PDA

View Full Version : ko4 bolt removal. question. plz help doing it right now



stack
06-04-2010, 08:59 AM
the bottom bolt the connects the cat to the turbo is stupid
how am i suppose to break it loose,
there is no rooom
i want to put on my ko4 today!!!
i got the 2 on the top. but the bottom -_-

akaEsCo01
06-04-2010, 09:11 AM
3" extension, with a swivel socket on a stubby 3/8 ratchet or a flex head ratchet gets it done for me.

AforOuttie
06-04-2010, 11:05 AM
3" extension, with a swivel socket on a stubby 3/8 ratchet or a flex head ratchet gets it done for me.

^^ x2 Gotta get creative with your tools. I had to use a Ujoint (swivel socket) with a looong extension and some sort of penetrating stuff to break the bolts loose.

stack
06-04-2010, 11:24 AM
yea i did it thx
but now the freakin 2 bolts on the bottom that are blind...i thhink it oil i am not sure
how do i get that off??????

geeky
06-04-2010, 11:57 AM
I think I used a REALLY long allen and vice grips to hold the allen/break them loose.

edit: here's a good DIY for the install

http://www.audiworld.com/tech/eng27b.shtml

stack
06-04-2010, 12:04 PM
from underneath??
or from on top

geeky
06-04-2010, 12:06 PM
I remove the stock turbo bracket, the oil return line and the coolant return line from under neath the car.

b5v6
06-05-2010, 03:36 PM
it was very easy with two extensions and u-joint coming through the passenger side wheel well.