PDA

View Full Version : helppppp!



eurodevil
03-02-2011, 04:04 PM
I have a 2000 audi a4, The motor and transmission mounts were both so wore out that the whole engine/transmission shifted out of wack so the car will not shift, so I put new motor and transmission mounts in and still the car will not shift. I was told the linkage in the transmission is off thats why it won't shift. Anyone know how to check the linkage/fix the problem? thanks for any help!

CrtchRktRcr
03-02-2011, 04:14 PM
think about it.. if the shifter is in ONE position and the transmission moved underneath it nothing will be aligned. You need to get in there and see if you bent any shift rods etc.. Hope the internals aren't grenaded from it.

eurodevil
03-02-2011, 04:19 PM
it goes in to reverse and drive no problem. it will drive down the road it just won't switch gears...

CrtchRktRcr
03-02-2011, 04:22 PM
oh sounds like a selenoid is bad.. or a vacuum line came off.

eurodevil
03-02-2011, 04:22 PM
okay thank you.