PDA

View Full Version : Anybody have H&R race springs and 19 inch wheels?



Quattrocket
01-03-2005, 02:40 PM
if so did u have to modify the fender at all?

Quattrocket
01-03-2005, 03:03 PM
im not sure if they will fit

Chard
01-03-2005, 03:31 PM
Check out the link in my sig (Suspension for Sale). It's got pics of my car with 19's and Race springs (and Bilstein shocks). The shocks are adjustable for ride height, so I guess the answer to your question depends on where my shocks were set at.

On the highest perch to around the middle, it would be fine to drive regularly with slight rubbing when cornering hard or hitting a bump in the road at higher speeds.

Anything lower, and I had to roll the fenders.

It also depends on the width and offset of your rims. A 19x8.5 rim with a 35 mm offset is definitely going to rub, but you might be able to get away with a 19x8 with a 38mm offset.

In any case, it isn't too hard to roll your fenders yourself. Post up another thread if you need help on that one [:)]

EVIL-AUDI
01-03-2005, 03:42 PM
Yep, I have that setup, and it will rub depending on your shocks.