PDA

View Full Version : Starter solenoid wiring help please!



Dmax15
06-03-2010, 07:15 PM
I'm finishing up swapping motors and I need some help with the correct wiring for the starter solenoid. Its been a month since I took the original motor out and I'm not positive on which wires went where. Are they on the correct studs in the picture or do they need to be swapped around? The bottom wire has a 90* bend on it.
http://i721.photobucket.com/albums/ww213/sdhelpenstell/Audistarter.jpg

Dmax15
06-04-2010, 07:35 PM
So I've got it hooked up so that the top wire is going to the pos. battery terminal and the bottom one runs to the alternator, basically the opposite of what is pictured above. Does this sound right to anybody?

pro_allstar69
07-02-2010, 11:07 AM
any answers anyone? im stuck on this too.

NeedingAnAudi
07-26-2010, 05:24 PM
Bump, need to know this also

terraflata
07-26-2010, 06:35 PM
What year is your car, or rather what engine. What I am seeing is a wire connected with a nut (The Ground I assume), and another wire with a connector (Harness connector to Terminal 50), but I am checking for a 97 I will cross check on ETKA for a 2000.

FasterA4ThanUrs
07-26-2010, 06:38 PM
The bigger wire gets grounded, the little one with the slip on clip goes to the 50 post like you have it in the pic, and.the pos batt cable goes on the left post if I remember correctly.