, 09:49 PM
afr looking rough

Evilevo
09-15-2011, 09:51 PM
afr looking rough

AFR is lean. And good god that car is laggier than mine.

UkuRiSh
09-15-2011, 09:57 PM
when tune will be complete should spool up much faster and more power [wrench]

Eurotechnik
09-15-2011, 10:01 PM
Yup, i'll be in pre-owned tomorrow (Friday).

-Teddy

Hyphy
09-15-2011, 10:43 PM
AFR is lean. And good god that car is laggier than mine.

After assuming the computer was showing results a bit late, I saw high 12's across the board throughout the pull, a little too lean if i may say so myself.

Don Supreme
09-16-2011, 08:38 AM
As you already know, its lean and needs tuning.

It made good power @ 19 psi... Keep at it.

UkuRiSh
09-16-2011, 10:24 AM
http://i831.photobucket.com/albums/zz234/UkuRiSh/DYNO.jpg

UkuRiSh
09-16-2011, 10:28 AM
AFR is lean. And good god that car is laggier than mine. ha yes it's is lag

Evilevo
09-16-2011, 10:56 AM
ha yes it's is lag

Do you have a T4 turbine on there?

UkuRiSh
09-16-2011, 10:59 AM
Yep , cant wait any more to see 28-30 psi


Do you have a T4 turbine on there?

Evilevo
09-16-2011, 11:03 AM
Yep , cant wait any more to see 28-30 psi

if you went to a T3 that would help your spool a lot. What is your overall power goal?

UkuRiSh
09-16-2011, 11:08 AM
if you went to a T3 that would help your spool a lot. What is your overall power goal?


600-650 whp just on pump no meth .

GURUMAN
09-16-2011, 11:08 AM
I would suggest trying the T3 0.82 turbine housing on stock displacement.

TweetsS4Estate
09-16-2011, 11:20 AM
I would suggest trying the T3 0.82 turbine housing on stock displacement.
+1, great to see its making progress. Might as well swap in a new turbo to help with spool a touch.

UkuRiSh
09-16-2011, 12:16 PM
I would suggest trying the T3 0.82 turbine housing on stock displacement.

i'm happy whit my turbo , im not even finish my tune yet remeber that .

99ebpsi24
09-16-2011, 02:59 PM
I don't understand why people are so bent on lag. I mean I could see if it didn't make full boost until 6k and ran till 7500rpms. But that clearly isn't the case here. Idk about you guys but if I'm racing someone I sure as hell don't start down anything under 4500-5k rpms so that way I'm in the power band. As long as you aren't retarded and the power band is long enough that you don't fall out of it once you shift you'll be fine. Sorry if that seemed dick but I just don't understand why lag is such a big deal. It's like giving your competition a little time to think they have a shot until you spool up and walk their ass IMO lol.

Back on topic. Congrats on getting it back on the road, I'm sure you're enjoying it. Keep at the tune and it'll come around just fine and hopefully will make the power you're shooting for.

bigern45
09-16-2011, 04:30 PM
^ i dont think everyones bent on lag mike, i just think ones with experience are saying that there are more efficient setups for his car, that is all. i see your point as well, but if a guy is going all out on a super rare setup like this, i think they are just suggesting some more efficient setups that will produce more power sooner and longer.

congrats on getting it back up and running.

Don Supreme
09-16-2011, 05:28 PM
I don't understand why people are so bent on lag. I mean I could see if it didn't make full boost until 6k and ran till 7500rpms. But that clearly isn't the case here. Idk about you guys but if I'm racing someone I sure as hell don't start down anything under 4500-5k rpms so that way I'm in the power band. As long as you aren't retarded and the power band is long enough that you don't fall out of it once you shift you'll be fine. Sorry if that seemed dick but I just don't understand why lag is such a big deal. It's like giving your competition a little time to think they have a shot until you spool up and walk their ass IMO lol.

Back on topic. Congrats on getting it back on the road, I'm sure you're enjoying it. Keep at the tune and it'll come around just fine and hopefully will make the power you're shooting for.

Keep one thing in mind...... This car will probably need to respool on some of the low gear shifts..... Which will hurt his overall 1/4... especially if he doesn't bang the shift right at red line.

Evilevo
09-16-2011, 08:43 PM
I don't understand why people are so bent on lag. I mean I could see if it didn't make full boost until 6k and ran till 7500rpms. But that clearly isn't the case here. Idk about you guys but if I'm racing someone I sure as hell don't start down anything under 4500-5k rpms so that way I'm in the power band. As long as you aren't retarded and the power band is long enough that you don't fall out of it once you shift you'll be fine. Sorry if that seemed dick but I just don't understand why lag is such a big deal. It's like giving your competition a little time to think they have a shot until you spool up and walk their ass IMO lol.

Back on topic. Congrats on getting it back on the road, I'm sure you're enjoying it. Keep at the tune and it'll come around just fine and hopefully will make the power you're shooting for.

Because he can make the same power up top, yet have better spool and better TQ EVERYWHERE in the powerband.

I have pretty much the laggiest twin turbo setup and I make a TON more TQ than him. At 4000RPM, he makes ~200wtq. I made ~360wtq.

UkuRiSh
09-16-2011, 08:53 PM
Because he can make the same power up top, yet have better spool and better TQ EVERYWHERE in the powerband.

I have pretty much the laggiest twin turbo setup and I make a TON more TQ than him. At 4000RPM, he makes ~200wtq. I made ~360wtq.

Wherever i'm happy with the car .

Evilevo
09-16-2011, 08:59 PM
Wherever i'm happy with the car .

That is what it is all about, but we are just trying to help you get your car performing even better than it is now.

Hyphy
09-16-2011, 09:01 PM
To each is his own bro...if you like the setup than that's all that matters. [up]

UkuRiSh
09-16-2011, 09:04 PM
i would love to do some friendly pull with 770 S4 40-140 20-23 psi 93 oct no meth , just see what she can to do :)

Evilevo
09-16-2011, 09:05 PM
i would love to do some friendly pull with 770 car 40-140 20-23 psi 93 oct no meth , just see what she can to do :)

Come to H2Oi, but I can already tell you what will happen, lol.

Hyphy
09-16-2011, 09:07 PM
What will happen? :P

Evilevo
09-16-2011, 09:07 PM
What will happen? :P

You tell me. 425whp vs 600whp. LOL

UkuRiSh
09-16-2011, 09:09 PM
You tell me. 425whp vs 600whp. LOL

20-23 psi ? you have 600 whp ?

Evilevo
09-16-2011, 09:11 PM
20-23 psi ? you have 600 whp ?

I don't have a boost file that low, LOL. 29psi was 602awhp and my lowest boost is 24psi and that was 560whp.

Hyphy
09-16-2011, 09:13 PM
LOL

UkuRiSh
09-16-2011, 09:19 PM
I don't have a boost file that low, LOL. 29psi was 602awhp and my lowest boost is 24psi and that was 560whp.

Ok i'm very interesting how far you can jump :)

UkuRiSh
09-16-2011, 09:20 PM
The bad news i'm not go in to H2O this year :(

Evilevo
09-16-2011, 09:20 PM
Ok i'm very interesting how far you can jump :)

Are you coming to H2Oi? We are supposed to be having a B5 S4 meet.

Evilevo
09-16-2011, 09:21 PM
The bad news i'm not go in to H2O this year :(

Well that answers that, lol.

GURUMAN
09-16-2011, 09:29 PM
Wherever i'm happy with the car .
Good.

Just saying from the bag of experience I have, by the way your powerband looks, dont listen a tuner that believes that adding critical high almost unsafe timing plus water meth, he would bump that powerband dramatictly to the left.

Graph will look the same but higher on the chart with more boost.

Does your cam timing work ?


If you like it like this and you think it drives fine, leave it the way it is.


But in case you want more in lower 4k, you will need to swap it out (turbine)

Keep up good work !

Evilevo
09-16-2011, 09:31 PM
Good.

Just saying from the bag of experience I have, by the way your powerband looks, dont make a tuner believe that adding critical high almost usafe timing will bump that powerband dramatictly.

If you like it like this and you think it drives fine, leave it the way it is.


But in case you want more in lower 4k, you will need to swap it out (turbine)

Keep up good work !

Exactly, just speaking from experience and prior knowledge that tuning isn't really going to help with spool THAT much. A smaller T3 turbine would be ideal.

The whole point of a 6262 or 6265 is incredible spool while still retaining a ton of topend.

TweetsS4Estate
09-17-2011, 09:20 AM
You're a nice guy Dom, and I agree with this statement.


Good.

Just saying from the bag of experience I have, by the way your powerband looks, dont listen a tuner that believes that adding critical high almost unsafe timing plus water meth, he would bump that powerband dramatictly to the left.

Graph will look the same but higher on the chart with more boost.

Does your cam timing work ?


If you like it like this and you think it drives fine, leave it the way it is.


But in case you want more in lower 4k, you will need to swap it out (turbine)

Keep up good work !

MLJS4
09-20-2011, 11:17 PM
Come to H2Oi, but I can already tell you what will happen, lol.
ill put $300 on the single turbo car runing 29psi

Don Supreme
09-21-2011, 05:24 AM
ill put $300 on the single turbo car runing 29psi

Too bad he isn't running 29 psi.

UkuRiSh
09-24-2011, 05:46 PM
Just did some Log's for my Tuner and take it my camera :) 25-28 psi


http://youtu.be/t3pzzHNiNq0

AudiSportB5S4
09-25-2011, 06:14 PM
Car is moving really well man!! Looks like fun..

Eurotechnik
09-26-2011, 07:22 PM
Oleg, it was nice meeting you today and a pleasant surprise to see you pull up at my dealer. This car is a beast and pulls like a freight train!! (knowing that the tune still needs to be worked out a bit) Sounds ungodly under boost as well.. The 6265 was a great choice and the custom work was top-notch; this car was well-round/ put together. I appreciate the ride and time out of your day brotha. Would love to see this car line up with a 770 or GT car soon..

AudiA4_20T
09-26-2011, 07:25 PM
Whose your tuner?

UkuRiSh
09-26-2011, 07:46 PM
Oleg, it was nice meeting you today and a pleasant surprise to see you pull up at my dealer. This car is a beast and pulls like a freight train!! (knowing that the tune still needs to be worked out a bit) Sounds ungodly under boost as well.. The 6265 was a great choice and the custom work was top-notch; this car was well-round/ put together. I appreciate the ride and time out of your day brotha. Would love to see this car line up with a 770 or GT car soon..


Let's wait for a bit for 29 psi whit good tune :) see you soon.

UkuRiSh
09-26-2011, 07:57 PM
Whose your tuner?

Big Thank's to Chris from EURODYNE , also i was trying to contact whit Kevin Black but he just ignored me i don't know why ! i know he is good . So i'm looking for some one who know's maestro 7 soft and know's what his doing and i wonna tune car on the street . So far car runnig great on 19-22 psi but on high boost 25-28 doesn't feel strong enough .

q_dubz
09-26-2011, 08:36 PM
Big Thank's to Chris from EURODYNE , also i was trying to contact whit Kevin Black but he just ignored me i don't know why ! i know he is good . So i'm looking for some one who know's maestro 7 soft and know's what his doing and i wonna tune car on the street . So far car runnig great on 19-22 psi but on high boost 25-28 doesn't feel strong enough .realize how busy Kevin is....give him time. Also dont be shy to send follow up emails, sometimes the old man forgets :)

UkuRiSh
09-27-2011, 08:06 PM
Car is moving really well man!! Looks like fun..

Thanks man . How is H2O guys are you enjoyed ?

UkuRiSh
09-30-2011, 04:49 PM
It's hot , very hot :)

http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1010.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1012.jpg

*Blue-Angel*
09-30-2011, 05:15 PM
Hahah put a camera in their to see what happens when ur full throttle through 5th and 6th gear.

2.7t steve
09-30-2011, 08:36 PM
Too bad he isn't running 29 psi.
Very soon!! :-)

Evilevo
09-30-2011, 08:51 PM
Very soon!! :-)

Your original post was better.

Too bad he has built a ton of single turbo cars and knows what he is talking about. We are trying to give him advice on how get more tq and a more useable power band.

Highhats
10-12-2011, 05:11 PM
Got a ride today in Olegs car at 20psi. This thing is fast guys! Felt like my evo on a pump gas tune(hi top end quickness but no real stomach torque). he must have been making about 420whp today. My evo had a precision 6262 with a small 4 cyl backing. It was much laggier and a harder throw due to the later hit of power. This car felt extremely NA. Almost supercharged due to the displacement. Oleg is looking for a tuner to makes his car spit blood. Any takers? 6265 + tuner equals = game over! PS he has meth setup also but not running. Just plain ridiculous. Car has potential of big power. Should make 500whp plus on pump. Might just need to run 2 bar but whatever works.[headbang]

Spooled1.8
10-12-2011, 05:26 PM
Why don't you take it to someone like EPL or even jfonz?

Evilevo
10-12-2011, 06:12 PM
Take it to EPL!

Vinchenzo51
10-12-2011, 06:32 PM
Take it to EPL!

http://t3.gstatic.com/images?q=tbn:ANd9GcQRsZOvNvIOHP8xfDdFqniCPelYajmEh jUpMITdaPwd--OdnyTDu3YSj-Ow

http://www.audizine.com/forum/member.php/77278-Sales-EPL

UkuRiSh
10-12-2011, 07:58 PM
Why don't you take it to someone like EPL or even jfonz?


I have alredy Soft on my ECU Moestro 7 i dont wonna pay over again man , i need just guy who can work on my tapp file a bit .

Spooled1.8
10-13-2011, 09:42 AM
1. Sell all of your eurodyne stuff to recoup some cash.
2. Purchase new tune.
3. Create a monster.

Just my opinion, good luck!

UkuRiSh
10-13-2011, 01:03 PM
I can't belive this but i have to sell my S4 i spend ton of money and time on this car , i need the money sorry guys .

stage3s4
10-13-2011, 01:23 PM
how much you gonna be asking for the car?

Don Supreme
10-13-2011, 01:32 PM
This happens so often when we reach for the stars...

Its sad but true.

UkuRiSh
10-13-2011, 01:36 PM
how much you gonna be asking for the car?


20k

stage3s4
10-13-2011, 01:36 PM
it does, its seems like most of the people build their cars and after wanna sell them.

UkuRiSh
10-13-2011, 01:43 PM
Yea people do that becose they can't stop spending the money , I was think to upgrade my car to rs4 widebody and rs4 interior that's why ,

Hyphy
10-13-2011, 09:17 PM
Sucks you have to sell...wish you well [up]

UkuRiSh
10-15-2011, 03:23 PM
Run my car today with meth 50/50 mix on 27 psi perfect AFR 12.1 fells a bit stronger , sound to me like my ev14 750 cc injectors is max out .

spinall4
10-16-2011, 01:51 PM
Mike at Innovative Tuning here in Buffalo ny dyno tunes EURODYNE MAESTRO 7!!!!

http://www.innovativetuning.com/

Don Supreme
10-16-2011, 03:06 PM
Run my car today with meth 50/50 mix on 27 psi perfect AFR 12.1 fells a bit stronger , sound to me like my ev14 750 cc injectors is max out .
Logs?

UkuRiSh
10-16-2011, 03:07 PM
Mike at Innovative Tuning here in Buffalo ny dyno tunes EURODYNE MAESTRO 7!!!!

http://www.innovativetuning.com/

Thanks Man ,

UkuRiSh
10-16-2011, 03:08 PM
Logs?


I dint do it yet , tomorrow i will .

UkuRiSh
10-21-2011, 08:13 PM
More video guys this run is 29 psi with meth 50/50 mix .



http://www.youtube.com/Ggq8jqCUaBM&feature

Don Supreme
10-21-2011, 09:04 PM
looks pretty fast now man!

UkuRiSh
10-21-2011, 09:15 PM
looks pretty fast now man!

Yep ,, she is much faster this is the time to have some race's ;)

Hyphy
10-22-2011, 12:34 AM
She looks like she's moving now!:)

UkuRiSh
10-22-2011, 09:08 PM
She looks like she's moving now!:)

unforchantly

tomorrow i'm goin to do dyno again :)

UkuRiSh
10-22-2011, 09:16 PM
I need to buy light weight rims , my rims is 19" and they fucking weight is 25.5 pound just a rim , i was think about the Enkei RPF1 18"

Evilevo
10-22-2011, 10:09 PM
I need to buy light weight rims , my rims is 19" and they fucking weight is 25.5 pound just a rim , i was think about the Enkei RPF1 18"

17x8 RPF1

UkuRiSh
10-22-2011, 10:15 PM
17x8 RPF1

Yea this one is good but I have 365 mm rotor I think min fit is 18" still 18 pound vs 25.5 it's a big different .

UkuRiSh
10-23-2011, 12:10 PM
OK dyned my car some think was wrong today power bend jump up and down but its better result 520-575 whp 27-29 psi with meth 50/50 mix

stage3s4
10-23-2011, 12:22 PM
dynojet its known to be a happy dyno.

AudiSportB5S4
10-23-2011, 12:35 PM
Nice man! I would have come up but I'm super busy today.. I helped that Blue RS6 car put down those kinda numbers [:)]

UkuRiSh
10-23-2011, 12:41 PM
Nice man! I would have come up but I'm super busy today.. I helped that Blue RS6 car put down those kinda numbers [:)]

Thanks man , i dint see the rs6 s4 run but I think he put down 518 whp it's very nice car .

034Motorsport
10-25-2011, 09:40 AM
Figure out whats going on?

Car looks like it spools pretty damn quick out on the highway!

I'd also consider Kosei K1-TS; super cheap, real light, but not the sexiest.

UkuRiSh
10-25-2011, 07:56 PM
Figure out whats going on?

Car looks like it spools pretty damn quick out on the highway!

I'd also consider Kosei K1-TS; super cheap, real light, but not the sexiest.


Need tune and second pump .

Evilevo
10-25-2011, 08:44 PM
Need tune and second pump .

EPL.......

Run a second 044 inline like I do.

UkuRiSh
10-25-2011, 10:29 PM
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1053.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1054.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1061.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1059.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1057.jpg

sfored
10-25-2011, 11:17 PM
I was just having this conversation w/ my tuner/builder ...
what happens if the first pump takes a $hit ?

EPL.......

Run a second 044 inline like I do.

jibberjive
10-25-2011, 11:33 PM
I was just having this conversation w/ my tuner/builder ...
what happens if the first pump takes a $hit ?Run a fuel pressure gauge with a relay trigger that sets an alarm if fuel pressure gets below a certain point.

sfored
10-26-2011, 12:12 AM
I am running them parallel and as a fail safe he was going to put in a hop (sp?) switch which would do the same... if the pressure ever dropped to my base pressure ..
I already had a 044 fail on me...

Run a fuel pressure gauge with a relay trigger that sets an alarm if fuel pressure gets below a certain point.

jibberjive
10-26-2011, 01:34 AM
Then why are you asking the question? ha

sfored
10-26-2011, 02:16 AM
wanna know what people are running ... many of the P cars are running in line and I wanted to know why I/we weren'r on my car and he said the P cars is mostly due to space issues .. and since i have a fuel cell tht has 2 feeds he said my setup made more sense ... just getting input..

Then why are you asking the question? ha

UkuRiSh
10-26-2011, 08:31 AM
I think i found the problem , exhaust leak before wastegate v bend clemp is lose :) that's why she run on top end like shit could be this ? i'm gonna do smoke test .

UkuRiSh
10-26-2011, 05:37 PM
Logs?

Sorry it's take little longer :) 26 psi with meth .

https://docs.google.com/spreadsheet/ccc?key=0ApfEfX7fFzBbdHpUU2Y3ZGZQbXp2M0J4NlE1YlFPN 3c

UkuRiSh
10-26-2011, 08:59 PM
dynojet its known to be a happy dyno.

I got Dyned my car before on MUSTANG DYNO 430whp with 19psi no meth and you telling me i don't make this power !

stage3s4
10-26-2011, 11:13 PM
you should dyno the car on the same mustang dyno to see improvement with new tune. Every dyno reads a little different , especially dynojet is know to read high.

Don Supreme
10-27-2011, 05:34 AM
I am running them parallel and as a fail safe he was going to put in a hop (sp?) switch which would do the same... if the pressure ever dropped to my base pressure ..
I already had a 044 fail on me...

Hobbs switch (just fyi so others can search on it)

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-BCS-003&Category_Code=BCS

UkuRiSh
10-27-2011, 08:43 AM
you should dyno the car on the same mustang dyno to see improvement with new tune. Every dyno reads a little different , especially dynojet is know to read high.

One memeber brought a Mustang dyno sheet and His sheet off by 2whp

stage3s4
10-27-2011, 10:16 AM
I wouldn't go by that but that's only my opinion. Go back to the same mustang dyno and see what happens.

UkuRiSh
10-27-2011, 11:31 AM
I wouldn't go by that but that's only my opinion. Go back to the same mustang dyno and see what happens.

PAY for my dyno and i would go :)

GURUMAN
10-27-2011, 06:13 PM
You car is for sale ?

http://cgi.ebay.com/ebaymotors/?cmd=ViewItem&_trksid=p3984.m1555.l2649&item=180746068086&sspagename=STRK%3AMESELX%3AIT#ht_1057wt_1167

UkuRiSh
10-27-2011, 06:37 PM
You car is for sale ?

http://cgi.ebay.com/ebaymotors/?cmd=ViewItem&_trksid=p3984.m1555.l2649&item=180746068086&sspagename=STRK%3AMESELX%3AIT#ht_1057wt_1167

Yes man it is .

UkuRiSh
10-28-2011, 09:22 AM
http://i831.photobucket.com/albums/zz234/UkuRiSh/IMG_1051.jpg

aaron1085
11-02-2011, 04:29 PM
I';ve been following this on ebay....whats reserve set at? atleast give me a ball park. PM if you like.

Highhats
11-03-2011, 05:20 PM
She will be mine OH YES! She will be MINE!

sfored
11-03-2011, 09:23 PM
gone ? sold ? reserve not met ?

Highhats
11-03-2011, 09:34 PM
about to be lol

udcc11
02-04-2012, 05:45 AM
Did you end up selling this car? If not whats going on with it.

UkuRiSh
02-04-2012, 06:59 AM
Did you end up selling this car? If not whats going on with it.

My SPEC Stage 3+ clutch is tosted so i just installed new one , other fuel pump 044 in line and 85mm maf housing with hitachi sensor and fix some litlle things . When i take the manifold out i finded some cracks on it , i welded and add high temp flex pipe and i make it stronger turbo brackets , very soon goin to run 29 psi my base file and dyned we will see diferent , after dyno J-Fonz Will Tune my car . Looking to get over 600whp we will see . So this kinde Story man i just goot my new cutch little over 600 mil on it i need put 200 mil more on my clutch and then i can tryed high boost.

p.s

Car Is Still For Sale

UkuRiSh
02-12-2012, 06:55 PM
New Tune by J-Fonz 25 psi no meth car fells good , some video when we test the last file guess what 911 turbo :)



http://www.youtube.com/YuOtlnwb3fk


Second Run But Posche give up .


http://www.youtube.com/8E4qySmdw5Q

nothingbutwin
04-24-2012, 08:08 PM
did you have this dynod after the new tune?

DESPOT D S4
04-24-2012, 09:43 PM
Car Is Still For Sale

very nice,how much?

UkuRiSh
04-25-2012, 04:38 AM
did you have this dynod after the new tune?

Yes i did dyno J-Fonz spools 200 rpm later then EuroDyno and make more power on top

UkuRiSh
04-25-2012, 04:39 AM
very nice,how much?

around 20k after i finish some work on my car .

Don Supreme
04-25-2012, 05:41 AM
Yes i did dyno J-Fonz spools 200 rpm later then EuroDyno and make more power on top

Later or earlier?

UkuRiSh
04-25-2012, 08:21 AM
Later or earlier?

Yes 200-300 rpm Later but top end power is better on J-Fonz, we stop tune the car at 24 psi it's made 450whp i think on mustang dyno just 93oct no meth , next time we will tune on dyno 29-30 psi i hope to see some better numbers .

Evilevo
04-25-2012, 09:07 AM
Yes 200-300 rpm Later but top end power is better on J-Fonz, we stop tune the car at 24 psi it's made 450whp i think on mustang dyno just 93oct no meth , next time we will tune on dyno 29-30 psi i hope to see some better numbers .

Can you post the dyno sheet? I would love to see what your powerband looks like.

naudlee
04-25-2012, 10:34 AM
Can you post the dyno sheet? I would love to see what your powerband looks like.

also interested... any explanation in the spool differences?

UkuRiSh
04-25-2012, 01:04 PM
Can you post the dyno sheet? I would love to see what your powerband looks like.

I will post some time two different ECU dyno sheet .


also interested... any explanation in the spool differences?

probably tune .

naudlee
04-25-2012, 01:45 PM
im just curious what in the tune caused the lag...

prior tune was on stand-alone correct? or am I thinking of the wrong single turbo'd car

UkuRiSh
04-25-2012, 01:55 PM
im just curious what in the tune caused the lag...

prior tune was on stand-alone correct? or am I thinking of the wrong single turbo'd car

No, I have two stock S4 ECU with different Tune Euridyne and J-Fonz i never run stand-alone

Monty23
05-22-2012, 08:04 AM
Did you ever get tuned at 29-30psi? Are you still happy with your tune from jfonz?

UkuRiSh
05-22-2012, 10:49 AM
Did you ever get tuned at 29-30psi? Are you still happy with your tune from jfonz?

I can't say anything , because my car is a part for some modification so I will post result some time , I almost done .

Monty23
05-22-2012, 11:00 AM
Sounds good, I'm excited for updates here.... Has your car ever had any overheating issues during summertime heat while sitting in traffic with the 2 - 7 inch ebay fans? Are you still running the stock mechanical fan on your accessory belt?

UkuRiSh
05-22-2012, 12:46 PM
Sounds good, I'm excited for updates here.... Has your car ever had any overheating issues during summertime heat while sitting in traffic with the 2 - 7 inch ebay fans? Are you still running the stock mechanical fan on your accessory belt?


I have no Problem with over heat I'm use stock fan and two little fan for AC radiator

I'm planning to buy hood with wents it will help cooled down engine bay little .

UkuRiSh
05-23-2012, 07:59 PM
Some pictures i did today .

My log manifold cracks betwen tee conection and i decide use 034@Max style thanks for sharing Max and parts . Also i almost finish my manifold ,

http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1324.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1356.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1355.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1348-Copy-1.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1347-Copy-1.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1346-Copy-1.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1360.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1376.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1380.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1389.jpg
http://i831.photobucket.com/albums/zz234/UkuRiSh/MANIFOLD/IMG_1394.jpg

Monty23
05-24-2012, 06:02 AM
That mani is beautiful!!! Thanks again for the fan info - I am definitely going that direction... I would love to see how your old welded log manifold spooled vs. the 2.8 cast manifolds... When will your car be running?

UkuRiSh
05-24-2012, 06:11 AM
That mani is beautiful!!! Thanks again for the fan info - I am definitely going that direction... I would love to see how your old welded log manifold spooled vs. the 2.8 cast manifolds... When will your car be running?

Thanks man , hopefully by end of the week and big thanks to Edge Motors .

SpeedWorksAuto
05-24-2012, 09:07 PM
Very nice!

I have been considering using the 2.8 exhaust manifolds too. My manifolds have cracked a couple of times.

UkuRiSh
05-30-2012, 07:24 PM
First start today finally :)


http://www.youtube.com/sS6qHmiNe5Q

DiscoPotato
05-31-2012, 11:09 AM
That manifold looks awesome I saw it down at edge when it just had the stacks on. It came out great!

UkuRiSh
05-31-2012, 11:23 AM
That manifold looks awesome I saw it down at edge when it just had the plenums on. It came out great!


Thanks man , the time call to Josh :)

UkuRiSh
06-04-2012, 08:37 AM
http://www.youtube.com/Dzv7lMxwX_k

18T_BT
06-04-2012, 02:36 PM
If the video wasn't so bright, we'd get a better 'feel' for the speed...glad to see it running

Monty23
06-04-2012, 03:00 PM
What is your exhaust setup?

UkuRiSh
06-04-2012, 07:00 PM
If the video wasn't so bright, we'd get a better 'feel' for the speed...glad to see it running

Yep man 40$ camera is sux :) next time i will take my HD one


What is your exhaust setup?

3" downpipe and 3" catback with two vibrant maflers

Monty23
06-04-2012, 07:06 PM
Damn, I was hoping my car wouldn't get insanely loud. Was it just the camera making it sound louder than it is in your cabin or can you not have a conversation in your car?

UkuRiSh
06-05-2012, 07:02 PM
Damn, I was hoping my car wouldn't get insanely loud. Was it just the camera making it sound louder than it is in your cabin or can you not have a conversation in your car?

Yes the camera making sound louder in cabin little , but still my exhaust is to loud .

Audi_S4
06-06-2012, 07:03 AM
You using flatshift ?

Looks very nice! You don't by any chance have a VBOX or another GPS based measuring tool ?

btw I notice you don't revv it past 7k, why [:D] I'd revv the shit out of that bitch with such a big snail and all that engine work

UkuRiSh
06-06-2012, 07:29 AM
You using flatshift ?

Looks very nice! You don't by any chance have a VBOX or another GPS based measuring tool ?

btw I notice you don't revv it past 7k, why [:D] I'd revv the shit out of that bitch with such a big snail and all that engine work


sorry i don't have it VBOX

Yes it's flatshift work just amazing with big turbo no lag after shifts :)

i revv over 7300 rpm on 3rd and 4 th gear and 6800-6500 on 5th and 6th in first run it's to scary man especially when i have stock breaks and bad tires :)

Audi_S4
06-06-2012, 07:57 AM
sorry i don't have it VBOX

Yes it's flatshift work just amazing with big turbo no lag after shifts :)

i revv over 7300 rpm on 3rd and 4 th gear and 6800-6500 on 5th and 6th in first run it's to scary man especially when i have stock breaks and bad tires :)

Ok I understand now :-)

I'd love to see it do a 2nd to 4th pull revving all the way but do that when you get a BBK installed and with a pair of new tyres ;-)

Sick build man, everythings looks great ! I bet it's a blast to drive !

UkuRiSh
06-14-2012, 11:08 PM
little fun on highway



http://www.youtube.com/npu8xX4223Y

JEENYUS
06-19-2012, 02:20 PM
that's a cute straw.

Monty23
06-27-2012, 08:46 PM
What are the dimensions of your fmic, I want to try and run 3.5" thick verticle core and am wondering if it will fit behind my bumper..

UkuRiSh
06-27-2012, 09:50 PM
What are the dimensions of your fmic, I want to try and run 3.5" thick verticle core and am wondering if it will fit behind my bumper..


I'm not shure i think this is my intercooler Precision Length - 31.5 in Height - 10 5/8 in. Width - 3.5 in. Inlet & Outlet - 2 3/4 in For 750 hp over 1000 CFM works very well on my car and you will need modified bumper suport

AudiSportB5S4
06-28-2012, 06:01 AM
The last video is really hard to watch with the audio, lol.

Love the sound of the engine up top, sounds great. Then sounds like wind.

S4M3
06-28-2012, 06:23 AM
I love you setup bro. Josh told me all about it. I really think you should go with 3'5 in exhaust or 4 in.

UkuRiSh
07-07-2012, 09:38 AM
I love you setup bro. Josh told me all about it. I really think you should go with 3'5 in exhaust or 4 in.

Thanks man , Why i need new exhaust because of the back presser ? i sent my turbo two weeks ago to Precision this ******s still didn't do shit looks like i'm not gonna make it in to waterfest i'm so mad man , looks like my turbo was bad almost from the beginning but i have my back up Audi S4 2011

When i take my turbo a part i discovered this , turbine wheel is damaged and under turbine wheel platform is bend in 1/8" plus i had little play shaft :( go in to upgrade to CEA 6266



http://i831.photobucket.com/albums/zz234/UkuRiSh/2.jpg

Monty23
07-07-2012, 05:33 PM
That's horrible! I hope precision takes care of you... were you running a journal bearing or ball bearing?

Edit: your first page says ball bearing.

UkuRiSh
07-07-2012, 06:50 PM
Ball bearing

lidoautogroup
07-07-2012, 08:30 PM
Man that sucks! I know what it is like to be in your shoes right now. Good luck and I hope you get it running soon.

UkuRiSh
07-08-2012, 06:38 PM
Man that sucks! I know what it is like to be in your shoes right now. Good luck and I hope you get it running soon.

Yea it is sucks , every time come up some thing new , but the good think is i will have it NEW CEA 6266 should spools faster and better power i hope :)

Audi_S4
07-09-2012, 05:30 AM
Yea it is sucks , every time come up some thing new , but the good think is i will have it NEW CEA 6266 should spools faster and better power i hope :)

Nice! In the EVO and Honda scene poeple have pushed these over 700whp with E85 and they really get going around 5k rpm on a stroked 2.3L EVO

Very curious to see the behaviour of these turbo's on your car! Are you planning on running some more boost this time?

What A/R did you take .64 or .82 ?

UkuRiSh
07-09-2012, 06:10 PM
Nice! In the EVO and Honda scene poeple have pushed these over 700whp with E85 and they really get going around 5k rpm on a stroked 2.3L EVO

Very curious to see the behaviour of these turbo's on your car! Are you planning on running some more boost this time?

What A/R did you take .64 or .82 ?


i Just got call from precision they say nothing wrong with my turbo accept little play shaft so any way I'm doing upgrade to 66mm and same housing T4 .81
planning run over 30 psi .

034Motorsport
07-10-2012, 10:32 AM
Thanks man , Why i need new exhaust because of the back presser ? i sent my turbo two weeks ago to Precision this ******s still didn't do shit looks like i'm not gonna make it in to waterfest i'm so mad man , looks like my turbo was bad almost from the beginning but i have my back up Audi S4 2011

When i take my turbo a part i discovered this , turbine wheel is damaged and under turbine wheel platform is bend in 1/8" plus i had little play shaft :( go in to upgrade to CEA 6266



http://i831.photobucket.com/albums/zz234/UkuRiSh/2.jpg

Looks like something hit your turbine, like a piece of carbon.

Definitely interested to see what the 66mm does on this motor. I'm a believer that these motors like their exhaust wheels and turbine housings as small as possible.

How many miles have you put on the setup so far?

PS. A B8 S4 as the backup vehicle, darn.... =)

UkuRiSh
07-10-2012, 02:25 PM
Looks like something hit your turbine, like a piece of carbon.

Definitely interested to see what the 66mm does on this motor. I'm a believer that these motors like their exhaust wheels and turbine housings as small as possible.

How many miles have you put on the setup so far?

PS. A B8 S4 as the backup vehicle, darn.... =)

Put down 12k in one year . My new turbo is in the way should have it by this Friday :) i hope i don't need to tune my car , Josh did amazing work on my car even with bad turbo he did 430hp on 16 psi i pick up other 20-30 hp just with intake .

Audi_S4
07-12-2012, 02:11 PM
Put down 12k in one year . My new turbo is in the way should have it by this Friday :) i hope i don't need to tune my car , Josh did amazing work on my car even with bad turbo he did 430hp on 16 psi i pick up other 20-30 hp just with intake .

Probably a good thing to get it tweaked for the newer turbo cause it will spool faster and maybe even run better up top with the newer technology behind the PT6266