Dzus Fasteners for Noise Suppression Cover (Belly Pan)

[VinnyR]

I'm trying to replace a lost half-turn fastener for my 2005 A4 Quattro 2.0L Belly Pan and cannot find the OEM part number. I have located the longer fastener (PN 8D0-805-121), but am interested in locating the shorter pins that fasten the front of the Belly Pan to the bottom of the front bumper cover (they have a rubber grommet attached). I've had two misses at my local Audi Dealer and am trying online sources at this point. Would appreciate any help.

[AWDTURBO]

2005 is B6, now a 2005.5 is B7 which do you have :)

[trevor51590]

2005 is B6, now a 2005.5 is B7 which do you have :)

Did the B6 come with a 2.0?

[RightonRed]

Did the B6 come with a 2.0?


Nope, B6 = 1.8T and 3.0
B7 = 2.0T and 3.2

[VinnyR]

I have a 2005.5 2L (B7) Quattro.

[sinned]

I believe the long black fasteners have the rubber, since they need the extra length to accomodate the rubber washers to protect against painted surfaces. The silver ones are shorter and do not have rubber washers and fasten black plastic parts together.

[Matt@EuropaParts]

Is this what you're looking for? http://www.europaparts.com/dowel-pin.html

[VinnyR]

Is this what you're looking for? http://www.europaparts.com/dowel-pin.html

Thanks for the follow up. This part is the 8D0-805-121 dowel pin and they come in black and silver finish. I've bought each of them in this journey and found that they are both the same length. I'm actually looking for one that is about half the length, where the threads run pretty close to the pan head. I'm pretty sure that the rubber grommet is there to pick up slack between the bumper cover and belly pan. The Audi Dealer stocks the longer -121 & -121b parts. I haven't yet been able to find the part number for the shorter version.