PDA

View Full Version : Correct Oil Restrictor for T3/T4 on 1.8t?



Oceanside
01-22-2010, 01:44 PM
So I have a .63 oil restrictor from obx in use now and apparently its wrong cause my oil seals are blown leaking oil into my exhaust and intake. Im about 300 miles into break in and i took it up to about 6k ( never took it above 3.5 till now) and afterwards it all started. What is the correct restrictor? links? also is it worth it to get the 360' gapless oil seals for my t3? where? I REALLY need these very fast as Im about to drive across the state next weekend for Rolex 24 hour at Daytona
Thanks in advance

Lou_B5
01-22-2010, 08:53 PM
Damn dude my bad I thought you had a gt turbo not a journal t3t4. That what you have is good. If anything you don't want a restrictor on journal bearing turbo. Gt turbo is .032

You must have something else going on.

20vpower
01-23-2010, 09:33 AM
This is what I am using, and Ive had no problems...

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-OIL-022&Category_Code=ATP-OIL1