Quick Vag-Com Mods Question

[Korrect414]

I just got my vag-com and was doing a few of the little mods and did the module 46 ones together to disable auto luck,remote windows, and 1 click unlock.

I followed the instructions here:

NOTE - All Module 46 recodes can be combined and done together. e.g. To do all 3 above, recode to [existing value + 64 - 4 + 32]

But for some reason all of the features work except for the remote windows one. I thought maybe my key fob was running low on juice and was causing an interruption and not letting the windows to roll up or down, but swapped to my other new key fob and still nothing going on. It's not the end of the world, just a little annoying. Anyone else have this problem. I saved my default and can always go back to that and just do the remote window one on it's own. It's just a little weird how it's not working.

[fly300kts]

REMOTE WINDOWS + 1 CLICK LOCKS

Click on the [46-Central Conv.] button.
Change the Software Coding number to "11896" and click [Do It!] button to recode this module. If you want to enable remote windows without enabling 1 click locks use "11884". If you want to revert back to the original coding use "11820".


Phil

[Korrect414]

Thanks Phil, Im going to go try this out right now.

[fly300kts]

OK let me know

phil

[Korrect414]

Thanks a bunch Phil. Just did it and it's all working perfectly. I should've bought a Vag-Com a while ago. I love tinkering with little things like that.

[fly300kts]

Thanks a bunch Phil. Just did it and it's all working perfectly. I should've bought a Vag-Com a while ago. I love tinkering with little things like that.

Your welcome. Be careful, Vag com is great but can be dangerous as well

Phil

[Korrect414]

Your welcome. Be careful, Vag com is great but can be dangerous as well

Phil

Yeah, thanks for the heads up. I make sure to save all of my defaults before I recode anything. I'm pretty much done with the little tinkering since I have done the seat belt chime delete, and the Euro DRL one. I basically just wanted it to scan for codes and to code my new Bt kit.


I asked this in the telematics forum but I also pulled a few codes relating to my RNS E. I assume they have been there since my retrofit. I haven't had any problems and everything works fine. I also just coded the NAV to get my directions show up on my DIS. They are still not showing up, I was thinking it had something to do with my Dension GW 100 Ipod adapter. I did the whole module 17 adaptation 10, channel 62 and then added 4 to my current value for nav.

Address 37: Navigation Labels: 8E0-035-192-RNSE.lbl

Part No SW: 8E0 035 192 Q HW: 8E0 035 192 Q

Component: RNS-E US3 H73 X-**

Revision: 02S Serial number: AUZBZ7G1102720

Coding: 0311115

Shop #: WSC 24929 133 80777



2 Faults Found:

00858 - Connection; Radio ZF Output to Antenna Amplifier

011 - Open Circuit - Intermittent

Freeze Frame:

Fault Status: 00101011

Fault Priority: 5

Fault Frequency: 1

Reset counter: 64

Time Indication: 0

Date: 2010.02.04

Time: 16:05:35



Freeze Frame:

Mileage: 655350 km

Count: 2405

Clock: 17:41



01044 - Control Module Incorrectly Coded

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 7

Fault Frequency: 1

Reset counter: 153

Time Indication: 0

Date: 2010.02.04

Time: 16:59:13

Address 56: Radio Labels: 8E0-035-192-RNSE.lbl

Part No SW: 8E0 035 192 Q HW: 8E0 035 192 Q

Component: RNS-E US3 H73 X-**

Revision: 02S Serial number: AUZBZ7G1102720

Coding: 0311115

Shop #: WSC 24929 133 80777



2 Faults Found:

00858 - Connection; Radio ZF Output to Antenna Amplifier

011 - Open Circuit - Intermittent

Freeze Frame:

Fault Status: 00101011

Fault Priority: 5

Fault Frequency: 1

Reset counter: 64

Time Indication: 0

Date: 2010.02.04

Time: 16:05:35



Freeze Frame:

Mileage: 655350 km

Count: 2405

Clock: 17:41



01044 - Control Module Incorrectly Coded

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 7

Fault Frequency: 1

Reset counter: 153

Time Indication: 0

Date: 2010.02.04

Time: 16:59:13