PDA

View Full Version : Images of Sparco 330mm Mugello installed..



Silvant
02-05-2005, 08:24 PM
very comfortable for how small it is.. the touch is
nice, everything matches now. should do well in the canyons.. too bad its supposed to rain tomorrow..
http://www.audizine.com/gallery/data/500/289croppedpit2.JPG
http://www.audizine.com/gallery/data/500/289cockpit1.JPG

Rieger_RS4
02-05-2005, 08:48 PM
nice.....I might do the same afer I get some race seats. But all my stuff right now is MOMO (pedals, shift knob, e-brake)........

EC Motorwerks
02-05-2005, 09:28 PM
silvant Do you have a link to the list of perf. mods you have done?

Silvant
02-05-2005, 09:54 PM
no link, i'll do it the hard way:
---
APR Stg3
APR fmic
3inch turboback/Borla xr-1
Sachs race clutch / GMG 12lb fly
k&n

Eibach ProKit c/o's
GMG 22mm rear sway
NS lower tie-bar support **FORSALE** $150

S4 rotors / PorscheBoxter S calipers
Precise ss lines
OZ SL's 18x8, med. gloss blk
Toyo RA-1

Sparco Mugello wheel
Sparco Milano blk/alc seats
Sparco pedals/knob
Sparco Harnesses

S4 front / RS4 conv.
S4 sides /rear valance
NS shortshift
Ecodes/Xenons
Bose
Rear seat uppers removed
one of those ghetto
cassette tapes with the wire
comin out for my ipod..

thanks for shopping..

Rieger_RS4
02-05-2005, 10:05 PM
where did you get the adapters for the Boxter calipers to work with the S4 rotors? I thought you had to get the 996 calipers to use the s4 rotors and A8 to use with boster.

1.8Titorey
02-05-2005, 10:09 PM
I like it! [:D] Where did you get the hub?

EDness
02-05-2005, 10:10 PM
HOTness!

azndrunk74
02-05-2005, 10:12 PM
Niceee...mind if I come check out your car next time I'm in Irvine visiting my parents?

Silvant
02-05-2005, 10:29 PM
sure jus Pm i guess..

hub is a momo, same as for a jetta/golf..

brakes were done with the EVOms kit..
boxter s and 996 calipers are the same..

thanks.

foofighter
02-05-2005, 10:30 PM
tight that rig is sick! i like the race wheel

Silvant
02-05-2005, 10:37 PM
danke.

Rieger_RS4
02-05-2005, 11:38 PM
Originally posted by Silvant
sure jus Pm i guess..

hub is a momo, same as for a jetta/golf..

brakes were done with the EVOms kit..
boxter s and 996 calipers are the same..

thanks.

Got it........was just wondering as I was planing to do the same brake upgrade in the spring

robots_are_neon
02-05-2005, 11:59 PM
nice!!!

BoostinA4
02-06-2005, 12:19 AM
i have those same harnesses also....and i have a sparco 330mm suede steering wheel with momo hub and quick release ...ill take pics tomorrow

Silvant
02-06-2005, 01:11 AM
nice... i feel im liking the 330 so far..
what did you do about your horn?
i was thinkin of rigging a hella set for one button
and a fmic mister to the other...
right now, no horn and still need a 1ohm resistor
for the airbag terminal..

SFexBOY
02-06-2005, 04:49 AM
sickkk

JMG
02-06-2005, 05:03 AM
damn your car is sick. Nice to see race seats/wheel on a car that can actually step up to the plate w/ stg3. gj and see you in the canyons.. i'll be in the rearview mirror if you ever see me.

Silvant
02-06-2005, 09:19 AM
ha.... thanks.

Weejie
02-06-2005, 11:02 AM
way nice ride - but holy $$$

Silvant
02-06-2005, 11:28 AM
well... not the smartest route but, damn enjoyable.

minira
02-06-2005, 03:49 PM
that looks real nice. how much do those seats weigh?

taek
02-06-2005, 08:30 PM
thats hot. im gonna do the same. but not all black.

Silvant
02-06-2005, 10:36 PM
dont know about the weight on the seats..
huge difference in the weight of the steering wheels though..

JMG
02-06-2005, 11:56 PM
Here's a new sig for ya

http://home.comcast.net/~jmg703/pics/silvant.jpg

Silvant
02-07-2005, 12:09 AM
yo, thanks man.. thats clean..
could you shrink my s/n WAY down or jus take it off? replace it with the audisport smaller under the
GMG logo?
wow, im picky considering you are doing me a free
service.. thanks in advance.

JMG
02-07-2005, 12:18 AM
Originally posted by Silvant
yo, thanks man.. thats clean..
could you shrink my s/n WAY down or jus take it off? replace it with the audisport smaller under the
GMG logo?
wow, im picky considering you are doing me a free
service.. thanks in advance.

like this?

http://home.comcast.net/~jmg703/pics/silvant2.jpg

sushi_turbo
02-07-2005, 12:27 AM
Nice, I love your steering wheel and the racing seats as well. May I ask where you got them?

Silvant
02-07-2005, 12:38 AM
thanks.. sig is perfect jmg...


you kind find both the seats and wheel online..
got the seat brackets from Wedge.

EVIL-AUDI
02-07-2005, 06:34 AM
Silvant don't F around man. Very nice.

Silvant
02-07-2005, 08:51 AM
ha.. thanks homie.

A4_wantanabe
02-07-2005, 09:25 AM
so are you running an airbag light now? Is all you need is an resistor?

Silvant
02-07-2005, 09:32 AM
its on right now for both the wheel and the rear seats..
planning on looping both plugs soon..
the wheel is a 1ohm.

A4_wantanabe
02-07-2005, 09:33 AM
werd, thanks!

Silvant
02-09-2005, 10:28 PM
true..

Kevin
02-09-2005, 11:16 PM
looks good, i like the stealthiness of black seats and wheels...very subtle.

what canyons you usally run at?

Silvant
02-10-2005, 12:30 AM
"what canyons you usally run at?"

it doesnt happen as often now that im in irvine but, i grew at the base of angeles crest.. been running all those routes since i was 16.. osbourne, pear blossum, backside of mtn high, santa monica mountains.. latigo, stunt, etc etc etc....
god thats making me drool.

1.8Titorey
03-21-2005, 10:43 AM
Silvant - were you able to get rid of the airbag light?

A4SUM
06-07-2005, 01:18 AM
*bump*

I need to find out how to get rid of the airbag light before i put my wheel in. what kind of resistor would i need?

beejohn
06-07-2005, 08:03 AM
hey Rieger_RS4 check your PM

goody6691
06-07-2005, 08:06 AM
wow we allmost have matching interiors. seats, harnesses, and wheel. looks great. i have had that wheel in for about 3 years. the leather is getting old and the alcantara is all matted down now.still looks good though. just get ready to answer the question "yo dude, you got NAWZ in this thing?" just look at them and say "NO, the little buttons are for the horn , you watch too many movies."

goody6691
06-07-2005, 08:10 AM
i could not get rid of the light . i was afraid to do the wheel airbag ,i coyldnt find the resistence. so i just took the dash apart and removed the light bulb.

Eurotuned_A4
06-07-2005, 05:16 PM
man im liking the buckets and wheel. one day ong from now..lol, i plan on getting some buckets. if only i had an unlimited amount of money.

A4SUM
06-07-2005, 05:19 PM
damn, i was hoping i wouldnt have to take the bulb out...yea, that button makes you go uber fast!..lol

goody6691
06-07-2005, 11:28 PM
i sold my ktm 250 and used the money to get my seats. and i would do it again . these seats are soooooo nice

$teady$upreme
03-31-2010, 11:05 AM
So anyone knows how to take that airbag light out after putting in an aftermarket steering wheel?

Altech75
03-31-2010, 02:38 PM
I didn't know we had threads from this long when.