STaSIS exhaust gasket

[eclpsgsx97]

I need a new exhaust gasket for the flange where the exhaust splits into two pipes--the tail end of the downpipe. It's a 3-bolt flange that isn't too common, so I'm having trouble finding one. Does anyone know where I could find one?

[IceMole]

Not to be captain obvious but have you tried calling stasis?

[eclpsgsx97]

Well, the exhaust I've got isn't actually stasis. It's a Thermal R&D prototype that never went into production. The stasis is the only other exhaust I've seen with the same type of flange, but I'm not sure if it's exactly the same.

I was hoping it's not a custom flange, and maybe someone knew if they could be available at a local parts store so that I didn't have to order one, wait days for one, and end up being wrong anyway.

[Scott Evil]

I don't think you are going to find one any place other than Stasis. I had to replace mine when I did the clutch--the original could not be reused. I called Stasis and they sent it from the west coast to Ohio in 2 days.

Bolt your car back together in the interim. It will leak, but it is only temporary. If the Stasis gasket does not fit, you could fabricate one or use lots of paste.

[eclpsgsx97]

Yup, same situation for me. Did the clutch about a month ago, and the gasket broke apart a bit. The leak has gotten worse, so I really need to get under there and replace it. I'll give stasis a call, and hope it's a match. I don't want to have to use the "cut your own" gasket sheets.