PDA

View Full Version : RPM refrence/crank sensor compatibility question



Poopie
04-02-2010, 09:26 AM
Any one know if I can use a RPM sensor off the block from an AWP for an AWM? I have a sensor i pulled off a block i built and mine on the avant is on the fritz. anyone know for sure before i waste 10 mins swapping it?

Nebone
04-02-2010, 09:36 AM
AWP Part# 06A906433L
AWM Part# 078906433A

Poopie
04-02-2010, 11:02 AM
it works. The cable was short so i just unclipped the harness from the false firewall. I knew the part numbers were different. but i just thought the sensor would be the same since its the same block and crank.

Nebone
04-02-2010, 11:12 AM
Yea but orientation of them is different so cable lengths play a role here.

Poopie
04-02-2010, 11:13 AM
orientation is the same.

Nebone
04-02-2010, 06:02 PM
I mean those 2 motors are oriented differently.