PDA

View Full Version : My Engine Build Pictures for your enjoyment



beejohn
06-08-2010, 02:25 PM
She is under the knife:
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs595.snc3/31356_875837248004_3306619_48686540_3171294_n.jpg

check out the block:
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs595.snc3/31356_875837252994_3306619_48686541_1559677_n.jpg

Wires and shit are everywhere, I hope she will run again:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837257984_3306619_48686542_4887184_n.jpg

another picture of the block disassembled:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837277944_3306619_48686543_908919_n.jpg

Old pistons & rods, all of them seemed to be intact. But who puts old shit back into their new engine? Not me!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837292914_3306619_48686544_7964795_n.jpg

JE Pistons, 8.5:1 compression ratio
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs595.snc3/31356_875837317864_3306619_48686545_2991310_n.jpg

Integrated Engineering Rods, now i can handle mucho boosto
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837332834_3306619_48686546_1672144_n.jpg

another pic of IE rods, this time you can see the engraving of Integrated Engineering on them, oooooooooo
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837342814_3306619_48686548_7087483_n.jpg

Pic of the head, not too shabby for 120k on the clock. Thank you M1 0w40 every 5k miles:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837357784_3306619_48686551_6962478_n.jpg

Big man moving small engine to the machine shop to be bored out. New bore will be 81.5mm, slightly larger than stock. Should bring the displacement to 1804cc:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs535.ash1/31356_875837372754_3306619_48686553_2554665_n.jpg

Castor Troy
06-08-2010, 02:30 PM
http no worky

Seerlah
06-08-2010, 04:25 PM
Not to be that guy, but why didn't you go the 2.0 route? Either way, digging the work. What turbo you plan on running?

beejohn
06-08-2010, 04:41 PM
still running gtrs eliminator/atp manifold...

i wanted to keep the build cheap, i'm over putting money into this car.. i know the difference would've been a couple hundred bucks or less, but didn't want to spring for the extra tuning.

CrtchRktRcr
06-08-2010, 04:47 PM
that's exciting. you should spray bomb the bay while you're at it.