View Full Version : Dension GW100 Install in B7 A4
Korrect414
02-01-2010, 02:07 PM
I'm about to install this in my car and just had a few questions. Since I don't have an OEM Ipod already, will the cable run from my glovebox to the RNS E, or do I need to drill a hole for the cable ? I didn't plan on removing the glovebox for this, is this okay ? I'm not great at installing electronics and just figured I would do the install myself to save some cash and learn more about my car. I've watched the enfig youtube vid on installation and it seems to be pretty straight forward. I just want to make sure I don't run into any unexpected issues.
Thanks
You might night to drop the glovebox.
Korrect414
02-01-2010, 08:58 PM
You might night to drop the glovebox.
Ok,do I need to drill a hole for the cable ?
Ok,do I need to drill a hole for the cable ?
On most audis, no.
Korrect414
02-02-2010, 01:52 PM
On most audis, no.
Cool, thanks.
Korrect414
02-02-2010, 02:08 PM
Just to make sure I have everything correct.
1.Pull head unit
2.drop glovebox and run cable through
3.plug in and test everything
4.put head unit back in
5.put glovebox on
Basically. If you unplug the power connector from your radio, however, keep in mind that you will need your radio code.
Korrect414
02-02-2010, 03:06 PM
Basically. If you unplug the power connector from your radio, however, keep in mind that you will need your radio code.
No problem. I have the code taped to the RNS E
Korrect414
02-05-2010, 11:01 AM
Just installed everything. Longest part was running wire to the dash. It wasn't easy with my big hands. Probably would've been easier if I dropped the glovebox. No big deal. The controls are a bit hard to get used to. The sounds quality is great. Very happy with it.