View Full Version : Door panel removal

12-09-2010, 02:46 PM
I am removing the door panel to try to temp fix my window so it won tfall down until i get new clips but there is a white piece of plastic like in this pic that is blocking the rear of the door frame. http://www.brrman.com/audi/2000_Avant/Door%20Without%20Panel.jpg
how do i take this plastic piece out?

12-09-2010, 09:39 PM
If I recall correctly you can remove the black plastic pins and finnagle it out somehow. I did it that way once, but it turns out to be way harder than just pulling the 4 torx bolts holding the window frame in. I couldn't even get the plastic pins out without breaking them... If you do decide to pull the frame, mark the shim on the front/bottom bolt as well as around the washers under the bolts. That way you can just line everything up and bolt it back in, instead of checking and realigning multiple times.