PDA

View Full Version : *** 034 : Coil Pack Harness UPDATE ***



Wizard-of-OD
07-31-2009, 07:19 PM
Harness Update , 1.8t 4-wire Coil
The VW and Audi 1.8t engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation. This is surprisingly common on cars less than 5 years old. The dealer recommends replacing the entire engine harness for over $1200.

Our harness solution uses automotive grade wiring and harness building materials designed to withstand years of abuse and offer an affordable, elegant solution.

12 wires need to be cut and crimped onto the OEM wiring, simply assemble the DT connector and plug the rest in.

http://www.034motorsport.com/oscthumbwm/w/700/h/700/q/95/f/jpg/fltr/wmi|phpThumb/watermarks/034watermark|C|20|0/hash/4169300b486ff3c8da7a86695f56d5f7/src/images/1.8tRepairHarness1.jpg
http://www.034motorsport.com/oscthumbwm/w/700/h/686/q/95/f/jpg/fltr/wmi|phpThumb/watermarks/034watermark|C|20|0/hash/db1201284fb010f66d613ccb18f7d910/src/images/1.8tRepairHarness2.jpg
http://www.034motorsport.com/oscthumbwm/w/700/h/679/q/95/f/jpg/fltr/wmi|phpThumb/watermarks/034watermark|C|20|0/hash/67d4d344dae59774c46db124b0ad9462/src/images/1.8tCoilharness3.jpg



AZ Intro Special = 180 USD SHIPPED

PLEASE SEND OVER A PM or CALL 510.275.4775 when you are ready to order.[up]

DamagedGoods
08-01-2009, 07:24 AM
I had to replace my coilpack wiring harness, I used the ECS harness they have for VW's which was easy enough just took a lot of patience, tracing & splicing. this should be much easier. is this for AEB cars or will it work on all? good looking product.

Wizard-of-OD
08-01-2009, 07:26 AM
I had to replace my coilpack wiring harness, I used the ECS harness they have for VW's which was easy enough just took a lot of patience, tracing & splicing. this should be much easier. is this for AEB cars or will it work on all? good looking product.
It will work on all 1.8T's
just specify which engine code you have when you are ordering.