DTM Front Lip A4/S4

[AWDTURBO]

So as i come close to getting everything in my garage and ready for paint i need to buy this lip. Have you guys went OEM or aftermarket. If aftermarket where did you get it from. I am looking to get mine from the dealership at $552 .. anyone have any input?

[ataylor]

$552 for a front lip?

[garymonnecka]

It's carbon fiber.

[Kyokio]

ebay has it for half the price.. but i'd stick with oem.

http://cgi.ebay.com/ebaymotors/2006-2008-Audi-A4-Carbon-Fiber-DTM-Front-Lip-Splitter-_W0QQcmdZViewItemQQhashZitem4cf43a29c7QQitemZ33051 4966983QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[mo17k3y85]

that's disgustingly expensive, ask and you shall receive

http://www.bodykits.net/front-lips/audi/a4/

http://www.namotorsports.net/detail.cfm/part_cd/KE3037001KER

don't know if these are what your looking for

[ataylor]

that's disgustingly expensive, ask and you shall receive

http://www.bodykits.net/front-lips/audi/a4/

http://www.namotorsports.net/detail.cfm/part_cd/KE3037001KER

don't know if these are what your looking for

second link is for a B6

first link looks promising. They have the DTM (CF) one for $200 cheaper. Of course it's not OEM
http://www.bodykits.net/images/bodykits_net/160756/00.jpg

and I might go after that non-sline one, below it. Looks ABT'ish.
http://www.bodykits.net/images/bodykits_net/160757/00.jpg

[GarrettReid]

it's just a simple piece of carbon fiber. I can't imagine fitment being an issue with aftermarket copies, though, I could be wrong.

I'm going DTM too, in the future so this thread shall prove to be useful later.

[ataylor]

i need to buy one and take it to the racing-boat shop near my place in Maine.. my buddy made a fortune making molds and dup'ing rare vw pzwo MK3 parts, a-b-c pillars, headliners, etc.

These, and the DTM rear lips would be a pretty easy piece to pump out

[beantown]

Unless you can confirm an aftermarket copy has similar quality and fitment, just go OEM. That's what I did.

Ultimately it guarantees that you won't have any hassles as you might with a different product.

Here's a photo of mine [:D]:

http://www.audizine.com/forum/attachment.php?attachmentid=13017

[CleverA4Name]

I went with the OEM Carbon Fiber lip on my DTM as well. I had no fitment issues. Also, keep an eye out in the classifieds and elsewhere because you can usually find one for cheaper than $550.

Don't get an aftermarket and DO NOT paint it....

[fly300kts]

Went OEM as well

Phil

[ataylor]

wait, fogs? is that DIY?

[fly300kts]

wait, fogs? is that DIY?

C'mon Man, wake up [:D]

I did post the DIY long time ago

http://www.audizine.com/forum/showthread.php/334286-DIY-Fog-Lights-with-DTM-Bumper?highlight=dtm+fogs

http://gi147.photobucket.com/groups/r311/QIAQF2J3T3/IMG_7099Large.jpg

Phil

[delta]

What kind of foglights are those? I still have my old fogs from non s-line bumper, will these work for the DIY fogs into DTM?

[fly300kts]

What kind of foglights are those? I still have my old fogs from non s-line bumper, will these work for the DIY fogs into DTM?

Yes they will, I used my OEM ones for the mod

Phil

[bartles]

phil your car is just too damn sexy!

[beantown]

Yes they will, I used my OEM ones for the mod

Phil

Yup, used my original fogs as well.

[fly300kts]

phil your car is just too damn sexy!

Than you Man

phil

[noiser]

Sorry being off-topic, but I went through long way to upgrade my 2005 B6 cab to B7 (including re-wiring to B7s central electronics unit) and have a question - If you have DTM from, as I have, have no fogs in the front, how does your coming/leaving home work at front? I have it working in the back, but no light in the front - think that fogs should light up - but DTM doesn't have it. Thanks a lot!

[mpv314]

When I get my DTM bumper, I'm definitely going aftermarket with the Carbon Creations one. I can't justify getting an OEM lip if its sole realistic purpose is to look like carbon fiber (check, that one does) and get scraped up (check, that one will too).

[fly300kts]

I case anyone is looking for a lip, PM me, I have a spare one for cheap. She is pretty beat up as far as finish but assume can be redone

Phil

[aluthman]

I case anyone is looking for a lip, PM me, I have a spare one for cheap. She is pretty beat up as far as finish but assume can be redone

Phil

^fill, sand, and paint black. Done.

[fly300kts]

^fill, sand, and paint black. Done.

That might be a solution if someone is looking for one

Phil

[italia8287]

That might be a solution if someone is looking for one

Phil

how much?

[fly300kts]

Got an offer at $120 + shipping + PP fees

Phil

[CVTwhatadumidea]

Thanks Phil!

[fly300kts]

Thanks Phil!

Welcome Sir

Phil