GetBoosted84
12-23-2009, 11:46 AM
Selling my Southbend Stage 5 Ceramic Clutch (8-Puck) because my goals have changed for the car and I want to focus on my RX-7.
I just had the pressure plate re-surfaced and got a new clutch plate (0 miles) because I wanted to get away from the Fermatic full face stage 5 clutch. If you've done research on the fermatic material, you've probably seen that a lot of people have issues launching with them which is why I went with ceramic.
I will also be including a clutch alignment tool and an upgraded throwout bearing. Normally the throwout bearings that you get (stock and aftermarket) are plastic but I upgraded to a metal one so that I wouldn't ever have to worry about it.
Any questions, shoot me a PM.
Link to Classifieds:
http://www.audizine.com/classifieds/showproduct.php?product=26962
http://www.audizine.com/classifieds/data/12/large/100_1338.JPG
http://www.audizine.com/classifieds/data/12/large/100_1343.JPG
http://www.audizine.com/classifieds/data/12/large/100_1342.JPG
I just had the pressure plate re-surfaced and got a new clutch plate (0 miles) because I wanted to get away from the Fermatic full face stage 5 clutch. If you've done research on the fermatic material, you've probably seen that a lot of people have issues launching with them which is why I went with ceramic.
I will also be including a clutch alignment tool and an upgraded throwout bearing. Normally the throwout bearings that you get (stock and aftermarket) are plastic but I upgraded to a metal one so that I wouldn't ever have to worry about it.
Any questions, shoot me a PM.
Link to Classifieds:
http://www.audizine.com/classifieds/showproduct.php?product=26962
http://www.audizine.com/classifieds/data/12/large/100_1338.JPG
http://www.audizine.com/classifieds/data/12/large/100_1343.JPG
http://www.audizine.com/classifieds/data/12/large/100_1342.JPG