View Full Version : B7 LOWER control arms same as B6???!
4Ring
02-03-2011, 06:29 PM
Is this true? I need to a replace my front lower rear control arm and im pretty sure B6 is the same size fitment.
B7Daily
02-03-2011, 06:29 PM
yes
4Ring
02-03-2011, 06:32 PM
awesome. found a used B6 one for 1/3 of the price of a new one from ecs.
;thumbup
4Ring
02-10-2011, 08:54 PM
Anybody know where I can find OEM lower control arms, besides ECS?
Dangler
02-10-2011, 09:05 PM
http://www.purems.com/index.php
search ebay
http://www.blauparts.com/proddetail.asp?prod=M1A1107-01-A
or you can buy used ones as long as you know the part #'s from audi dismantlers like shokan
B72.0tsline
02-10-2011, 09:29 PM
wait what? why you need to replace your front control arm? did you hit something?
mr_esmit
02-11-2011, 07:09 AM
fcpgroton has an ebay store also. I bought stuff from them when I had my B6.
airbornerifleman
10-23-2012, 06:45 PM
If I get a complete front upper and lower control arm kit for a b6 will it fit my b7?
http://forums.audiworld.com/showthread.php?t=2765833
jrtrainor
10-23-2012, 06:52 PM
I had to replace mine as well. Bushings went out.
Sent from my iPhone 5 using butt plug powers
airbornerifleman
10-24-2012, 11:25 AM
I just bought all 8 front control arms, 2 tie rod ends and 2 front sway bar links, all OEM made by Lemforder for $950 shipped.
Stealer wanted over $2000.
konarider94
10-24-2012, 12:40 PM
cant you just replace the bushings?
http://www.ecstuning.com/Audi-B7_A4-Quattro-2.0T/Suspension/Control_Arm/Lower/ES264208/
J.Owen
10-24-2012, 12:45 PM
I just bought all 8 front control arms, 2 tie rod ends and 2 front sway bar links, all OEM made by Lemforder for $950 shipped.
Stealer wanted over $2000.
Wow, You could have gotten all 13 pieces with S4 uppers and inner and outer S4 tie rods for $239 shipped.
http://www.audizine.com/forum/showthread.php/336019-Official-FCP-Groton-Control-Arm-Kit
airbornerifleman
10-24-2012, 02:26 PM
^That's pretty cheep... I found so many kits but none were made by Lemforder or TRW. What I got is identical to what you would get from Audi. If I had to go aftermarket, I would go 034 or Febi Bilstein.
thenofjboy
10-24-2012, 04:20 PM
^ is Febi really Bilststein? I read about Febi & Meyle years ago but please jog my memory
jrtrainor
10-24-2012, 08:02 PM
cant you just replace the bushings?
http://www.ecstuning.com/Audi-B7_A4-Quattro-2.0T/Suspension/Control_Arm/Lower/ES264208/
I can't remember why but no I couldn't.
Sent from my iPhone 5 using butt plug powers
airbornerifleman
10-25-2012, 05:02 AM
^ is Febi really Bilststein? I read about Febi & Meyle years ago but please jog my memory
I do not think they are the same company.
J.Owen
10-25-2012, 06:58 AM
I still have some of the boxes sitting around from my FCP kit. I'll take a peek and see who the manufacturer was. I can say that I have had the full kit on for about 40k so far with quite a few track days and everything is holding up fine. Plus they have a lifetime warranty.