PDA

View Full Version : Central lock pump interchange



kmongru
10-01-2010, 03:00 PM
So the propeller in my central lock pump went, and it seems there are many fixes ,

Does anyone know what models of pump are interchangeable? Or which ones i can use parts off of?? Its a 99 A4 2.8 quat

Thanks !!

99blueb5
10-01-2010, 03:06 PM
should be able to use parts from any b5 a4, i think its b6 they went to electric style door locks, ive used a couple circut boards from a 97 and one from a 00 in my 98

kmongru
10-01-2010, 03:23 PM
What about passat??? Is there anywhere i can just buy the propeller? Or something

99blueb5
10-01-2010, 03:25 PM
pretty sure most of the passats used electric systems, i highly doubt you could buy individual parts, best bet is to find the part you need at a junk yard

kmongru
10-01-2010, 03:25 PM
What about jetta too?

kmongru
10-01-2010, 03:27 PM
Yea ive been checking junk yards but am having a hard time finding audi's and wana know what else would work

99blueb5
10-01-2010, 03:37 PM
that is most likely going to be your only option, check the classifieds, they wont go for cheap though, new they are around 500

kmongru
10-01-2010, 03:42 PM
Yea im in canada and new its 900$

yasky777
10-02-2010, 01:14 PM
I found one on this board for 75$ I put it in myself and it works fine.

Truebeliver
10-02-2010, 07:43 PM
You can use the older passat vac pumps with a little work.

kmongru
10-03-2010, 08:51 AM
Thanks for the help i guess i just gotta keep looking

Mjan1992
10-03-2010, 12:10 PM
yea im in the same boat as you, but mine got wet so i guess i gotta find the water source first

jthabiso36
09-13-2012, 10:42 PM
I have a b5 96 with original central lock pump.I facelifted the car and got the new pump from a facelifted b5 including the remote (with close and open- like a vw key),however i connected the new pump and does not work with the key,i changed the door sensor and still the same.I noticed with the wiring there is 2 wires left from the new pump that i cannot connect anywhere (by color code).How i can i make the new pump to work.