PDA

View Full Version : Coolant question...



Armenian
08-18-2010, 05:40 PM
Hi, so i replaced my old thermostat with a new one and during the process the old coolant just drained all out.
I was wondering if anyone knows how to do a proper flush or like what type of techniques are used to wash out the lines before filling it up with new coolant
Also,
I have 3 leters of G12 coolant, i was wondering do i mix this with 50% distilled water and 50% of this g12 coolant or how does that go?

Thanks for any help

Racerx220
08-18-2010, 05:44 PM
here you go man http://www.audizine.com/forum/showthread.php/190397-DIY-B5-A4-Flush-Your-Coolant.

Armenian
08-18-2010, 06:02 PM
Thanks a LOT! thats probably what i was looking for, i will try to do this process tomorrow, i knew there was a way to do it before filling up new coolant

Thanks

chitownsports
08-18-2010, 06:11 PM
I just followed that diy yesterday, and it worked perfect (I found out that I had brown coolant so I had to do a complete flush, and everything is pink now!!)

Armenian
08-18-2010, 06:38 PM
so did you end up using the whole 1 Gallon of G12 coolant and you had to mix that with 1 Gallon of Distilled water?

2001A4QUATTRO
08-19-2010, 06:00 AM
Get another container. Mix the G12 50/50 with distilled water and then fill