PDA

View Full Version : Oil preassure



Jc61990
08-30-2009, 10:42 AM
Okay so I installed my op sender and just wondering what idle and part throttle press should be. Also my oil light is blinking dunno if that's for the orig sender not being there or of it's cause I have low oil. I did loose a little oil when I installed it

Jc61990
08-30-2009, 12:03 PM
Anyone?

mike-2ptzero
08-30-2009, 02:32 PM
Around these numbers

75psi cold idle
25psi warm idle

part idle is going to be anywhere from 50-100psi.



Your oil light is on because you removed the stock sensor.

Jc61990
08-30-2009, 02:36 PM
I was around 40psi idle 80-100 part/full throttle. I'm also a little low on oil I'll have add some later

mike-2ptzero
08-30-2009, 03:18 PM
Pressure readings will also be different depending on the oil weight used, thinner oil will have lower pressure since flow will be higher.

////D
08-30-2009, 08:27 PM
Around these numbers

75psi cold idle
25psi warm idle

part idle is going to be anywhere from 50-100psi.



Your oil light is on because you removed the stock sensor.

x2 that's exactly what my car reads