quickaudi07
04-26-2010, 07:28 AM
What UP Everyone!!!
I just want to share a little project that i have done over the weekend.
Friday I got my new toy Kenwood DNX 9140, really nice radio with Garmin GPS and other goodies if anyone is interested look up and get it.. you going to love it.
I also got a Custom Box from Los Labs. I will show you the pics but this is a website where you could order one or call them. I have worked with Chris and Carlos from the shop and these guys know what they are talking about and what they are doing.. The box that i got was Great.. the JL10w7 Sounds Really Nice.. Better than my Kickers L7 12"!!!!
I needed the room in my trunk because Wife is expecting a Little Babe Girl so I need the room in the trunk they Los Labs Have helped me out with it Thanks Guys!!!
http://www.loslabs.com/product_detail.php?product_id=119
Box Link.
So let me Show you what I have done.. First few pics are not that great didn't see until i took them that my cam settings were off! So sorry for the first few pics.
This where i ran my power Cable, I have bought the kit from Kicker. The cables are very nice. Great product, easy to bend if you need to.
Here is a pic where i pushed the 4Gauge Amp wire.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4078.jpg
If you take of your cabin filter, and take out all the plastic crap that is in the way, you could push the wire though there.. I didn't take the picture of it, But you need to take out your glove box to fish the wire!!!!
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4079.jpg
I have Replaced my door speakers with Polk Audio 6105 6/ 1/2". The speakers came with Tweeters and a Crossover and also a Spacer which you will need if you plan on changing the speakers in the doors.
Sorry no pic of that....
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4073.jpg
Door panel being off.
I have not bought ENFIG Radio kit.. they wanted way to much money for it. Everything from the radio was run though RCA's So I made my own Connection If anyone needs help whit that I could tell you what you need to do..
I think the worst part of this whole install was to find the Speaker Wires and how they are color Coded. That took the longest but once I found all the wires and where they are going, After there the install of the door speakers began.
To bad i didn't take a pic of that sorry guys.
I know this pic is bad but this is when I started to do a Radio Install.
I got my Dash Kit from Sam From A & G Toys. He is located in IL, On 73rd 75th and Harlm Ave You cant miss it if you drive that way.
He does Awesome job with Cars Sounds, Video Audio, Rims, Alarms and other goodies for cars. The only reason why I didn't give my car to him for the install is because I wanted to do it my SELF!.
Radio Install:
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4076.jpg
After Radio was installed. It was time to install 4ch Earthquake amp. I found a nice spot to Mount the amp.. Right next the amp where the Stock OLD amp was. I have mounted Distribution Blox for the amps.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4080.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4081.jpg
After Getting the amp installed and testing making sure everything is working. I started on a Install of a Box.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4083.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4082.jpg
Since the JL is so big of a sub even for 10" I had to do some support to hold the box in place.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4084.jpg
I drilled in the box so i could screw in to the metal bar.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4085.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4086.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4087.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4088.jpg
I have put a padding in to the box.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4089.jpg
And now is time for sub install. Los Labs Thank you for this Custom Made Box, Sam Thanks for the tips and Radio Trim.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4091.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4106.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4107.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4103.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4102.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4103.jpg
This is What is being pushed by JL Audio
Kicker 1200.1 Since the amp could do 1ohm Stable ( I had it for my L7 Kickers that i have sold) Now I’m getting about 650-800RMs do to sub being only a 3ohm Sub.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4097.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4098.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4102.jpg
Few Pics of Kenwood DNX 9140
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4111.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4110.jpg
Guys I know after this post Los Labs will Make account on Audizine and see if they could sell some of there products for our Audi’s they may also do a pool buy. I got a Sub box for a left side. After talking with Carlos/Chris they told that they are working on the right side custom box as well.
Thanks for looking and I hope some of this was Helpful to you all,, If anyone needs any help with install or general question feel free to ask or PM me..
Los Labs Link - http://www.loslabs.com/product_detail.php?product_id=119
Sam On Harlem Address and info:
A & G Car Toys
7358 South Harlem Avenue, Bridgeview, IL 60455-1138(708) 563-1800
Once Again
Thank You All
I just want to share a little project that i have done over the weekend.
Friday I got my new toy Kenwood DNX 9140, really nice radio with Garmin GPS and other goodies if anyone is interested look up and get it.. you going to love it.
I also got a Custom Box from Los Labs. I will show you the pics but this is a website where you could order one or call them. I have worked with Chris and Carlos from the shop and these guys know what they are talking about and what they are doing.. The box that i got was Great.. the JL10w7 Sounds Really Nice.. Better than my Kickers L7 12"!!!!
I needed the room in my trunk because Wife is expecting a Little Babe Girl so I need the room in the trunk they Los Labs Have helped me out with it Thanks Guys!!!
http://www.loslabs.com/product_detail.php?product_id=119
Box Link.
So let me Show you what I have done.. First few pics are not that great didn't see until i took them that my cam settings were off! So sorry for the first few pics.
This where i ran my power Cable, I have bought the kit from Kicker. The cables are very nice. Great product, easy to bend if you need to.
Here is a pic where i pushed the 4Gauge Amp wire.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4078.jpg
If you take of your cabin filter, and take out all the plastic crap that is in the way, you could push the wire though there.. I didn't take the picture of it, But you need to take out your glove box to fish the wire!!!!
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4079.jpg
I have Replaced my door speakers with Polk Audio 6105 6/ 1/2". The speakers came with Tweeters and a Crossover and also a Spacer which you will need if you plan on changing the speakers in the doors.
Sorry no pic of that....
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4073.jpg
Door panel being off.
I have not bought ENFIG Radio kit.. they wanted way to much money for it. Everything from the radio was run though RCA's So I made my own Connection If anyone needs help whit that I could tell you what you need to do..
I think the worst part of this whole install was to find the Speaker Wires and how they are color Coded. That took the longest but once I found all the wires and where they are going, After there the install of the door speakers began.
To bad i didn't take a pic of that sorry guys.
I know this pic is bad but this is when I started to do a Radio Install.
I got my Dash Kit from Sam From A & G Toys. He is located in IL, On 73rd 75th and Harlm Ave You cant miss it if you drive that way.
He does Awesome job with Cars Sounds, Video Audio, Rims, Alarms and other goodies for cars. The only reason why I didn't give my car to him for the install is because I wanted to do it my SELF!.
Radio Install:
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4076.jpg
After Radio was installed. It was time to install 4ch Earthquake amp. I found a nice spot to Mount the amp.. Right next the amp where the Stock OLD amp was. I have mounted Distribution Blox for the amps.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4080.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4081.jpg
After Getting the amp installed and testing making sure everything is working. I started on a Install of a Box.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4083.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4082.jpg
Since the JL is so big of a sub even for 10" I had to do some support to hold the box in place.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4084.jpg
I drilled in the box so i could screw in to the metal bar.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4085.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4086.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4087.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4088.jpg
I have put a padding in to the box.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4089.jpg
And now is time for sub install. Los Labs Thank you for this Custom Made Box, Sam Thanks for the tips and Radio Trim.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4091.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4106.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4107.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4103.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4102.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4103.jpg
This is What is being pushed by JL Audio
Kicker 1200.1 Since the amp could do 1ohm Stable ( I had it for my L7 Kickers that i have sold) Now I’m getting about 650-800RMs do to sub being only a 3ohm Sub.
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4097.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4098.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4102.jpg
Few Pics of Kenwood DNX 9140
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4111.jpg
http://i879.photobucket.com/albums/ab355/mario1983/JL%20audio%20System%20System/IMG_4110.jpg
Guys I know after this post Los Labs will Make account on Audizine and see if they could sell some of there products for our Audi’s they may also do a pool buy. I got a Sub box for a left side. After talking with Carlos/Chris they told that they are working on the right side custom box as well.
Thanks for looking and I hope some of this was Helpful to you all,, If anyone needs any help with install or general question feel free to ask or PM me..
Los Labs Link - http://www.loslabs.com/product_detail.php?product_id=119
Sam On Harlem Address and info:
A & G Car Toys
7358 South Harlem Avenue, Bridgeview, IL 60455-1138(708) 563-1800
Once Again
Thank You All