PDA

View Full Version : t3/t4 guys



grillhands
07-21-2010, 11:01 AM
What boost are you guys running at? Also, what is the comparison between a t3/t4 to a gt2871? Mine is a 46 trim with a .63 ar. I've searched and i couldn't find anything. I've been running mine at 12psi because i dont want to mess anything up but i've seen guys on youtube running 22psi[o_o] Any advice would be great.

Lazer Viking
07-21-2010, 11:29 AM
stock rods ?

i am conservitaly running mine at 15psi with stock rods, thats what i feel safe at

grillhands
07-21-2010, 12:20 PM
stock rods ?

i am conservitaly running mine at 15psi with stock rods, thats what i feel safe at
Is yours the 50 trim? Yeah, the rods are stock.

T0mat3
07-21-2010, 02:59 PM
LOL it says 50 trim under his MSG. What chip are you running Grill?

grillhands
07-21-2010, 03:18 PM
LOL it says 50 trim under his MSG. What chip are you running Grill?

LOL.. i didn't even notice it. I'm using eurodyne 630cc mafless.

lowandslow4now
07-21-2010, 03:54 PM
I am running a 57 trim on 18lbs with stock rods. I am at the limit of my setup due to software and injector duty cycle. I am at 90% duty cycle I really dont want to go any higher than this.

grillhands
07-21-2010, 04:34 PM
I am running a 57 trim on 18lbs with stock rods. I am at the limit of my setup due to software and injector duty cycle. I am at 90% duty cycle I really dont want to go any higher than this.

What size injectors are you using? A 57 trim pretty nice, what's it rated for 450 crank?

T0mat3
07-21-2010, 04:36 PM
LOL.. i didn't even notice it. I'm using eurodyne 630cc mafless.

LMFAO Im not any better..... it says in your sig too LOL

lowandslow4now
07-21-2010, 04:41 PM
What size injectors are you using? A 57 trim pretty nice, what's it rated for 450 crank?

Yeah I think it is rated at 450-500 CHP per 034 website I am running the Unitronic 440 file with delphi 440 injectors. I wanted to go with Eurodyne software but I had too good of a deal to pass up on the ecu.

T0mat3
07-21-2010, 04:47 PM
Ill need to figure out which one to go for, I live in between of both main offices (CTAPP and Uni) hmmmm lol 50 trim kit is coming in next week :)

lowandslow4now
07-21-2010, 04:58 PM
Its pretty simple to decide. What year is your car?

T0mat3
07-21-2010, 06:03 PM
97 So AEB

lowandslow4now
07-21-2010, 06:10 PM
I would go with eurodyne. The reason I say this is that Unitronic does not make a file larger than the 440 file for the AEB. I have the UNI file and it is running good but there is not much room to expand.

Seerlah
07-21-2010, 06:15 PM
You guys should really be carefull with that amount of boost. I remember there was a member on here who blew his engine like a year and a half ago. He was a regular too, but moved onto something different after he blew a rod through his block. I think he was running the 50 trim.

grillhands
07-21-2010, 06:54 PM
I found some flow rates from looking up vender websites and other forums. I don't know if this will help but it cant hurt either.
GT2860rs 62trim 35lb/min
t3/t4e 45trim 350hp capable
t3/t04e 57trim 50lb/min
t3/t04e 50trim 46lb/min
GT3071r 56trim 46lb/min
My old GT2X 31lb/min
I believe my t3/t4 is 41lb/min