AR braking: rebuilt big brake kits by adam's rotors

[adam's rotors]

AR BRAKING CUSTOM BIG BRAKE REBUILD KITS

rotor rings & hardware kits for Brembo, Rotora, and StopTech BBK hats only.
reuse your aluminum hats that came with your original 2-piece discs and remount them to these brand new, custom AR machined rings with fresh hardware!

http://i339.photobucket.com/albums/n455/remembertofocus/APW_0379.jpg (http://www.adamsrotors.com/BBK)

SAVE MONEY...YOUR ROTOR HATS ARE REUSABLE. PLUS, GET CUSTOM OPTIONS ON YOUR BBK THAT NOONE ELSE IN THE WORLD HAS!!!

http://i339.photobucket.com/albums/n455/remembertofocus/DSCF0078wtmk.jpg (http://www.adamsrotors.com/BBK)

we also offer a full line of performance pad options while you’re at it and all our rings (like all AR orders) are zinc dipped for corrosion prevention.

pricing is all inclusive per corner/ring including-


rotor ring w/your pick of pattern
silver zinc dip
new hardware
shipping to your door within the US

choose from one of the following patterns-


dimpled
slotted
dimpled/slotted
dimple/dimple/slot
AR exclusive: speed, our multi-slot
AR exclusive: sport I’s, an over-dimple
AR exclusive: sport II’s, an over-slot
AR exclusive: race, our unique double slot
AR exclusive: track, double slot/dimple
AR exclusive: drag I's, a single slot/cross-hatch
AR exclusive: drag II's, a double slot/cross hatch
AR exclusive: drift I's, a triple curve
AR exclusive: drift II's, a triple curve/slot

we offer the following sizes for Brembo, StopTech, & Rotora hats ONLY-


282mm
328mm
332mm
345mm
355mm
380mm

black & gold zinc is available too for +$50 per axle, and CA residents must pay sales tax.

AR braking division products are special request and fully made-to-order at ~3-4 weeks

[Anthony]

Big things in 2011. I dig! [up]

[BB7-08]

yet another big 2011 release...

rebuild your worn 2-piece rotors with AR rotors rings for a custom BBK!

http://i339.photobucket.com/albums/n455/remembertofocus/APW_0379.jpg

rotor rings & hardware kits for Brembo and STOPTECH BBK retrofits.
reuse your machined hats that came with your original discs and remount it to these brand new custom AR machined rings with fresh hardware!
save money...your rotor hubs are perfectly fine. plus, get custom options on your BBK that NOONE else in the world has!!!
we also offer a full line of performance pads to select from while you’re at it and all our rings (like all AR orders) are zinc dipped for corrosion protection.
black & gold zinc available too for +$50

choose from:
-dimple
-slotted
-dimpled/slotted
-dimple/dimple/slot
-AR race
-AR track
-AR sport I’s
-AR sport II’s

email us for pricing...

http://i339.photobucket.com/albums/n455/remembertofocus/APW_0312.jpg
[shown are a pair of 355mm rings for a 6-pot gran turismo front kit in AR race w/silver zinc]

also check out our new 2011 pattern releases!!!

AR sport I's
http://i339.photobucket.com/albums/n455/remembertofocus/APW_0221.jpg
[our over-dimple, which must be ordered with painted hubs]

AR sport II's
http://i339.photobucket.com/albums/n455/remembertofocus/APW_0251.jpg
[our over-slot, which must be ordered with painted hubs]


I dig the AR sport I's

Any $ for B8's ?

[adam's rotors]

the car model is irrelevant...these are BBK ring & hardware kits for rebuilds as the post reads...
you reuse your aftermarket 2 piece hat and depending on the set-up you have (size wise) we make that ring.

if this is your first time seeing us, check out our website or our 4th running thread linked in my signature to see what our core business is all about.

[adam's rotors]

official pricing has been added to the OP

[adam's rotors]

just took order for a 355x32mm front set-up in AR track...pics to come

[kwksilver]

nevermind

[adam's rotors]

^ [up]

[adam's rotors]

check it out!

http://www.adamsrotors.com/bbk

[adam's rotors]

now serving Rotora BBK owners as well!

[adam's rotors]

how about some dimples with your Brembos?
http://i339.photobucket.com/albums/n455/remembertofocus/ARbraking1.jpg
http://i339.photobucket.com/albums/n455/remembertofocus/photo2-12.jpg

[L0U]

as previous poster was confused about. It be nice to upgrade brakes without buy9ng a bbk....like we need hats to bolt up your rings to run pads/lines with. making the 345mm stockers much better. 345 is a bbk for many.

[adam's rotors]

you find the hat maker & i'll supply the rings & hardware!

[adam's rotors]

installed:
http://i339.photobucket.com/albums/n455/remembertofocus/photo1-14.jpg
http://i339.photobucket.com/albums/n455/remembertofocus/photo-21.jpg
http://i339.photobucket.com/albums/n455/remembertofocus/photo2-14.jpg

[adam's rotors]

swamped...2-piece rebuilds are taking off!!!
let us know about your worn BBK and we can customize your kit like noone els

[adam's rotors]

AR merch...spread the love and rep adam's rotors everywhere!

AR hoody color way #1: red/white/black

AR's first clothing production and we're jumping right in with cut & sew.
true craftsmanship w/old school flare. expect nothing less from us...fully made to order, just like our rotors
http://i339.photobucket.com/albums/n455/remembertofocus/DSCF0787.jpg

AR hoody color way #2: white/red/black

hand made, real deal 3 layer chenille patch work, hand stitched to a heather grey zip-up american apparel hooded sweatshirt in XS-XL.
...like nothing else out there
http://i339.photobucket.com/albums/n455/remembertofocus/DSCF0800.jpg

$50 shipped!
email us to order...

[mike's machine]

how long does the order takes?
ready to be shipped?
i need a set for my ST soon.

do you also sell pads for stoptech BBK?
i don't see one on the website [:(]

[adam's rotors]

just like our rotors, we're fully made to order...but our BBK's & rebuild kits take 3-4 weeks upon payment.

...and yes we do, email me.

[b5audi21]

I need that.

[adam's rotors]

AR braking 2-piece rebuild kit: AR sport I w/black zinc & fresh hardware-
http://i339.photobucket.com/albums/n455/remembertofocus/DSCF0078wtmk.jpg

[adam's rotors]

we've been rebuilding alot of big brake kit's lately...
get yours dialed in for this summer's track runs!!!

[phukwatyaherd]

I'm doing a homebrew DIY BBK with 17Z Brembo calipers off a Cayenne. Do you make a 330x32mm 2 Piece Rotor for use on a B5 S4 with these calipers? If so how much for a slotted pair shipped to 19018? Also, do you know if the 332x32 Stoptech replacement rotors you likely make are compatible with 17Z's?

[adam's rotors]

visit the new AR braking page: www.adamsrotors.com/BBK

[adam's rotors]

hump bump