View Full Version : podi - Sneak peek of the new fittings I just finished designing

12-23-2010, 03:29 PM
It has taken me a while to get these designs done but here is a sneak peek at the fittings I am having made since such solutions do not currently exist.

For those of you that have been waiting a while for these to be made to complete your oil pressure and oil temperature gauge installation I will have a special offer for you that I don't think you can refuse.


12-23-2010, 03:46 PM
Call me a noob, but where does the banjo bolt hook into? I know this is an oil pressure sender solution, just a bit confused.

Oh yeah, you have one sold already right here. And thanks for the Black Friday sale.

12-23-2010, 03:49 PM
The banjo bolt replaces the existing banjo bolt at the oil feed line to the turbo, however, I do have other ideas in mind for locations but I need to test them out and make sure it works 100% before disclosing those details.

BTW the fittings are designed to be used for all oil pressure and oil temperature sensors that come with Podi gauges.

12-23-2010, 03:53 PM
So this is more of a solution for coolant temp? What about oil pressure? I see the sender in the pic, so that got me confused.

12-23-2010, 03:58 PM
These fittings are for the oil pressure and temperature gauge installations.

Instead of Frankensteining something together similar to what I have in my car I designed some fittings that can do it in one step. Replace the images of the temperature fitting with the pressure fitting for the first two images and you have your solution.

These banjo fittings are also parts of a larger solution I have designed which am going to test and release at a later date.

12-23-2010, 04:27 PM
Gotcha. You have one sold here, when you are ready to market them.

I was initially planning on the 42DD relocation kit (oil pressure), but remember a thread before where you stated you were looking into making your own solution. So I tried to PM you maybe last week or so to inquire about this, but your PM box was full (got kind of lazy on following up with another attempt). My plan was to hold out till I actually was planning on installing the gauge to order the relocation kit, just in case you came up with a solution. And looks like you did.