Anyone have VMR V01's ? and pics

[groundround]

Really like these wheels just wondering if anyone has these and pics of them on your car, I love the concave look to these wheels? with dimensions would be great to.

Thanks

[mr shickadance]

http://www.velocitymotoring.com/links/view/Car_Model/A4/

that link should take you to the vmr gallery, from the left you can refine the search to only show the v701 there is at least one b7 rocking them there.....they look great go for it

[groundround]

http://www.velocitymotoring.com/links/view/Car_Model/A4/

that link should take you to the vmr gallery, from the left you can refine the search to only show the v701 there is at least one b7 rocking them there.....they look great go for it

Thanks,

So if I have ET of 32 on my stock TI wheels. If I wanted more concave look to the V01's I could go with a lower ET of say 25 or so with a 8mm spacer? 19x8.5 or 18x8.5

[mr shickadance]

yes

[fly300kts]

Here is a side shot of my 701, no spacers

http://gi147.photobucket.com/groups/r311/QIAQF2J3T3/IMG_7107Large.jpg

Phil

[groundround]

Here is a side shot of my 701, no spacers

http://gi147.photobucket.com/groups/r311/QIAQF2J3T3/IMG_7107Large.jpg

Phil

Nice that's pretty flush that's 8.5 with ET 35 ?

[beantown]

Here's mine, w/o low...

http://i963.photobucket.com/albums/ae111/beantown2010/RightSide1.jpg

[groundround]

Here's mine, w/o low...

http://i963.photobucket.com/albums/ae111/beantown2010/RightSide1.jpg

Dimensions on them please?

[mr shickadance]

Here is a side shot of my 701, no spacers

http://gi147.photobucket.com/groups/r311/QIAQF2J3T3/IMG_7107Large.jpg

Phil


oh here is another picture of my beautiful b7


sorry....just jealous is all

[fly300kts]

Nice that's pretty flush that's 8.5 with ET 35 ?

Yes correct

phil

[fly300kts]

oh here is another picture of my beautiful b7


sorry....just jealous is all

LMAO, you can have it, it's only question of $$
Thank you for the compliment

Found 1 more from the rear
http://i31.photobucket.com/albums/c395/fly300kts/DTM%20rear/IMG_5763Large.jpg

phil

[mr shickadance]

if you dont mind me drooling, where did you get those oval tips?

[fly300kts]

LMAO, you can have it, it's only question of $$
Thank you for the compliment

Found 1 more from the rear
http://i31.photobucket.com/albums/c395/fly300kts/DTM%20rear/IMG_5763Large.jpg

phil

I had them Custom made locally

Phil

[mr shickadance]

blast.....your whole car is custom made sir....

[fly300kts]

blast.....your whole car is custom made sir....

No all but some. Problem is that all this custom stuff cost arms, legs, kidneys, and I will stop here (I punch my keyboard with my tongue)

Phil

[audidave]

Phil, you running 235's all around?

[fly300kts]

Phil, you running 235's all around?

Now yes, better for the Quattro

phil

[fly300kts]

Found a recent one

http://i31.photobucket.com/albums/c395/fly300kts/IMG_0174.jpg

phil

[VMRWheels]

Phil, great shots!

As far as concavity/specs, we would recommend the 18/19x8.5 ET35, with no spacers required. The concavity of most of our wheels is determined by width, rather than offset, so all 8.5" V701 faces will have the same depth of concavity.

V701 look great on the B7 and tend to be a little more exclusive than some of our other wheels. A personal favorite of mine [up]

[beantown]

I had them Custom made locally

Phil

Very nice my man [up]...I hadn't seen pics since you updated the rear setup.

[arce909]

Nice wheels!