PDA

View Full Version : OEM B8 S4 19" 5 tri-spoke wheels on a C6



illusive45
10-01-2010, 03:42 PM
Has anyone tried fitting these on a C6 yet? If so, any pics you can post are appreciated! I know there are replicas out there but I haven't seen any that are 19x9. I would like that extra width to fit 255s or 265s tires.

I believe the offset is ET43 and they are 19x9? TIA!

Skyler@Achtuning
10-01-2010, 05:13 PM
Hartmanns are 19x8.5" ET38, the OEM S4 wheels are 8.5" ET43, the Hartmanns will sit 5mm further out.

Here's the Hartmanns on a C6 A6 with 255-35-19s

http://gallery.hartmannwheels.com/download/17619-4/Audi_C6_A6_Hartmann_204_19_MF.jpg

whehd79
10-03-2010, 09:52 PM
My A6 c6 has the rims on now but I do not know how to post pics here..
You need hub rings to fit them on your c6.

whehd79
10-03-2010, 10:11 PM
My A6 c6 has the rims on now but I do not know how to post pics here..
You need hub rings to fit them on your c6.

hope you can see the picture. Sry for the crappy pics but you would be able to get an idea of the wheels on A6 C6.
http://cyimg32.cyworld.com/common/file_down.asp?redirect=%2F320002%2F2010%2F10%2F4%2 F44%2F20101004001916%5F44841662%2Ejpg

illusive45
10-04-2010, 12:17 PM
hope you can see the picture. Sry for the crappy pics but you would be able to get an idea of the wheels on A6 C6.
http://cyimg32.cyworld.com/common/file_down.asp?redirect=%2F320002%2F2010%2F10%2F4%2 F44%2F20101004001916%5F44841662%2Ejpg

Can't see it. Theres a little picture icon you can just cut and paste the URL when you create a post. Try that.

whehd79
10-04-2010, 09:43 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs008.ash2/33776_1631007661281_1419325480_31601647_7159940_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs732.snc4/65229_1631007381274_1419325480_31601646_492082_n.j pg

That's what I did.. Can you see it now?
They are OEM S4 rims, 19x8.5(not sure, might be 19x9) et43 with 19/35/255 tires.
Hope you can see the pics and get some idea for the rims on your car.
Any question, let me know.

Hambone101
10-04-2010, 09:58 PM
^^Wheels lood good!!! A lot more flush than I imagined, well done sir.

whehd79
10-04-2010, 10:04 PM
^^Wheels lood good!!! A lot more flush than I imagined, well done sir.
Thanks. Just wanted to make a good OEM look.
Now I assume that Illusive45 can see the pictures :D

illusive45
10-04-2010, 11:37 PM
Thanks. Just wanted to make a good OEM look.
Now I assume that Illusive45 can see the pictures :D

Yup I can see them now. Wish they were a little bigger, but thanks anyways!!! Your car looks sweet!

whehd79
10-05-2010, 09:01 AM
Thanks.
For me, they are big enough to run since I am in New York. If I go bigger rims with lower porfile tires, it's going to be a hassle here. Also Being with 19" and 255/19/35 tires sometimes rub (well, mostly not) in the rear with 2 people in the back since I lowered the car.

blulytes
10-05-2010, 08:22 PM
looks hot!

ThirdStrike
10-06-2010, 12:45 AM
It looks boringly stock.. but not ugly.

whehd79
10-06-2010, 01:58 PM
It looks boringly stock.. but not ugly.
Thanks, yeah. That's exactly what I tried.
This is 2005 A6 C6 3.2 non sline, which had absolutely bored look. So I hooked it up to stock S6 look with borla quad muffler, H&R sport springs, S6 DRL LEDs, S6 bumper, S6 Grille, S6 Door Blades, RS6 Wheels, S6 Rear valence, etc. My goal, at least, is succeded since it's not ugly though :D

staticuxo
10-07-2010, 12:47 PM
car looks great! OEM+

illusive45
10-07-2010, 02:11 PM
Thanks, yeah. That's exactly what I tried.
This is 2005 A6 C6 3.2 non sline, which had absolutely bored look. So I hooked it up to stock S6 look with borla quad muffler, H&R sport springs, S6 DRL LEDs, S6 bumper, S6 Grille, S6 Door Blades, RS6 Wheels, S6 Rear valence, etc. My goal, at least, is succeded since it's not ugly though :D

Do you have spacers with the stock B8 S4 wheels or no? No clearance issues or rubbing at all?

whehd79
10-07-2010, 09:07 PM
Do you have spacers with the stock B8 S4 wheels or no? No clearance issues or rubbing at all?

no spacers. I do not have issues at all for clearance. However, they've rubbed only once in the rear with two people in the back with lots of stuff in the truck. Except that, I've had no experience of rubbing so far. IMO you also can put spacers with no issue.

MainlandMig
11-11-2010, 06:37 PM
Car / wheels look great.. wish u had some bigger pics to share. if u ever get some.. please add them

twinsnailsS4
11-11-2010, 11:30 PM
no spacers. I do not have issues at all for clearance. However, they've rubbed only once in the rear with two people in the back with lots of stuff in the truck. Except that, I've had no experience of rubbing so far. IMO you also can put spacers with no issue.

What about the use of a hubcentric ring? I thought the newer models such as the B8s had a larger hub diameter than the old 57.1?

hakim0409
11-12-2010, 09:08 AM
Thanks, yeah. That's exactly what I tried.
This is 2005 A6 C6 3.2 non sline, which had absolutely bored look. So I hooked it up to stock S6 look with borla quad muffler, H&R sport springs, S6 DRL LEDs, S6 bumper, S6 Grille, S6 Door Blades, RS6 Wheels, S6 Rear valence, etc. My goal, at least, is succeded since it's not ugly though :D

so the s6 bumper fit fine to the non sline fenders? no other mods need it ?
thanks

whehd79
11-15-2010, 09:05 PM
What about the use of a hubcentric ring? I thought the newer models such as the B8s had a larger hub diameter than the old 57.1?


yes I have hub rings. They are metal ones.

whehd79
11-15-2010, 09:06 PM
Car / wheels look great.. wish u had some bigger pics to share. if u ever get some.. please add them


No bigger pics yet.
I've never thought of people get interested in my car look. lol
I will try to take some later.
Thanks.

whehd79
11-16-2010, 12:43 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs563.ash2/148589_1699626656713_1419325480_31731232_3230535_n .jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1183.snc4/150544_1699624456658_1419325480_31731230_1219026_n .jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs992.snc4/76542_1699626776716_1419325480_31731233_8082093_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs970.snc4/76326_1699626896719_1419325480_31731234_2066015_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs965.snc4/75823_1699630776816_1419325480_31731237_7957360_n. jpg

I took some pics last night in the garage.
Sorry for dark images and they are not much bigger than previous ones but they are kind of better quality than before.
Thanks.

MainlandMig
11-16-2010, 09:10 PM
u take nice pics... imagine if u had a pro camera.. ha. anyway like u say.. pics arent bigger but they are better quality... the 1st and last pic was helpful. im trying to see how the set up sits... see how the offset is ... these are 1 of 3 styles im looking for next wheels. my car being silver also makes the pics that much better

MainlandMig
11-16-2010, 09:31 PM
I believe the offset is ET43 and they are 19x9? TIA!


They are OEM S4 rims, 19x8.5(not sure, might be 19x9) et43 with 19/35/255 tires.

They Should be 8.5 wide
http://forums.audiworld.com/picture.php?albumid=162613&pictureid=227510

whehd79
11-16-2010, 10:11 PM
u take nice pics... imagine if u had a pro camera.. ha. anyway like u say.. pics arent bigger but they are better quality... the 1st and last pic was helpful. im trying to see how the set up sits... see how the offset is ... these are 1 of 3 styles im looking for next wheels. my car being silver also makes the pics that much better
Wow, glad to hear the pictures are helpful.

whehd79
11-18-2010, 02:57 PM
so the s6 bumper fit fine to the non sline fenders? no other mods need it ?
thanks
no mod at all