My Avant S6 LED Install - with Pics [Archive]

View Full Version : My Avant S6 LED Install - with Pics

tgt

09-20-2009, 07:54 PM

After much deliberation (between FLY's LEDS and installing/modding the S6 LED's), I decided to give the S6's a go. Something about them being in the bumper just looked great to my eyes (don't get me wrong, I love FLY's and he does a terrific job).

I decided to follow nnnicks lead and install the S6 LED's on the Avant. I won't go into great detail with the exception of what I did differently than nnnick.

nnnicks DIY post: http://www.audizine.com/forum/showthread.php?t=308109&highlight=led

Thanks to nnnick, enigma, and 10mpg for their pics/info from the past.

Differences from nnnick's install:
-I installed the LED's flush with the inside of the bumper (rather than notching the inside of the bumper) ala enigma/10mpg. This made for some interesting fit of the outside of the LED around the intercoolers, however, it JUST fits. :)
-I wired the LED's to the ignition (tapped into fuse #7 and ran the wire into the cabin fuse box)
-I really liked enigma/10mpg's grilles (the way their shops customized the OEM grilles), so I decided to go that route. Cutting the grilles down, filling the fog light hole, 'creating' the grille bar across the middle, and then sanding, bondo, sanding, bondo, etc. etc. was a HUGE pita. I'm happy with the results (they aren't 'perfectly smooth' yet, but I'm glad I decided to go that route). For now I didn't create the top grille bar like enigma/10mpg did, as I actually liked how the bottom of the LED shows as it does on the S6. If I change my mind I'll create it later.

**I know some have mentioned concerns about the LED's blocking some additional air flow to the IC's. If after some driving I think there is any hampering of air flow, I plan to cut out the exterior (that is always blocked, even on the OEM grilles) solid areas which should provide more air flow than stock.

Onto some pics. Unfortunately just after installing the fog grilles it started to rain (so I only snapped a few pics). I will take proper pictures later. Any questions from those considering this...I'm happy to assist/answer.

Thanks,
tgt

Final Pics:
http://www.tgt24.com/2006Avant/092009/027.JPG
http://www.tgt24.com/2006Avant/092009/033.JPG
http://www.tgt24.com/2006Avant/092009/029.JPG

Pics of LED's prior to grilles being complete:
http://www.tgt24.com/2006Avant/091809b/006.JPG
http://www.tgt24.com/2006Avant/091809b/008.JPG
http://www.tgt24.com/2006Avant/091809/036.JPG
http://www.tgt24.com/2006Avant/091809/018.JPG
http://www.tgt24.com/2006Avant/091809/026.JPG
http://www.tgt24.com/2006Avant/091809/008.JPG

Pics of the grille fab:

Steps:
-Trim fog light grille to fit
-Cut out fog area of grille
-Use tape of your choice and crate 'backing' (something for the Fibre hair body filler to hang onto. I got the filler from Napa). I used TWO coats of this filler to create the bar area.
-Sand (A LOT, this was EASILY the most time consuming thing)
-Body Bondo to Smooth (Note: the body bondo is different than the fibre hair body filler)
-Sand
-Body Bondo
-Sand
(you get the idea, you need to do this until it's smooth and the imperfections are gone)

http://www.tgt24.com/2006Avant/092009/009.JPG
http://www.tgt24.com/2006Avant/092009/005.JPG
http://www.tgt24.com/2006Avant/092009/007.JPG
http://www.tgt24.com/2006Avant/092009/013.JPG
http://www.tgt24.com/2006Avant/092009/019.JPG

AudiXS4X01

09-20-2009, 07:56 PM

great job! look amazing!

enigma1406

09-20-2009, 07:57 PM

well done. looks good.

Quattro

09-20-2009, 08:29 PM

nice :)

DeanUW

09-20-2009, 08:39 PM

Nice work!

nnnick

09-20-2009, 08:45 PM

looks awesome! very clean indeed. i like the grills too, I might have to try this out wiht my old grills lying around and compare them side to side...seems straightforward enough based on how you did it, I like the use of duct-tape :)

Do you have a close up of the wiring into the fuse box? Might have to give that a try.

Msu2312

09-20-2009, 08:49 PM

damn super bright, awsome

05.5SilverS4

09-20-2009, 08:52 PM

looks awesome. this makes me on the fence as well in some aspects on whether to do this or FLY's

tgt

09-20-2009, 08:53 PM

Thanks all.

nnnick - I will snap a pic of that tomorrow. I used a mini fuse tap and tapped into the fuse box (driver's side, side of the dash).

-tgt

Msu2312

09-20-2009, 08:53 PM

imagine both lol

RedS-line

09-20-2009, 09:57 PM

they look awesome but bump for some closeups on the car. you will want a fmic when it gets hot out again.

TehDolphin3.2

09-20-2009, 10:08 PM

Looks really good...well done!

TheRealtor

09-20-2009, 10:12 PM

bookmarked for future reference :p

RJMars

09-21-2009, 01:19 AM

Cleaaaannnn installll

redlabel81

09-21-2009, 01:32 AM

Real Nice! Now to match them with Phils leds :)
Isn't it easier to just use the S6 fog grills? Cost next to nothing and not as much work as the B7 ones.

tgt

09-21-2009, 05:21 AM

Isn't it easier to just use the S6 fog grills? Cost next to nothing and not as much work as the B7 ones.

Unfortunately not, BELIEVE me I looked into it. The S6 grills are a different curvature, so even though they are less work (to trim/cut down/etc.) the fit is not like the stock grill.

I would have MUCH preferred to go that route. [;)]

-tgt

redlabel81

09-21-2009, 06:54 AM

I see. Thanks :)

Sharkfin

09-21-2009, 07:04 AM

Looks awesome, I'm considering this for my DTM bumper before I do a respray. Was the wiring easy since they include a kit for it?

tgt

09-21-2009, 08:19 PM

Sharkfin - Wiring is easy. I did not use a separate harness, just ran the power/ground to the LEDs and connected them.

nnnick - Sorry, ran out of time tonight for the wiring pic. Will try again tomorrow night. :)

Someone requested closer pics, here's a couple. I put a piece of 'door edge trim' (had some laying around) on the top lip of the grille and actually likely the way it looked so left it on. Passenger side grille wasn't completely fastened in the last pic.

http://www.tgt24.com/2006Avant/092009/035.JPG
http://www.tgt24.com/2006Avant/092009/039.JPG
http://www.tgt24.com/2006Avant/092009/031.JPG

-tgt

Sharkfin

09-21-2009, 08:55 PM

where did you buy them from?

dbcperformance

09-21-2009, 09:03 PM

awesome[up]

artinmoTTion

09-22-2009, 12:18 AM

Looks great! Did these on my custom DTM bumper for our Avant a bit over a year ago, and they've always looked great. Nice to see another hot avant steppin' out... For the record, I've never experienced any obvious effects from the minor blockage of air that these present for the SMICs, and simply don't worry about it.

lodidodi

09-22-2009, 01:22 AM

the Leds look great. Not to be too off topic but how does that epoxy floor covering you have on your garage floor hold up? I'm looking at doing my garage before winter.

tgt

09-22-2009, 06:05 PM

lodidodi - Very well, have been really impressed. If you do it I would recommend the clear top coat (which is the route I went). Really keeps the shine and makes it durable through the elements.

nnnick:

Fuse box pic:
http://www.tgt24.com/2006Avant/092209/003.JPG

-tgt

nnnick

09-22-2009, 06:22 PM

thanks for the pic. Did you add a fuse to the wiring in the picture above?

tgt

09-22-2009, 06:31 PM

Yessir, added an inline fuse 'just in case'.

tgt

09-22-2009, 07:23 PM

where did you buy them from?

http://www.umnitza.com/umnitza-aries-audi-tfldrl-light-p-5652.html

-tgt

staticuxo

09-22-2009, 07:31 PM

looks awesome, tgt.. definitely the cleanest install done with the s6 LEDs yet! [up]

by the way, i'm still running your rs6's.. but i just got 2 tires replaced due to hitting a pot hole and having them bubble, haha.

tgt

09-22-2009, 07:43 PM

Sharkfin

09-22-2009, 08:27 PM

http://www.umnitza.com/umnitza-aries-audi-tfldrl-light-p-5652.html

-tgt

I was hoping you would say them, I'm considering this because their price is 150 less than the next best competitor. Hmmmmm.....

digzz

09-23-2009, 06:47 AM

Have you patched it up so the S6 LED lights Stay on during the day with out the side lights being turned on ?

Hockenheim

09-23-2009, 11:30 AM

Outstanding work, I've been wanting to do this but too chicken to start cutting up my car

tgt

09-23-2009, 11:45 AM

Have you patched it up so the S6 LED lights Stay on during the day with out the side lights being turned on ?

Not exactly sure what you mean. I wired them up to come on with the ignition (per the 1st post), so no other lights have to be on. Can you clarify the question?

Thanks,
tgt

digzz

09-23-2009, 01:25 PM

Not exactly sure what you mean. I wired them up to come on with the ignition (per the 1st post), so no other lights have to be on. Can you clarify the question?

Thanks,
tgt

Thanks you just answered my question.... How did you know how to wire it up? Also did the led's come witrh the wire ?

redlabel81

09-23-2009, 01:58 PM

Really like it, but at the same time I miss the round fogs....:)

tgt

09-23-2009, 02:05 PM

Thanks you just answered my question.... How did you know how to wire it up? Also did the led's come witrh the wire ?

It's not difficult. Just a power wire and a ground wire (also an optional wire if you want them to blink with the turn signals like OEM, but I did not want that). [drive]

-tgt

S4SHOES

04-06-2011, 05:44 PM

super clean install!
just ordered my oem s6 led's hopefully installing next weekend with help from all 4 threads. will post pics after
thanks for all of this info (would have been lost without it)

A4A4A4

04-06-2011, 05:49 PM

super clean install!
just ordered my oem s6 led's hopefully installing next weekend with help from all 4 threads. will post pics after
thanks for all of this info (would have been lost without it)

Thread is from a year and a half ago, FYI.

D0lphinGrey

04-07-2011, 04:27 AM

Am I the only who thinks S6 LEDs are more OEM looking on our B7s than any LEDs in headlights? It just flows with the car so well.

Crufitz90

04-13-2011, 02:00 PM

I've been looking for the lower grilles to do this modification. If anyone could tell me the part number or which lower fog grill it is(b7 sline, a6,s6). I'm going to do the mod, I just need to know which fog grills were used.

-"I really liked enigma/10mpg's grilles (the way their shops customized the OEM grilles)."

I'm looking for these grills he's talk about.

Thanks in advance for the answer.

tgt

04-14-2011, 04:24 AM

If you look above, they are the same grilles I used. OEM grilles s-line grilles fabricated.

Good Luck,
tgt

I've been looking for the lower grilles to do this modification. If anyone could tell me the part number or which lower fog grill it is(b7 sline, a6,s6). I'm going to do the mod, I just need to know which fog grills were used.

-"I really liked enigma/10mpg's grilles (the way their shops customized the OEM grilles)."

I'm looking for these grills he's talk about.

Thanks in advance for the answer.

Lazze

04-14-2011, 05:43 AM

Looks awesome!!!

VdTechnofreak

04-14-2011, 09:48 AM

I likes 'em--and especially the garage-freezer workbench...

Regarding cooling requirements, he's in Cheeseland--as a former cheesehead, I can attest to the fact that on the one or two days a year he MIGHT have cooling probs. it just means he can't thrash it.

S4SHOES

05-04-2011, 09:05 PM

thanks for paving the way....
just finished my install check out the thread
http://www.audizine.com/forum/showthread.php/427913-s6-led-fogs-on-a-b7-s4?p=6474730#post6474730

milk

04-27-2016, 05:40 PM

Just wanted to say great job - anyone wanna challenge themselves and add a few more LEDs?

Sorry for the crappy Paint edits but you get the idea:
https://4vpcgw-bn1305.files.1drv.com/y3mNh1H1IeBjdJz21g8u58LiVR_Y-v3PdBKGU1vjbyuyL0MYxxzkQX0hUCBhMs5Qz6Sf-UsmL04ZtAMm5F4gIvTV1QK-cBgJRISr_qJKNyuxbU4gsbrIoai-KA41L8ZaZxC3IhBP524cu0wlYS7_HKrZRNYWORY8QN-zdBbocCEfqs?width=1024&height=768&cropmode=none

https://4v92gw-bn1305.files.1drv.com/y3mgIxrppOE0X6RaE0ag8HPgj4vVMsUmF2Hj7moR7nEgMPYvHW yi26OVBmXgvu6xblIjeUJvpJG_WNsJgO6acUHicH9nWeDlXjMz 6VyrM7I1wyNTfMqN_68TlE-CzgudEhKag6GqAhZGidE9rYpH9yjJri3ZQCximzm0hqp-7i4AEE?width=799&height=536&cropmode=none

https://4f98gw-bn1305.files.1drv.com/y3mGd2dEwXtUsZ91as7FcI-X3ygfc8dwB_mU0c_5n_HtQH0GPW0jjBVYm07pf4Ih5cZAfuiow rHUTnwe5H3RqCxM94QNstaJ49Wcq7B6DqbtfqRarnY2brRO-3A19pK9COUzFDkBdyOq--z-HEF7OeZnK0qzQJ5CtEYeX4vzsHFdbE?width=1024&height=682&cropmode=none

Axis

04-27-2016, 06:15 PM

http://uploads.tapatalk-cdn.com/20160428/6e1b00516ce43e5e4cc9437c6d2b299e.jpg

AJacksA4

04-27-2016, 06:46 PM

I sorta dig it

Demonface

04-28-2016, 03:00 PM

torrque

04-28-2016, 07:31 PM

Gotta be the best mod I have seen on a car, ever !

Sent from my SM-N910V using Tapatalk