B6 A4 Wheel Thread

[keller1095]

Brand/Name: OEM B6 S4 avus wheels
Size: 18x8
Offset: et45
Spacer(s): N/A
Camber: a little
Tires: Falken
Suspension: BC Racing Type BR coilovers
Spring Rates: 14k front and back
Ride height: Low!!
Fender mods: N/A
Rubbing: a little
Brake Spec: Stock


https://farm1.staticflickr.com/392/19251864743_d68711ddca_z.jpg (https://flic.kr/p/vkdQEt)21006_1106863589341553_173891096717297801_n (https://flic.kr/p/vkdQEt) by Matt Keller (https://www.flickr.com/photos/134923913@N06/), on Flickr

[A4SlineWA]

Brand/Name: VMR V710
Size: 18x18.5
Offset:+35
Spacer(s): none...soon 10mm in the rear
Camber:
Tires: 235/40/18
Suspension: USP...soon to be H&R or Eibach
Spring Rates: USP
Ride height:
Fender mods: none
Rubbing: none
Brake Spec: USP

http://i2.photobucket.com/albums/y10/dakind916/image.jpg3.jpg (http://s2.photobucket.com/user/dakind916/media/image.jpg3.jpg.html)

http://i2.photobucket.com/albums/y10/dakind916/image.jpg1_1.jpg (http://s2.photobucket.com/user/dakind916/media/image.jpg1_1.jpg.html)

http://i2.photobucket.com/albums/y10/dakind916/image.jpg1.jpg (http://s2.photobucket.com/user/dakind916/media/image.jpg1.jpg.html)

[B6ayfour]

Brand/Name: RS4 Reps
Size: 18x8
Offset:
Spacer(s): none
Camber: none
Tires: 235 45 18
Suspension: 02 sport suspension
Spring Rates:
Ride height:
Fender mods: none
Rubbing: over big bumps
Brake Spec: stock

http://www.audizine.com/gallery/data/500/medium/usp21.JPG
http://www.audizine.com/gallery/data/500/medium/IMG_1367.JPG

[mauromj]

Brand/Name: CCW Reps
Size: 18x9.5
Offset: et25 all around
Spacer(s): none
Camber: Lots in the back. Whatever lowering did to the front with OEM control arms
Tires: 215 40 18
Suspension: ST Coilovers
Spring Rates: Stock up front. 800lb 6in springs in back.
Ride height: Low. Think I am in the 23in FTG range.
Fender mods: Rolled. "Pulled" as much as I could with a fender roller.
Rubbing: None in back. Slight amount in front on turns + bumps.
Brake Spec: B5 HP2

http://i163.photobucket.com/albums/t282/mauromj7/Matt%20Audi%207_zpsg16y7zgo.jpg

[jman41]

Brand/Name: CCW LM5T
Size: 18x9.5/18x10
Offset: +20
Spacer(s): None
Camber: -2.3° front and -3.5° rear
Tires: Hankook V12 215/40
Suspension: ST coilovers
Fender mods: Fronts rolled
Rubbing: Fronts rubbed turning at full lock - Rear tire rub inside wheel-well over large bumps at highway speed

https://c1.staticflickr.com/9/8704/16340756863_fae5716ce6_b.jpg

https://c2.staticflickr.com/4/3757/19640055731_bb8a2ba17d_b.jpg


Brand/Name: Rotiform NUE
Size: 19x10
Offset: +35
Spacer(s): None
Camber: -2.3° front and -3.5° rear
Tires: Continental ExtremeContact DWS 225/35
Suspension: ST coilovers
Fender mods: Fronts rolled - Rears lightly pulled
Rubbing: None

https://c1.staticflickr.com/1/577/21874242450_ee42d96fb1_b.jpg

https://c1.staticflickr.com/1/646/22993408275_c6cdb7ef97_b.jpg

[w0ady]

Almost forgot to post here!

Brand/Name: Alzor Style 620 (Peeler reps)
Size: 18x8 square
Offset: 35
Spacers: 8mm front, 5mm rear
Camber:
Tires: 235/40/18 Sumitomo HTR Z III
Suspension: Neuspeed springs, OEM shocks front, Koni Yellows rear
Spring Rates:
Ride height:
Fender mods:
Rubbing: large bumps, but want to add Koni Yellows up front and stiffen them up

http://i168.photobucket.com/albums/u181/w0ady/FB_IMG_1447638602582.jpg

[jesse500]

Question:

I was looking into running 19 x 8.5 Front (ET35) and 19 x 9.5 rear (ET 38) on a 04 A4Q Sedan. Stock USP sport suspension (will remain at that height). Seems guys are running 9.5's after some googling, but I don't want to roll/pull fenders. Will a 9.5" on the rear fit with a little wider tire? What would be a good matched (size/height/diameter) tire for front & rear. Say 235/35/19 front, 265/30/19 rear. Would a 265/30/19 fit on the back on the car, without rubbing? Fender or suspension? Am I limited to 235's on the front? Or would say a 245/35/19 fit? Would the tire size be too far off for the AWD system? 25.26" for the 265's, 25.48 on the 235's, I can't see 0.22" making much a difference, heck, I'm sure thats almost a bias between brands, for same listed tire size.

https://www.tacomaworld.com/tirecalc?tires=265-30r19-235-35r19

[xciso]

Hi. I have a Audi A4 B6 2004 1.8TS Quattro (limo).
I have found new nice wheels to a verry good price, but I dont know if they will fit.
They have 2 different wheels.

1. 9.5x19 ET20 - Will this work to my car? If not.. do you think will work with small mods like fender rolling?

2. 8.5x19 ET47 - This I think will fit, but will it looks good with ET47? Yes I can use about 15mm spacer, but i think the bearing will take damage with so thick spacer.

Thanks. :)

[sashoxx]

Brand/Name: BMW X5 style 132. made by ronal
Size: 9x19 front. 10x19 rear
Offset: et48-15 front, et45-15 rear
Spacer(s): 15mm adapter 120 to 112
Camber: -3ish at the back
Tires: Maxtrek ingens 225/35
Suspension: FK AK Coilovers
Spring Rates:
Ride height: low
Fender mods: none
Rubbing: at the back. rim hits arch sometimes :D
Brake Spec: stock
http://i955.photobucket.com/albums/ae35/sashoxx/ass1.jpg (http://s955.photobucket.com/user/sashoxx/media/ass1.jpg.html)
http://i955.photobucket.com/albums/ae35/sashoxx/IMG_0315%201.jpg (http://s955.photobucket.com/user/sashoxx/media/IMG_0315%201.jpg.html)
http://i955.photobucket.com/albums/ae35/sashoxx/IMG_0311%201.jpg (http://s955.photobucket.com/user/sashoxx/media/IMG_0311%201.jpg.html)
http://i955.photobucket.com/albums/ae35/sashoxx/2016-01-10%2015.25.15.jpg (http://s955.photobucket.com/user/sashoxx/media/2016-01-10%2015.25.15.jpg.html)

[lovemyawd]

http://www.audizine.com/gallery/data/500/20160321_134623_1458654322_15398.jpg




Brand/Name: Alzor 881
Size: 18x9.5
Offset: +35 et
Spacer(s): 5mm all 4 corners
Camber: -2* all 4 corners
Tires: 235/40/18 Continental Extreme Contact DWS
Suspension: ST Coilovers
Spring Rates: Factory ST rates
Ride height: About 24.75" all 4 corners
Fender mods: Top tab off front liners cut out. Fronts getting rolled soon
Rubbing: Rubs liners over big bumps or when I have passengers
Brake Spec: B6S4 brakes front and rear

[ZERO FRAME GRAB]

Brand: Audi A8 factory wheels
Size: 19x9
Offset: Honestly have no clue
Spacers: Nope
Camber: Nope
Tire: Nankang Noble Sport 235/35/19
Suspension: Raceland Coilovers
Spring Rate: No clue
Ride height: Never checked
Fender mods: Nope
Rubbing: The front will bottom out over a speed bump other than that nothing.
Brake specs: Factory

http://www.audizine.com/gallery/data/500/20160418_184415-800x450_1_.jpg

[A4 Quattro]

Figure it's time I update my setups on here.

Brand/Name: VMR 708
Size: 18x8.5
Offset: +35
Spacer(s): no
Camber: We don't talk about those things
Tires: 225/40
Suspension: Airlift Performance
Ride height: Lowwwwww
Fender mods: Paint loss because weight reduction
Rubbing: Only if I drive low asf
Brake Spec: stock

http://eurofreak.org/Audi%20Pictures/B6/wheels/wheelthread/vmr.jpg



Brand/Name: Rotiform BLQ
Size: 18x8.5
Offset: +35/+45
Spacer(s): no
Camber: We don't talk about those things
Tires: 225/40
Suspension: Airlift Performance
Ride height: Lowwwwww
Fender mods: Paint loss because weight reduction
Rubbing: Only if I drive low asf
Brake Spec: stock

http://eurofreak.org/Audi%20Pictures/B6/wheels/wheelthread/blq.jpg



Brand/Name: Avant Garde M220
Size: 18x9
Offset: +38
Spacer(s): no
Camber: We don't talk about those things
Tires: 225/40
Suspension: Airlift Performance
Ride height: Lowwwwww
Fender mods: Paint loss because weight reduction, removed fender liners
Rubbing: Only if I drive low asf
Brake Spec: stock

http://eurofreak.org/Audi%20Pictures/B6/wheels/wheelthread/ag.jpg
http://eurofreak.org/Audi%20Pictures/B6/wheels/wheelthread/ag2.jpg

[ttvick]

Sorry if this isn't the right thread for this question, but I wasn't sure where else to post it. Has anybody seen photos of '09 A6 Prestige wheels on a B6? I'm looking at a set, but it's hard to imagine it hasn't been done before and it would be great to see a picture of what they would look like.
http://imagecdn2.panjo.com/images/detaillarge/95375d0d-5c39-4f5b-b755-67d1b6b14a9c.jpg

[jayaye4]

Guys... I'm sorry to noob it out but i have a 03' a4 b6 and the tires i'm running are 235/45/17

the rims i was looking at are 17x7 offset 42.. will they fit?

[Zach.russell.13]

Guys... I'm sorry to noob it out but i have a 03' a4 b6 and the tires i'm running are 235/45/17

the rims i was looking at are 17x7 offset 42.. will they fit?

I'm no wheel guru but I've been reading up on wheels lately & that sounds like it should fit, I'm getting 245/35 on a 18/8.5 wheel

[kristof91]

Brand/Name: OEMS IFG10
Size: 20x10/20x10
Offset: Front 45/ Rear 45
Spacer(s): Front 10
Tires: Haida HD921 225/30R20
Suspension: KW Suspension V2
Fender mods: NO
http://i.imgur.com/NkQ28ZY.jpg
http://i.imgur.com/Xvq9fJQ.jpg
http://i.imgur.com/xb3c4Fr.jpg
http://i.imgur.com/zRhYYyI.jpg
http://i.imgur.com/3X3GZBq.jpg
http://i.imgur.com/WwAFjvL.jpg
http://i.imgur.com/HLKphaH.jpg

[Rudy_Rozsnyai]

Format
Brand/Name: Alzor Style 020
Size: 18x10
Offset: +25
Spacer(s): None
Camber: -2 Front -3 Rear
Tires: Federal 595 225/35 R18
Suspension: TA Technic Coilovers
Spring Rates: 6k all around
Ride height: Low? lol I honestly don't know
Fender mods: Rolled in the Front, Nothing in the Rear
Rubbing: None
Brake Spec: Stock A4 Brakes

IMG_4468.JPG
IMG_4469.JPG
IMG_4472.JPG
IMG_4512.JPG
IMG_4513.JPG
IMG_4525.JPG
IMG_4528.JPG
IMG_4563.JPG

[A4 Quattro]

IMG_4468.JPG
IMG_4469.JPG
IMG_4472.JPG
IMG_4512.JPG
IMG_4513.JPG
IMG_4525.JPG
IMG_4528.JPG
IMG_4563.JPG

So close...

[Teh]

Brand/Name: BBS CH 009 - Powdercoated Blue Pearlescent
Size: 19 x 8.5
Offset: ET35
Spacer(s): N/A
Camber: N/A
Tires: 235 35 19 Michelin Pilot Super Sport
Suspension: Bilstein Eibach B12 Sportline Kit (50/40)
Spring Rates: N/A
Ride height: Settling :P
Fender mods: N/A
Rubbing: N/A
Brake Spec: EBC Grooved & Yellow Stuff Pads

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Woods_2.jpg

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Disused_Petrol_Station_2.jp g

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Disused_Petrol_Station_3.jp g

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Blacked_Grille.jpg

[ZERO FRAME GRAB]

NICCEEEEE!

[AvantNoir]

Brand/Name: BBS CH 009 - Powdercoated Blue Pearlescent
Size: 19 x 8.5
Offset: ET35
Spacer(s): N/A
Camber: N/A
Tires: 235 35 19 Michelin Pilot Super Sport
Suspension: Bilstein Eibach B12 Sportline Kit (50/40)
Spring Rates: N/A
Ride height: Settling :P
Fender mods: N/A
Rubbing: N/A
Brake Spec: EBC Grooved & Yellow Stuff Pads

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Woods_2.jpg

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Disused_Petrol_Station_2.jp g

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Disused_Petrol_Station_3.jp g

http://i203.photobucket.com/albums/aa265/High_tek_voodoo/A4_B6_Moro_Blue_BBS_CH_Blacked_Grille.jpg

Man that is a good looking avant!

[vwdann0]

Brand/Name: Avant Garde M580 satin silver
Size: 19"x9.5" Square
Offset: +35
Spacer(s): none (Last pic has 15mm spacers in the rear)
Camber: none
Tires: Nexxan N7000 235/35/19
Suspension: TEIN S.Tech Springs with B5 Front perches
Spring Rates: N/A
Ride height: Not Sure
Fender mods: None
Rubbing: None
Brake Spec: Stock

http://i65.tinypic.com/2yl06z5.jpg

http://i66.tinypic.com/24cttmc.jpg

http://i67.tinypic.com/23u1zs9.jpg

http://i63.tinypic.com/2qi0ifs.jpg

http://i66.tinypic.com/11j3ic5.jpg

With 15mm spacers in the rear

http://i65.tinypic.com/3589iz5.jpg

[storey618]

Brand/Name: elbrus i02
Size: 18x8
Offset: 42
Spacer(s): none
Camber: 2.5* front 1.2* rear
Tires: Dunlop direzza star spec 225 40 18
Suspension: st coilovers in front, neuspeed race springs rear
Spring Rates: ?
Ride height: ?
Fender mods: hand pulled in front
Rubbing: hard turns
Brake Spec: stock brakes

sorry pics are bad, ill update with better ones later

http://i1335.photobucket.com/albums/w665/storey618/CB6F2758-2E24-4850-8A1E-5A0E8A2983CC_zpshayfcvz8.jpg (http://s1335.photobucket.com/user/storey618/media/CB6F2758-2E24-4850-8A1E-5A0E8A2983CC_zpshayfcvz8.jpg.html)


http://i1335.photobucket.com/albums/w665/storey618/123AD60E-82D9-4A08-B88E-4C01FF041BD3_zpskt8qjjzh.jpg (http://s1335.photobucket.com/user/storey618/media/123AD60E-82D9-4A08-B88E-4C01FF041BD3_zpskt8qjjzh.jpg.html)

[Wahlstrom]

Brand/Name: BBS RS861 Speedline
Size: 8.5j x 19
Offset: 48
Spacer(s): nope
Camber: oem
Tires: 225/35-19 Nokian zLine
Suspension: Vogtland springs(coilovers soon)
Spring Rates: n/a
Ride height: 40/30ish
Fender mods: none
Rubbing: nope
Brake Spec: retrofitted S4 B6 front/rear

http://uploads.tapatalk-cdn.com/20160514/3f44323d9fb5034f2343715db9237f42.jpg
http://uploads.tapatalk-cdn.com/20160514/60383a260c042f00b35d17926d5e8501.jpghttp://uploads.tapatalk-cdn.com/20160514/1730032407197fa97908c07d71da8de4.jpghttp://uploads.tapatalk-cdn.com/20160514/6d95914ba133612066cf1905d6213388.jpg
http://uploads.tapatalk-cdn.com/20160514/9ae0223cfdfa1dc9b85e636d8ec0348b.jpghttp://uploads.tapatalk-cdn.com/20160514/2d1b2e6f9323a91bc2e8004fad6160f9.jpg
http://uploads.tapatalk-cdn.com/20160514/71f5050d17306c206e8eed1114adabd1.jpg

[alx.dub]

Brand/Name: Borbet RST
Size: 8.5 x 18
Offset: 35
Spacer(s): nope
Tires: 235/40/18 Vredestein Ultrac Cento
Suspension: ABT Coilovers
Rubbing: nope

http://s32.postimg.org/q4cqk2rnp/Full_Size_Render_1.jpg

[lucasharrington]

Brand/Name: bbs ck
Size: 18x8
Offset: 45
Spacer(s): 25mm adapter , Final et 20
Camber: stock
Tires: 215/30/18 Nankang ns-20
Suspension: air lift bags
Spring Rates: ?
Ride height: low
Fender mods: none
Rubbing: turning uphill
Brake Spec: stock brakes

http://i1265.photobucket.com/albums/jj518/lucasharringtonn/DSC_4601.jpg (http://s1265.photobucket.com/user/lucasharringtonn/media/DSC_4601.jpg.html)
http://i1265.photobucket.com/albums/jj518/lucasharringtonn/DSC_4525.jpg (http://s1265.photobucket.com/user/lucasharringtonn/media/DSC_4525.jpg.html)


Brand/Name: rotiform ind-t
Size: 18x9.5
Offset: 35
Spacer(s): none
Camber: stock
Tires: 225/40/18 Yokohama S.Drive
Suspension: air lift bags
Spring Rates: ?
Ride height: low
Fender mods: occasionally
Rubbing: turning uphill
Brake Spec: stock brakes

http://i1265.photobucket.com/albums/jj518/lucasharringtonn/DSC_4941.jpg (http://s1265.photobucket.com/user/lucasharringtonn/media/DSC_4941.jpg.html)
http://i1265.photobucket.com/albums/jj518/lucasharringtonn/DSC_4955.jpg (http://s1265.photobucket.com/user/lucasharringtonn/media/DSC_4955.jpg.html)
http://i1265.photobucket.com/albums/jj518/lucasharringtonn/DSC_4966.jpg (http://s1265.photobucket.com/user/lucasharringtonn/media/DSC_4966.jpg.html)

[Btns44]

Brand/Name: Rotiform SNA's powdercoated candy copper
Size: 19x10
Offset: 33
Tires: 225/35/19
Suspension: H&R Street Performance Coilovers

https://c7.staticflickr.com/8/7441/27155235022_a6ae8a5a93_c.jpg (https://flic.kr/p/HnBFih)DSC_0112 (https://flic.kr/p/HnBFih) by Drew Woodall (https://www.flickr.com/photos/138768274@N04/), on Flickr
https://c8.staticflickr.com/8/7275/27252290415_2e27c0eb30_c.jpg (https://flic.kr/p/Hwc7u8)DSC_0113 (https://flic.kr/p/Hwc7u8) by Drew Woodall (https://www.flickr.com/photos/138768274@N04/), on Flickr
https://c1.staticflickr.com/8/7702/27218538656_02bf53b0ca_c.jpg (https://flic.kr/p/Htd8gf)DSC_0103 (https://flic.kr/p/Htd8gf) by Drew Woodall (https://www.flickr.com/photos/138768274@N04/), on Flickr

[storey618]

Brand/name:alzor 881
Size: 18x9.5 all around
Offset: 40
Spacer(s): 5mm front. Total et35 front et40 rear
Camber: 2.5* front 1.2* rear
Tires: Dunlop direzza 225/40/18
Suspension: st coilovers front, neuspeed race springs rear
Spring rates:?
Ride height:?
Fender mods: hand pulled in front
Rubbing: hard turns
Brake spec: stock a4

http://i1335.photobucket.com/albums/w665/storey618/IMG_2664_zps7wdetxbp.jpg (http://s1335.photobucket.com/user/storey618/media/IMG_2664_zps7wdetxbp.jpg.html)

http://i1335.photobucket.com/albums/w665/storey618/83F241C3-3735-46B8-99F9-8CFB1936EA89_zpsgvgbtni8.jpg (http://s1335.photobucket.com/user/storey618/media/83F241C3-3735-46B8-99F9-8CFB1936EA89_zpsgvgbtni8.jpg.html)

http://i1335.photobucket.com/albums/w665/storey618/IMG_2672_zpsujalv8bu.jpg (http://s1335.photobucket.com/user/storey618/media/IMG_2672_zpsujalv8bu.jpg.html)

[Ephry73]

Brand/Name: Volk Racing TE37
Size: 19x8.5
Offset: ET36
Spacers: 3mm front, 7mm rear.
Final ET: 33 front, 29 rear.
Camber: -1.8 deg. front, -2.0 deg. rear.
Tires: Bridgestone Potenza S-03 Pole Position, 245/35-19 all around. (old)
Tires: Bridgestone Potenza RE050A Pole Position, 245/35-19 all around. (new)
Suspension: STaSIS/OHLINS SL (Signature Line), corner balanced.
Spring Rates: 650f / 1000r
Ride height: 24-3/4" front, 25" rear.
Fender mods: Lining with bolts removed.
Rubbing: None. (Some, with a dead hooker in the trunk)


http://www.audizine.com/gallery/data/502/IMG_0428.jpg

http://maxx.wolltech.com/IMG_0466.jpg

http://maxx.wolltech.com/IMG_0407.jpg

http://www.audizine.com/gallery/data/502/IMG_04451.jpg

http://maxx.wolltech.com/IMG_2807.jpg

http://maxx.wolltech.com/IMG_2814.jpg

http://maxx.wolltech.com/IMG_2314.jpg



Winter wheels: ASA AR2 18x8 (ET28 after spacers) with Bridgestone Blizzak LM-22 215/45-18 winter performance tires:

http://www.audizine.com/forum/attachment.php?attachmentid=10556

http://www.audizine.com/forum/attachment.php?attachmentid=10555

http://maxx.wolltech.com/IMG_1274.jpg

Love everything about this build

[280zx2by2]

Brand/Name: Work Equip 05
Size: 18x9.5j +30 18x11j +22
Spacer(s): None
Camber: None
Tires: Tiny
Suspension: Megan lowering springs
Fender mods: None
Rubbing: None



Yeah, rear is going to need some work.

http://i286.photobucket.com/albums/ll89/280zx2by2/C2CCBE4A-DC12-44B4-A823-0996DEC757A1.jpg
http://i286.photobucket.com/albums/ll89/280zx2by2/2EE2084B-7EA8-4570-8477-8ECE356D0FC5.jpg
http://i286.photobucket.com/albums/ll89/280zx2by2/546F0539-E542-426C-A484-E37637E49480.jpg

[storey618]

Brand/Name: Work Equip 05
Size: 18x9.5j +30 18x11j +22
Spacer(s): None
Camber: None
Tires: Tiny
Suspension: Megan lowering springs
Fender mods: None
Rubbing: None
Yeah, rear is going to need some work.


where did you get the lugs? ive been looking for quite some time. also this is fucking awesome!

[larry_fopps]

Brand/Name: VMR V710
Size: 19x8.5 ET 35 66.6 Center Bore
Spacer(s): None
Camber: 1.5 degree in the front (don't have adjustable upper control arms)
Tires: 235/35/19 Bridgestone Potenza 050a
Suspension: H&R Sport Springs Bilstein Sport Shocks
Fender mods: None
Rubbing: only the fender liners over large bumps.

Still need to find an OEM Center Cap that fits. I'll take more pictures tonight and add to this post.

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1682_zpsjihvjymn.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1682_zpsjihvjymn.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1727_zpsvpqjb5xo.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1727_zpsvpqjb5xo.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1726_zps5vwm2s1q.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1726_zps5vwm2s1q.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1724_zpsknd2zfbf.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1724_zpsknd2zfbf.jpg.html)

[Furly]

Brand/Name: Work Equip 05
Size: 18x9.5j +30 18x11j +22
Spacer(s): None
Camber: None
Tires: Tiny
Suspension: Megan lowering springs
Fender mods: None
Rubbing: None



Yeah, rear is going to need some work.

http://i286.photobucket.com/albums/ll89/280zx2by2/C2CCBE4A-DC12-44B4-A823-0996DEC757A1.jpg
http://i286.photobucket.com/albums/ll89/280zx2by2/2EE2084B-7EA8-4570-8477-8ECE356D0FC5.jpg
http://i286.photobucket.com/albums/ll89/280zx2by2/546F0539-E542-426C-A484-E37637E49480.jpg

https://i.ytimg.com/vi/n4BNJWBoO_E/maxresdefault.jpg

[280zx2by2]

where did you get the lugs? ive been looking for quite some time. also this is fucking awesome!



I actually took a trip to Japan a month or so ago and got them. Original plan was to build an e36, turned out to be perfect that I could get m14-m12 conversion studs then run a 5x114.3 wheel without adapters.

[280zx2by2]

https://i.ytimg.com/vi/n4BNJWBoO_E/maxresdefault.jpg

I guess the jack, tools, spare wheels weren't enough to clue in that this was a test fit? Haha I know you Audi guys are used to your cookie cutter wheel sizes, I'll try to do better. Jk I'm not.

[storey618]

I guess the jack, tools, spare wheels weren't enough to clue in that this was a test fit? Haha I know you Audi guys are used to your cookie cutter wheel sizes, I'll try to do better. Jk I'm not.

im pretty sure making fun of work wheels is a sin...especially when theyre fully polished.

[H8bumps]

Quote Originally Posted by 280zx2by2 View Post
I guess the jack, tools, spare wheels weren't enough to clue in that this was a test fit? Haha I know you Audi guys are used to your cookie cutter wheel sizes, I'll try to do better. Jk I'm not.


I got the impression that he was making fun of your sandals more than the wheels...

[280zx2by2]

I got the impression that he was making fun of your sandals more than the wheels...

No, he actually reposted my post in another section of the forum. I do apologize to him, it's just that I don't prefer to run cheap, heavy, cast Chinese made wheels like he does. Maybe one day I'll go back to being a 16 year old with my wheel choices, till then I'll just stick with a 16 year old's styling choices.

[mk2rimar]

http://uploads.tapatalk-cdn.com/20160624/549a66831d768cc5faa6644d632329f0.jpghttp://uploads.tapatalk-cdn.com/20160624/e05d2626478986ed8c760ec9c0859b40.jpghttp://uploads.tapatalk-cdn.com/20160624/1d3284c926db275845019ae194e03f26.jpg

Sent from my Nexus 5 using Tapatalk

[Furly]

No, he actually reposted my post in another section of the forum. I do apologize to him, it's just that I don't prefer to run cheap, heavy, cast Chinese made wheels like he does. Maybe one day I'll go back to being a 16 year old with my wheel choices, till then I'll just stick with a 16 year old's styling choices.

You got butthurt enough to creep through my post history like a weirdo. It's not the brand of wheel it's your incredibly horrid choice of fitment. What good are "quality wheels" if they stick out 3 inches like a Mexican lowrider? This is an audi not a Buick regal. And don't even get me started on the green spikes as your lug caps lmao.

What's under the hood ? I'm guessing a dusty ass stock 1.8T that's in dire need of maintnenance. This is what happens when an audi becomes 10+ years old and JDM kids get their hands on them.

[280zx2by2]

You got butthurt enough to creep through my post history like a weirdo. It's not the brand of wheel it's your incredibly horrid choice of fitment. What good are "quality wheels" if they stick out 3 inches like a Mexican lowrider? This is an audi not a Buick regal. And don't even get me started on the green spikes as your lug caps lmao.

What's under the hood ? I'm guessing a dusty ass stock 1.8T that's in dire need of maintnenance. This is what happens when an audi becomes 10+ years old and JDM kids get their hands on them.

Post history? Like your previous posts? Yeah, that's how I found your little wanker forum whore post. And I'm guessing I was right about you running $500 ebay specials on your car by you emotional status here.

And I know this is going to blow your very narrow mind but there are these thing that exist out in the world known as "flares." They are usually denounced in the car world but when you have a boring B6 that has practically no aftermarket support you make awesome things work so you don't look like a highschooler who bought a set of used wheels from a TT owner to put on his hand-me-down car, Or I could just buy proper lips for my wheels because unlike you, I have that option, but I'm not. Also, does it contribute even further to your emotional status that my aluminum lugs weigh less than the stock steel lugs you are almost certainly running?

And no, the car has a god forsaken 3.0, I can't do anything to this powertrain however till I move back to the States due to Italian law. Flipside of that is when I am back in the States, as a fabricator/machinist(including CNC)/welder I can put whatever engine in this car Id like. Its awesome having to not buy parts off ebay like some. [;)]

TL;DR...
A) I thought the internet stopped using "butthurt" like 5 years ago?
B) Your car sucks, as well as your attitude towards others' work.

[MurkyRivers_A4]

Post history? Like your previous posts? Yeah, that's how I found your little wanker forum whore post. And I'm guessing I was right about you running $500 ebay specials on your car by you emotional status here.

I check previous posts too. I may be stalker.....


And I know this is going to blow your very narrow mind but there are these thing that exist out in the world known as "flares." They are usually denounced in the car world but when you have a boring B6 that has practically no aftermarket support you make awesome things work so you don't look like a highschooler who bought a set of used wheels from a TT owner to put on his hand-me-down car, Or I could just buy proper lips for my wheels because unlike you, I have that option, but I'm not. Also, does it contribute even further to your emotional status that my aluminum lugs weigh less than the stock steel lugs you are almost certainly running?

Flares? Please, for the love of God, do not:
https://i.ytimg.com/vi/gAYCbs4vjzE/maxresdefault.jpg

Your wheels will, and do, look stupid on YOUR car. If you want them to sit nicely, without god awful flares, you would need something other than your ebay Megan Springs and then you will look like dis:
http://i52.tinypic.com/2n1x0yg.jpg


And no, the car has a god forsaken 3.0, I can't do anything to this powertrain however till I move back to the States due to Italian law. Flipside of that is when I am back in the States, as a fabricator/machinist(including CNC)/welder I can put whatever engine in this car Id like. Its awesome having to not buy parts off ebay like some. [;)]
You should research more. There are options that dont require all those skills. Also, curious to know where you ordered your Megan springs from.....


TL;DR...
A) I thought the internet stopped using "butthurt" like 5 years ago?
B) Your car sucks, as well as your attitude towards others' work.
I lold

Also, I am all about creativity and style but your canards/diffuser makes you LOOK like a racecar and are completely non functional. I mean, if that is what you are going for then more power to you but its comparative to a dude dressing as a chick to get attention....people will look then realize the truth, laugh, then move on.... IMHO of course.

[Furly]

Lol @ ebay parts. I'll let this kid keep thinking his home depot side skirt molding and mexi poke on a dusty 3.0 is dope.

https://i.ytimg.com/vi/fmMXIw0i024/hqdefault.jpg

[Charles.waite]

B) Your car sucks, as well as your attitude towards others' work.

Respect is earned, its not doled out because you "worked hard". Which you didn't by the way, you simply bolted some (ugly) shit on.

For the record, your car is bad and you should feel bad. Now grow up and learn to take criticism and negativity. Good lord...

[VMRWheels]

Brand/Name: VMR V710
Size: 19x8.5 ET 35 66.6 Center Bore
Spacer(s): None
Camber: 1.5 degree in the front (don't have adjustable upper control arms)
Tires: 235/35/19 Bridgestone Potenza 050a
Suspension: H&R Sport Springs Bilstein Sport Shocks
Fender mods: None
Rubbing: only the fender liners over large bumps.

Still need to find an OEM Center Cap that fits. I'll take more pictures tonight and add to this post.

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1682_zpsjihvjymn.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1682_zpsjihvjymn.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1727_zpsvpqjb5xo.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1727_zpsvpqjb5xo.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1726_zps5vwm2s1q.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1726_zps5vwm2s1q.jpg.html)

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1724_zpsknd2zfbf.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1724_zpsknd2zfbf.jpg.html)

you've come a long way! glad to see you still have it, looks great! [up]

[280zx2by2]

Flares? Please, for the love of God, do not:
https://i.ytimg.com/vi/gAYCbs4vjzE/maxresdefault.jpg

Your wheels will, and do, look stupid on YOUR car. If you want them to sit nicely, without god awful flares, you would need something other than your ebay Megan Springs and then you will look like dis:
http://i52.tinypic.com/2n1x0yg.jpg

You should research more. There are options that dont require all those skills. Also, curious to know where you ordered your Megan springs from.....



This doesn't look like "dis" and his offset is actually more aggressive.

http://www.slammedenuff.com/uploads/5/5/3/6/5536481/7005037_orig.jpg

And Im not sure where the previous owner got the springs from. Id imagine from an intelligent member of audizine selling up for something worth a damn.





Also, I am all about creativity and style but your canards/diffuser makes you LOOK like a racecar and are completely non functional. I mean, if that is what you are going for then more power to you but its comparative to a dude dressing as a chick to get attention....people will look then realize the truth, laugh, then move on.... IMHO of course.

This car is going to be a chick dressed like a dude (pretty sure that's the simile you were looking for, but analogies are hard) until I can be back in the land of the free, and I'm ok with that. Its the same as stormtrooper putting wheels on his car that are worse than stock. Of course these cars aren't racecars or fast, as much as many on this forum want to think and with that idea this thing is just going to be a weird overseas DD that I can take to Worthersee and make Europeans smile about because it isn't sitting on $500 wheels and can do a rwd burnout (if the clutch is worth a damn) Then when the time comes it will get stripped out and swapped into the transgendered SOB its not supposed to be.


Lol @ ebay parts. I'll let this kid keep thinking his home depot side skirt molding and mexi poke on a dusty 3.0 is dope.


Only thing dusty is your car sitting in the garage, but that's none of my business...


Respect is earned, its not doled out because you "worked hard". Which you didn't by the way, you simply bolted some (ugly) shit on.

For the record, your car is bad and you should feel bad. Now grow up and learn to take criticism and negativity. Good lord...

Respect is earned by mod lists that are limited to spark plug specs, coilover brand, and bolt on factory brake swap. Got it.

Also never mentioned I worked hard, hard work is spark plug swaps (if you could send me a write up on that it'd be awesome)

[Charles.waite]

Respect is earned by mod lists that are limited to spark plug specs, coilover brand, and bolt on factory brake swap. Got it.

Also never mentioned I worked hard, hard work is spark plug swaps (if you could send me a write up on that it'd be awesome)

Sick burn.

Joke's on you though since I no longer own my b6. I currently daily a bus pass and drive the b7 to get groceries. And the b7 is completely stock.

Also you keep conflating "things I've done to my car" with "earned respect" and "taste". You're mistaken.

Why I do know is I doubt anyone is going to look at my car and say, man that looks like shit. Doesn't matter if its stock or not.

[MurkyRivers_A4]

This doesn't look like "dis" and his offset is actually more aggressive.

http://www.slammedenuff.com/uploads/5/5/3/6/5536481/7005037_orig.jpg

And Im not sure where the previous owner got the springs from. Id imagine from an intelligent member of audizine selling up for something worth a damn.
Given your current mod list and goals, I dont think your car will ever look like that but what do I know.... please do find something in my post history for a witty retort.

Let me guess, the PO also bought the ebay front lip that you so proudly listed, the ebay front grill, the awesome 2 foot shifter because Japan is so very close to Italy. Did the PO also want to do a RWD conversion? Just curious



This car is going to be a chick dressed like a dude (pretty sure that's the simile you were looking for, but analogies are hard) until I can be back in the land of the free, and I'm ok with that. Its the same as stormtrooper putting wheels on his car that are worse than stock. Of course these cars aren't racecars or fast, as much as many on this forum want to think and with that idea this thing is just going to be a weird overseas DD that I can take to Worthersee and make Europeans smile about because it isn't sitting on $500 wheels and can do a rwd burnout (if the clutch is worth a damn) Then when the time comes it will get stripped out and swapped into the transgendered SOB its not supposed to be.

No, I really meant a dude dressed like a chick. I dont think anyone really worries about a girl dressing like a guy. Its whatever.

A stock 1.8 is not fast but has plenty of potential to be just that. If you do your research youll find that there are options for your 3.0 that dont consist of your 3.0.

I dont think Europeans will be smiling because its cool. I think they will be laughing at you especially when they realize that its your clutch thats creating all that smoke and your wheels aren't moving at all.

[Charles.waite]

Given your current mod list and goals, I dont think your car will ever look like that but what do I know.... please do find something in my post history for a witty retort.

Let me guess, the PO also bought the ebay front lip that you so proudly listed, the ebay front grill, the awesome 2 foot shifter because Japan is so very close to Italy. Did the PO also want to do a RWD conversion? Just curious



No, I really meant a dude dressed like a chick. I dont think anyone really worries about a girl dressing like a guy. Its whatever.

A stock 1.8 is not fast but has plenty of potential to be just that. If you do your research youll find that there are options for your 3.0 that dont consist of your 3.0.

I dont think Europeans will be smiling because its cool. I think they will be laughing at you especially when they realize that its your clutch thats creating all that smoke and your wheels aren't moving at all.

#squadgoals

[ginger_snaps]

http://uploads.tapatalk-cdn.com/20160624/a1141751c6624e3ab61262cc6bdcf258.jpg

I has 3 pieces wheels, can I be in the squad?

[MurkyRivers_A4]

I has 3 pieces wheels, can I be in the squad?

Pics for entry only...

[280zx2by2]

Sick burn.

Joke's on you though since I no longer own my b6.

Great joke.



I doubt anyone is going to look at my car.

Understandable.



Given your current mod list and goals, I dont think your car will ever look like that but what do I know.... please do find something in my post history for a witty retort.

Avatar will suffice.


Let me guess, the PO also bought the ebay front lip that you so proudly listed, the ebay front grill, the awesome 2 foot shifter because Japan is so very close to Italy. Did the PO also want to do a RWD conversion? Just curious

Yeah forgot about the Ebay lip, I actually don't mind that bit, the aero I like doesn't go well with the grandpa body lines of these cars at all so ill probably stick with it.

But stockish grill is on its way, 2ft shifter was my creation with 0 Japanese inspiration (that's old hot rodding culture, read a book ya goof), and I don't quite understand the last question, but ill try to answer. I dont think the gentleman even knew the car was AWD. Nardi wheel was also me (shameful I know, stock Audi steering wheel swaps are the shit)



A stock 1.8 is not fast but has plenty of potential to be just that. If you do your research youll find that there are options for your 3.0 that dont consist of your 3.0.

Agreed! I love AMBs! Helped a buddy build a 450hp one for a Corrado! Was wicked fast in a car that weighs 700-800lbs less! And we can both agree the 3.0 is garbage. Crazy.


I dont think Europeans will be smiling because its cool. I think they will be laughing at you especially when they realize that its your clutch thats creating all that smoke and your wheels aren't moving at all.

Ha that is awesome, the clutch is exactly what I was worried about, you beat me to it. Oh...


I has 3 pieces wheels, can I be in the squad?

New phone who dis?

[ginger_snaps]

Pics for entry only...

http://uploads.tapatalk-cdn.com/20160624/d8627acaa3e6ed42382c59acb822c7bb.jpg
http://uploads.tapatalk-cdn.com/20160624/e4a16404a520a06d07fad09508729553.jpg
http://uploads.tapatalk-cdn.com/20160624/b4fa58ff5d03bf6f6e38ec79a781484c.jpg

Only ones I has. Lol car is still being "built" over a very very long period. One day it'll see some sunshine. Posted them before. Just trying to get the thread back on track

[MurkyRivers_A4]

Understandable.

Avatar will suffice.

Yeah forgot about the Ebay lip, I actually don't mind that bit, the aero I like doesn't go well with the grandpa body lines of these cars at all so ill probably stick with it.

But stockish grill is on its way, 2ft shifter was my creation with 0 Japanese inspiration (that's old hot rodding culture, read a book ya goof), and I don't quite understand the last question, but ill try to answer. I dont think the gentleman even knew the car was AWD. Nardi wheel was also me (shameful I know, stock Audi steering wheel swaps are the shit)

Agreed! I love AMBs! Helped a buddy build a 450hp one for a Corrado! Was wicked fast in a car that weighs 700-800lbs less! And we can both agree the 3.0 is garbage. Crazy.

Ha that is awesome, the clutch is exactly what I was worried about, you beat me to it. Oh...


Looks like we saved another one... my job is done here.

[MurkyRivers_A4]

Only ones I has. Lol car is still being "built" over a very very long period. One day it'll see some sunshine. Posted them before. Just trying to get the thread back on track

Always looking forward to seeing a project back on the road. Throw some rubbers on those bad boys and give the details!

[A4 Quattro]

Hey guys, remember a couple pages ago when this used to be a no chatter thread? People could freely post wheel setups for others to look at. You'd never know if it was loved or hated, unless someone sent you a PM. And if someone made any sort of comment other than a wheel setup, it would be deleted in a matter of hours. Ah... the good old days.

[ginger_snaps]

http://uploads.tapatalk-cdn.com/20160624/4cf987219b6ecbc2fd4ef28c6158116c.jpg

[Furly]

This dude is talking shit about audi's, and the euro community but he's over here trying to turn his A4 into a civic [>_<]

Jokes on you breh.

[280zx2by2]

This dude is talking shit about audi's, and the euro community but he's over here trying to turn his A4 into a civic [>_<]

Jokes on you breh.

Only joke is you paying for wheels that are worse in every measurable aspect (and some subjective aspects) than your factory wheels.

Besides your car not running, that's a zinger too.





Hey guys, remember a couple pages ago when this used to be a no chatter thread? People could freely post wheel setups for others to look at. You'd never know if it was loved or hated, unless someone sent you a PM. And if someone made any sort of comment other than a wheel setup, it would be deleted in a matter of hours. Ah... the good old days.

I do apologize, I assumed due to a "senior member's" love of memes that it was anything goes.

[A4 Quattro]

I do apologize, I assumed due to a "senior member's" love of memes that it was anything goes.

You just need to learn to accept that not everyone loves the direction your car is going, and be able to accept it without starting internet drama.

[Furly]

Only joke is you paying for wheels that are worse in every measurable aspect (and some subjective aspects) than your factory wheels.

Besides your car not running, that's a zinger too.






I do apologize, I assumed due to a "senior member's" love of memes that it was anything goes.

Do you even know what wheels I have ? Have you even see my car?
Do you know why it's not running ? You're an idiot man. You're gonna keep getting roasted. Skinny jeans wearing, dildo shift knob having, vape pen smoking ass lol.

My engine build cost more than any car you've ever owned. Some ugly ass jdm wheels don't impress me.

If you dislike your audi so much and hate on the euro community, why did you buy one and try to "mod it" and come on audizine. ? Foh

[280zx2by2]

You just need to learn to accept that not everyone loves the direction your car is going, and be able to accept it without starting internet drama.

So stand idly by as others voice their opinions in a thread that's simply to help and inform others? Got it, love the logic.

[Furly]

http://i286.photobucket.com/albums/ll89/280zx2by2/0973CD9E-2CB1-4406-ABAC-0789D1EA5A74.jpg

http://i286.photobucket.com/albums/ll89/280zx2by2/9A291D4E-68D0-4C02-9117-E389D8C25F2B.jpg

Your pics speak for themselves

Now kindly have a seat on that awesome shift knob of yours

[280zx2by2]

Do you even know what wheels I have ? Have you even see my car?
Do you know why it's not running ? You're an idiot man. You're gonna keep getting roasted. Skinny jeans wearing, dildo shift knob having, vape pen smoking ass lol.

My engine build cost more than any car you've ever owned. Some ugly ass jdm wheels don't impress me.

If you dislike your audi so much and hate on the euro community, why did you buy one and try to "mod it" and come on audizine. ? Foh
Don't need to have seen your car, I can tell by the mannerisms you use and your strong opinion of a couple pictures with no background info on them. Although I did kind of depict you as a skinny jeans, vape, ear ring wearing, DC Shoes, Monster Energy, hipster guy so maybe I am wrong about your wheels. And I'd love to see your build! I'm sure it's nothing I haven't seen before and will be surprised if it lasts through break in but yeah I'm sure it's cool and expensive!

And I bought an Audi because there aren't many options available in Italy, especially capable of importation back to the states. And I came here for the classifieds, haven't had enough posts (I'm guessing) to have all of my account features unlocked so here I am, and I do thank you for helping me get my post count up.

[Charles.waite]

Oh noes! People won't look at my car? I wanna be breaking necks doe....

[Noma12vA4]

Don't need to have seen your car, I can tell by the mannerisms you use and your strong opinion of a couple pictures with no background info on them. Although I did kind of depict you as a skinny jeans, vape, ear ring wearing, DC Shoes, Monster Energy, hipster guy so maybe I am wrong about your wheels. And I'd love to see your build! I'm sure it's nothing I haven't seen before and will be surprised if it lasts through break in but yeah I'm sure it's cool and expensive!

And I bought an Audi because there aren't many options available in Italy, especially capable of importation back to the states. And I came here for the classifieds, haven't had enough posts (I'm guessing) to have all of my account features unlocked so here I am, and I do thank you for helping me get my post count up.

Damn man, so much hostility over the opinions of strangers! IMO you shouldn't feel the need to justify your choices in mods, style, or the direction you want to take YOUR car. You joined AZ like a week ago, threw up some pics of your stancebro'ed a4, and now feel insulted by some constructive criticism from an old/well-versed enthusiast community? If you truly like the way your car looks, all the power to you, but I personally am not digging the look. Be proud of your ride, do what you think looks good, not what the 'scene' gives you points for.

Grandpa lines? Comon... the design of the b6 was definitely ahead of its time for being a 12-14yo car.

Look at the bright side though, if you are racing someone in your slow ass 3.0, you can hit'em with a spyhunter maneuver and shred their tires with those dope spikes FTW!

https://d.gr-assets.com/hostedimages/1431883384ra/14878329.gif

[280zx2by2]

Damn man, so much hostility over the opinions of strangers! IMO you shouldn't feel the need to justify your choices in mods, style, or the direction you want to take YOUR car. You joined AZ like a week ago, threw up some pics of your stancebro'ed a4, and now feel insulted by some constructive criticism from an old/well-versed enthusiast community? If you truly like the way your car looks, all the power to you, but I personally am not digging the look. Be proud of your ride, do what you think looks good, not what the 'scene' gives you points for.

Grandpa lines? Comon... the design of the b6 was definitely ahead of its time for being a 12-14yo car.

Look at the bright side though, if you are racing someone in your slow ass 3.0, you can hit'em with a spyhunter maneuver and shred their tires with those dope spikes FTW!

https://d.gr-assets.com/hostedimages/1431883384ra/14878329.gif

Not upset about the dislike, that is damn sure expected. It's that this fucking dude wants to be a critic in a thread that's meant to help people out (so if they don't plan on getting over fenders not to buy 11j +22) I fully expect all of this to be deleted but had to have a go at meme lord for his bumbass wheels first.

[WokkerK]

You helped me out...by showing me what not to buy.

[Furly]

Let's keep this thread going.

My new setup:

https://motherhoodhonestly.files.wordpress.com/2014/08/chariot-spikes.jpg
Specs:

17x20 ET8
No spacers
No fender mods no rubbing

[280zx2by2]

You helped me out...by showing me what not to buy. What you need to not buy is more cheeseburgers big boy!

[Furly]

Shots fired










And they missed

[280zx2by2]

I know, it's hard to keep up with this shit on a phone but I'm gonna try.

[Charles.waite]

Personal attacks are always fun.

But yes, you're clearly not taking this personally at all.

[WokkerK]

What you need to not buy is more cheeseburgers big boy!

Awwww you called me fat. Haven't heard that one before.

[Furly]

http://www.drivingenthusiast.net/sec-blog/images/2008/07/04/4.jpg

17x14 ET10
Eventually going to bolt on some plastic fenders and drill a bunch of holes in my car.

I had to remove the fender liner so it doesn't rub.

If you try to race me I'll shred your tires

[280zx2by2]

Awwww you called me fat. Haven't heard that one before.

There's fat joke somewhere in this about not hearing anything over the sound of yourself chewing but I'll refrain from such vile behavior.

[Furly]

The wheel thread is from 2009 and has never been this active :)

[WokkerK]

The reason why I don't like your car is I'm too fat to fit in it. Your car makes me so sad that I need to go eat my feelings now.

[280zx2by2]

The reason why I don't like your car is I'm too fat to fit in it. Your car makes me so sad that I need to go eat my feelings now.
Don't patronize me with your fake salty, charbroiled, special sauce, extra onions, tears...

[ginger_snaps]

http://uploads.tapatalk-cdn.com/20160624/7d654531846af347717f70de8dee5509.jpg

[WokkerK]

I'm so fat my gas mileage suffers with all the extra weight.

[280zx2by2]

I'm so fat my gas mileage suffers with all the extra weight.

Do Sedans get slightly better gas mileage? if so you're probably just looking at sedan mpg, that's all. Please keep us updated.

[MurkyRivers_A4]

Poor little enlisted Air Force machinist Jordan Chase Barfield using government tools and material to make car parts for his car.

I guess I would be butt hurt too if I chose that branch of the military.....

I can now understand the mindset behind the direction of your car since all of what you have owned has been japanese, including your stolen Honda civic, aside from the Lupo with sweet coilovers. Oh looks like I forgot the E46.

Japanese drift scene does not apply to Audi cars. Im sorry, it just doesnt work.

Fits fine in the S13 though:
http://uploads.tapatalk-cdn.com/20160625/e83725fb3bb4ea5fa87033af54c5938d.jpg

Does this bring tears:
http://i286.photobucket.com/albums/ll89/280zx2by2/4CA8D14B-9733-49FA-AB97-EA628212B779.jpg (http://s286.photobucket.com/user/280zx2by2/media/4CA8D14B-9733-49FA-AB97-EA628212B779.jpg.html)

[280zx2by2]

Poor little enlisted Air Force machinist Jordan Chase Barfield using government tools and material to make car parts for his car.

I guess I would be butt hurt too if I chose that branch of the military.....

I can now understand the mindset behind the direction of your car since all of what you have owned has been japanese, including your stolen Honda civic, aside from the Lupo with sweet coilovers. Oh looks like I forgot the E46.

Japanese drift scene does not apply to Audi cars. Im sorry, it just doesnt work.

Does this bring tears:
http://i286.photobucket.com/albums/ll89/280zx2by2/4CA8D14B-9733-49FA-AB97-EA628212B779.jpg (http://s286.photobucket.com/user/280zx2by2/media/4CA8D14B-9733-49FA-AB97-EA628212B779.jpg.html)
K
Honestly, who steals a D15 auto civic? Trumps gonna build a wall though so....

But yeah, 280zx, about 8 different S13 chassis before I was 19 so I'm kind of biased towards a certain style, don't really care about the chassis though.

[MurkyRivers_A4]

K
Honestly, who steals a D15 auto civic? Trumps gonna build a wall though so....

But yeah, 280zx, about 8 different S13 chassis before I was 19 so I'm kind of biased towards a certain style, don't really care about the chassis though.
Lets bring you back over here where you belong.

Any theif steals a Honda. Regardless of race. They are very easy to steal and are the highest stolen vehicles anywhere.

The real question is, who the hell mods a d15 auto trans civic????

Oh thats right, this guy does.
http://uploads.tapatalk-cdn.com/20160625/bca78bddddc18b02925ec96df3b10e2c.jpg

[tchuck]

This creepy little pony under my recliner is better than anything that's happened here since the nooblet showed up.
.
http://uploads.tapatalk-cdn.com/20160625/024febbf59527b4ef4120907d9e69ca6.jpg

[MurkyRivers_A4]

Thats pretty damn creepy. That eye, its.... staring.....

[MurkyRivers_A4]

Lmao..
http://uploads.tapatalk-cdn.com/20160625/6fb8d03c0dd949cef49dfa6022db8a5d.jpg

[larry_fopps]

Wow this got out of hand.

[MurkyRivers_A4]

Wow this got out of hand.
But at least its back from the dead.... granted not for the right reasons

[WokkerK]

Thats pretty damn creepy. That eye, its.... staring.....

Only eyes I like staring at me are brown eyes...

[Furly]

Lmao..
http://uploads.tapatalk-cdn.com/20160625/6fb8d03c0dd949cef49dfa6022db8a5d.jpg

He followed me too. I don't mind :)

- - - Updated - - -


But at least its back from the dead.... granted not for the right reasons

It was entertainment and laughs for the day. No harm no foul

[ginger_snaps]

This is getting like Reddit. I like it.

[ryanhmusic]

aww why'd this have to go and fizzle out so soon? It was just starting to get exciting.

[MurkyRivers_A4]

Hes in Italy and is more than likely asleep. Should kick off tomorrow.....

[Rabbit]

More crying and hatin' on Audis...

[ryanhmusic]

Hes in Italy and is more than likely asleep. Should kick off tomorrow.....

But its already 6am! Dude should be up and enjoying the day!

[MurkyRivers_A4]

But its already 6am! Dude should be up and enjoying the day!
True, or at least starting his Saturday morning cartoons.

[280zx2by2]

Lets bring you back over here where you belong.

Any theif steals a Honda. Regardless of race. They are very easy to steal and are the highest stolen vehicles anywhere.

The real question is, who the hell mods a d15 auto trans civic????

Oh thats right, this guy does.

Yep, Yakima rails and a basket, sick modz m8.

But I work a swing shift, If I wasn't going to help a friend install some coilovers and ruin an e36 I wouldn't have been up for another 3-4 hours.

[ginger_snaps]

Just like to say Yakima rails are probably a good $300+ so making fun of such a thing so stupid can be disappointing. Sometimes the basic mods are the most $$$. Ask me how I know.... My whispbars cost me quite a bit.

[tchuck]

Thats pretty damn creepy. That eye, its.... staring.....
Right???
.
http://uploads.tapatalk-cdn.com/20160625/18360751c6f341aa4bd78978ef1d9621.jpg

[Let it snow]

This is the only application that spiked wheels are a good idea.




https://youtu.be/frE9rXnaHpE?t=1m28s

[ginger_snaps]

http://uploads.tapatalk-cdn.com/20160625/eee4bb5c20db61ddf69391a823231c04.jpg

[Furly]

This is the only application that spiked wheels are a good idea.




https://youtu.be/frE9rXnaHpE?t=1m28s

[>_<][>_<]

[TheDaver A4]

I thought this was a wheel thread...whats all this bullshit on here???

[ginger_snaps]

I thought this was a wheel thread...whats all this bullshit on here???

I'm just here for the pony on pony action.

[MurkyRivers_A4]

Wheelshttp://uploads.tapatalk-cdn.com/20160627/7cb78b75d1682ef2fe683c6519163c2f.jpg

[Furly]

I thought this was a wheel thread...whats all this bullshit on here???

A wheel thread that had almost zero activity for like 8 years until now [>_<]

[tchuck]

I'm just here for the pony on pony action.
I'd give you another pic if I knew where the damn thing went.
.
http://uploads.tapatalk-cdn.com/20160627/4c67e984daaeb8ed2173879f0b63cb78.gif

[Pr1ce]

I thought this was a wheel thread...whats all this bullshit on here???


A wheel thread that had almost zero activity for like 8 years until now [>_<]


thedaver been on here like 3 months and getting in his feelings.


Now show me more pony damnit
Furly you are correct and this is awesome.

[larry_fopps]

In an attempt to steer this back on topic and prevent a thread lock,

http://i29.photobucket.com/albums/c277/lf22/B6%20Avant/IMAG1737_zpsgwnutkix.jpg (http://s29.photobucket.com/user/lf22/media/B6%20Avant/IMAG1737_zpsgwnutkix.jpg.html)

[A4 Quattro]

Did someone say wheels? I gotta get back into this thread.

http://i.imgur.com/UlQWE26.jpg

[Ephry73]

I feel responsible [emoji53]


Sent from my iPhone using Tapatalk

[MurkyRivers_A4]

I feel responsible [emoji53]


Sent from my iPhone using Tapatalk

Whoa whoa, dont go taking all the credit....

[tchuck]

Post-drama format refresher:

Format
Brand/Name: Sparco Assetto Gara
Size: 18x8
Offset: 48
Spacer(s): 10mm F&R
Camber: stock range
Tires: Bridgestone Re970as 225/40/18
Suspension: BC Racing BR coilovers
Spring Rates: 10kg/mm F&R
Ride height: 25ish ftg (Yolo ride height)
Fender mods: none required for this setup
Rubbing: Zero. Point. Zero.
Brake Spec: Stock b6 1.8t size, slotted rotors
.
http://uploads.tapatalk-cdn.com/20160627/3040ad30bac523ea831e218bd3afa963.jpg


**the reverse rake is from my slanted driveway. Its actually a bit lower in the front than the back to equalize the fender to hub distances front to back.

[Ephry73]

Whoa whoa, dont go taking all the credit....

Lol


Sent from my iPhone using Tapatalk

[Stig's_Cousin]

Brand/Name: BBS RE 877
Size: 18x9
Offset: 38
Spacer(s): None
Camber: No change
Tires: Continental DWS 235/40/18
Suspension: KSport Kontrol Pro
Fender mods: None
Rubbing: None
Brake Spec: Stock

Original color:
http://i.imgur.com/6gAr9Vw.jpg

http://i.imgur.com/zSaiSxT.jpg

Decided to respray myself and swapped to Nankang tires (shit)

Also moved to Cayenne brakes.

Loved it out of the booth:

http://i.imgur.com/LseNIDU.jpg

Hated it on the car:

http://i.imgur.com/TShPDIF.jpg

Painted one more time, but moved it to my wife's Tiguan:
I'm not pleased with how I applied the paint, but from a few feet away they look good.

http://i.imgur.com/FhA1EpL.jpg
http://i.imgur.com/UG8VeU7.jpg

Brand/Name: Rays VR C345 Ultra Light
Size: 17x8
Offset: Don't remember
Spacer(s): 5mm front
Camber: No change
Tires: BFG Comp2 235/45/17
No suspension changes, but added sport lip

Came in pressed black:

http://i.imgur.com/uZTAvrA.jpg

Thought about polishing:

http://i.imgur.com/0qwFdA4.jpg

Then decided that was too much work so I stripped them, and painted them to match the BBS set:

http://i.imgur.com/X5M0PLK.jpg

Also not pleased with this paint job up close, but at this point I never want to refinish a wheel again.

http://i.imgur.com/ZogVNzv.jpg

http://i.imgur.com/VLJVk7o.jpg

Bonus - 4 different wheels at one time. I needed to roll it out of the shop while I painted.

http://i.imgur.com/5RU83TD.jpg

http://i.imgur.com/0XzxXmf.jpg

[TheDaver A4]

thedaver been on here like 3 months and getting in his feelings.


Now show me more pony damnit
Furly you are correct and this is awesome.
I think I was annoyed that day
http://uploads.tapatalk-cdn.com/20160912/ec279b5894e88751e6ad802fd1f21db8.gif
I needed a snickers

Sent from my LG-H811 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[TheDaver A4]

Anyway, Back to this thread...
Im considering this the "Classic" look since its been done so many times. Still sick tho.

Format
Brand/Name: Alzor 881
Size:18x8.5 Front and Back
Offset:None
Spacer(s):None
Camber: Cant find that darn spec sheet.
Tires: Falken ZE950
Suspension: ST Coil-overs
Spring Rates:
Ride height: Front 24.25/ Rear 24.50
Fender mods:None
Rubbing: Not Really
Brake Spec: Stock

http://www.audizine.com/gallery/data/502/Audi_wheels_1_1_.jpg

http://www.audizine.com/gallery/data/500/Audi_wheels_rear.jpg

http://www.audizine.com/gallery/data/502/Audi_wheels_3_1_.jpg
Apparently I like the drivers side of my car a lot.

[Valencia723]

Hey would someone kindly help me out?

I have a 2002 Audi a4

My boy is giving me tires and the specs are 245/40R-19 Bridgestone Blizzak LM-60 and 275/35R-19 Bridgestone Blizzak LM-60

will these fit on my car if i get 19 inch rims?

[2K1Quattro]

Hey would someone kindly help me out?

I have a 2002 Audi a4

My boy is giving me tires and the specs are 245/40R-19 Bridgestone Blizzak LM-60 and 275/35R-19 Bridgestone Blizzak LM-60

will these fit on my car if i get 19 inch rims?

Sorry to say but WAY to big for your car. I am running 235/35ZR19's and rub occasionally due to ride height.

[bigab24]

I might be right here. Is anybody selling A4 B6 USP rims or S4 Avus rims?

[MNAudi101]

This thread is meant for no chit chat, the rules have been posted before on the first page and later pages. Keep this thread to information about current or past wheel sets and pictures. If you have a question or would like to give kudos to someone else send them a PM or there are other threads for questions.

Here is the format people should be using for this thread:

Format
Brand/Name:
Size:
Offset:
Spacer(s):
Camber:
Tires:
Suspension:
Spring Rates:
Ride height:
Fender mods:
Rubbing:
Brake Spec:

[Dappa01]

Brand/Name: rep
Size: 19X8
Offset: 40Et
Spacer(s): 3mm front 10mm rear
Camber: factory spec
Tires: 235/35 19 Goodyear GT
Suspension: Neuspeed sport spring 1.5 drop all around and Bilstein sprot shocks
Spring Rates:
Ride height: 24.25 inch all around from the ground
Fender mods: none
Rubbing: none
Brake Spec: B7 a4 front brakes, stock B6 rear brakes.

http://i64.tinypic.com/w70oht.jpg

http://i64.tinypic.com/1629lyo.jpg
http://i67.tinypic.com/2iqb9es.jpg
http://i68.tinypic.com/2589fyp.jpg
http://i65.tinypic.com/28ilpo0.jpg

http://i64.tinypic.com/28lq2dh.jpg

http://i67.tinypic.com/r1g4lu.jpg

[VenomGT9]

Brand/Name: OEM A7
Size: 19x8.5
Offset: 32
Spacer(s): none
Camber: -1.2
Tires: 235/35/19 Conti 5P
Suspension: sport stock
Fender mods: none
Rubbing: none
http://i68.tinypic.com/dzy1rd.jpg

[MurkyRivers_A4]

Brand/Name: OEM S5 Peelers
Size: 19x9
Offset: 33
Spacer(s): none
Camber: No Clue
Tires: 235/35/19 Hankook Ventus
Suspension: JOM Blue Line Coilovers
Fender mods: none yet
Rubbing: yes on rear drivers side. Pretty sure its my subframe being out of alignment but will roll fenders for temp fix.

http://uploads.tapatalk-cdn.com/20161107/e44dcae32db5dd3d782e8e43b350d964.jpg

[waf12]

Can I use this setup: 9X19 H2 ET29 of my B6 ? This is the code : 4F0601025BQ

without camber, and with 235x35x19 tyres?

[itsmatt33]

Can I use this setup: 9X19 H2 ET29 of my B6 ? This is the code : 4F0601025BQ

without camber, and with 235x35x19 tyres?

without camber hell no.

[Ephry73]

Brand/Name: Volk Racing TE37
Size: 19x8.5
Offset: ET36
Spacers: 3mm front, 7mm rear.
Final ET: 33 front, 29 rear.
Camber: -1.8 deg. front, -2.0 deg. rear.
Tires: Bridgestone Potenza S-03 Pole Position, 245/35-19 all around. (old)
Tires: Bridgestone Potenza RE050A Pole Position, 245/35-19 all around. (new)
Suspension: STaSIS/OHLINS SL (Signature Line), corner balanced.
Spring Rates: 650f / 1000r
Ride height: 24-3/4" front, 25" rear.
Fender mods: Lining with bolts removed.
Rubbing: None. (Some, with a dead hooker in the trunk)


http://www.audizine.com/gallery/data/502/IMG_0428.jpg

http://maxx.wolltech.com/IMG_0466.jpg

http://maxx.wolltech.com/IMG_0407.jpg

http://www.audizine.com/gallery/data/502/IMG_04451.jpg

http://maxx.wolltech.com/IMG_2807.jpg

http://maxx.wolltech.com/IMG_2814.jpg

http://maxx.wolltech.com/IMG_2314.jpg



Winter wheels: ASA AR2 18x8 (ET28 after spacers) with Bridgestone Blizzak LM-22 215/45-18 winter performance tires:

http://www.audizine.com/forum/attachment.php?attachmentid=10556

http://www.audizine.com/forum/attachment.php?attachmentid=10555

http://maxx.wolltech.com/IMG_1274.jpg

Still loving this


Sent from my iPhone using Tapatalk

[JUSADUB]

Brand/Name: Work Meister S1 3P
Size: 18x9
Offset: 35
Spacer(s): none
Camber: negative
Tires: 215/40/18 Nankang As-1
Suspension: Solo werks
Spring Rates:
Ride height: 24'' front 24 1/4 rear
Fender mods: rolled
Rubbing: yes
Brake Spec: stock

http://i2.photobucket.com/albums/y48/VTECDA21/Mobile%20Uploads/FullSizeR_zps2brrpwrf.jpg (http://s2.photobucket.com/user/VTECDA21/media/Mobile%20Uploads/FullSizeR_zps2brrpwrf.jpg.html)
http://i2.photobucket.com/albums/y48/VTECDA21/Mobile%20Uploads/FullSizeR_zpsc45b3vps.jpg (http://s2.photobucket.com/user/VTECDA21/media/Mobile%20Uploads/FullSizeR_zpsc45b3vps.jpg.html)

[JUSADUB]

Brand/Name: Avant Garde M240
Size: 18x9
Offset: 35 et25 final
Spacer(s): 10mm
Camber: negative
Tires: 225/40/18 Nankang As-1
Suspension: Solo werks
Spring Rates:
Ride height: 24'' front 24 1/4 rear
Fender mods: rolled
Rubbing: yes
Brake Spec: stock

http://i2.photobucket.com/albums/y48/VTECDA21/Mobile%20Uploads/IMG_0314_zpskm6zsruc.jpg (http://s2.photobucket.com/user/VTECDA21/media/Mobile%20Uploads/IMG_0314_zpskm6zsruc.jpg.html)
http://i2.photobucket.com/albums/y48/VTECDA21/Mobile%20Uploads/IMG_0319_zpsrfceaspj.jpg (http://s2.photobucket.com/user/VTECDA21/media/Mobile%20Uploads/IMG_0319_zpsrfceaspj.jpg.html)
http://i2.photobucket.com/albums/y48/VTECDA21/Mobile%20Uploads/IMG_0320_zps4luqtfxg.jpg (http://s2.photobucket.com/user/VTECDA21/media/Mobile%20Uploads/IMG_0320_zps4luqtfxg.jpg.html)

[oaybar007]

Brand/Name: OZ Ultraleggera
Size: 18x8
Offset: 35
Spacer(s): None
Camber: Stock (-1.2 fronts)
Tires: Pirelli P Zero All Season Plus (Revised compound 2017) 235/40 18
Suspension: Stock sport suspension (2004)
Spring Rates: N/A
Ride height: N/A
Fender mods: None
Rubbing: None. Screws in fender liner still present.
Brake Spec: ECS Slotted 288mm front & 245mm rear with Hawk HPS pads.

http://i267.photobucket.com/albums/ii293/oaybar007/uspoz_zpsgql9kmcs.jpg

[jedrekx]

Brand/Name: BBS Speedline OEM
Size: 19x8,5"
Offset: 48
Spacer(s): 20mm front, 25 mm rear
Camber: No change
Tires: Federal SS595 215/35/19
Suspension: FK-Automotive coilover AK Street

http://i68.tinypic.com/30k54bd.jpg

[ginger_snaps]

Brand/Name: BBS Speedline OEM
Size: 19x8,5"
Offset: 48
Spacer(s): 20mm front, 25 mm rear
Camber: No change
Tires: Federal SS595 215/35/19
Suspension: FK-Automotive coilover AK Street

http://i68.tinypic.com/30k54bd.jpg

[emoji7][emoji7]love it

[A4 Quattro]

Just a little test fit teaser.

Brand/Name: Rotiform INDT
Size: 18x9.5
Offset: 25
Spacer(s): None yet, will eventually add some to the front
Camber: Not adjusted yet. Planning on running lowest possible, expecting -2.5° or thereabouts.
Tires: 215/35 Nankangs
Suspension: Airlift Performance bags
Spring Rates: What's a spring?
Ride height: Not even low
Fender mods: None yet
Rubbing: None yet
Brake Spec: Stock AF

http://files.utahaudination.com/Audi/B6/bootyindt1PS.jpg

http://files.utahaudination.com/Audi/B6/testfitteaser.jpg

[Adamwagg]

That is pure lush any more pics

Sent from my E5823 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Ephry73]

I may have to dip my car for sure


Sent from my iPhone using Tapatalk

[Ephry73]

Just a little test fit teaser.

Brand/Name: Rotiform INDT
Size: 18x9.5
Offset: 25
Spacer(s): None yet, will eventually add some to the front
Camber: Not adjusted yet. Planning on running lowest possible, expecting -2.5° or thereabouts.
Tires: 215/35 Nankangs
Suspension: Airlift Performance bags
Spring Rates: What's a spring?
Ride height: Not even low
Fender mods: None yet
Rubbing: None yet
Brake Spec: Stock AF

http://files.utahaudination.com/Audi/B6/bootyindt1PS.jpg

http://files.utahaudination.com/Audi/B6/testfitteaser.jpg

What color mix is the dip? Or is that a wrap?


Sent from my iPhone using Tapatalk

[Midnightblkb5]

https://uploads.tapatalk-cdn.com/20170218/be7a470a78305c478ffb4c6970d34006.jpg
haa ill play 20x9.5 20x10.5


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)https://uploads.tapatalk-cdn.com/20170218/75e5f2c96db097f4e49812bfbc3bf097.jpg

[A4 Quattro]

That is pure lush any more pics

Sent from my E5823 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)


I may have to dip my car for sure


Sent from my iPhone using Tapatalk


What color mix is the dip? Or is that a wrap?


Sent from my iPhone using Tapatalk

It's a wrap. 3M Matte Dark Grey.

Also, here's another couple shots since you asked for moar, Adam.

http://i.imgur.com/WhOz8Lg.jpg

http://i.imgur.com/n5RnUPG.jpg
Shameless Instagram plug --> @nic.beesix (https://www.instagram.com/nic.beesix/)

[Adamwagg]

It's a wrap. 3M Matte Dark Grey.

Also, here's another couple shots since you asked for moar, Adam.

http://i.imgur.com/WhOz8Lg.jpg

http://i.imgur.com/n5RnUPG.jpg
Shameless Instagram plug --> @nic.beesix (https://www.instagram.com/nic.beesix/)
Cheers mate I love it I think it's the best A4 Ive seen

Sent from my E5823 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[storey618]

Brand/Name: alzor 803
Size: 17x9
Offset: 35
Spacer(s): none
Camber: stock rear, 2.7 or something up front
Tires: 215/45 Nankangs
Suspension: coilovers, and neuspeed race springs
Spring Rates: ?
Ride height: 23 1/2" front, 24" rear
Fender mods: rolled
Rubbing: None
Brake Spec: Stock

http://i1335.photobucket.com/albums/w665/storey618/image1_zpswlwcim2m.jpg (http://s1335.photobucket.com/user/storey618/media/image1_zpswlwcim2m.jpg.html)

http://i1335.photobucket.com/albums/w665/storey618/7A00CABC-8BE0-4F61-AEDF-C9CE629D6A7C_zps6djpjiqy.jpg (http://s1335.photobucket.com/user/storey618/media/7A00CABC-8BE0-4F61-AEDF-C9CE629D6A7C_zps6djpjiqy.jpg.html)

[NiklasStrom]

Brand/Name: OEM Audi BBS Speedline
Size: 19x9
Offset: ET33
Spacer(s): None
Camber: Some, but will be none soon (maybe).
Tires: Astresso ZSR 235/35ZR19
Suspension: FK Automotive coilover AK Street

Just testfitting them as i just bought them 3 hours ago, could not resist it.

I am getting a wheel alignment next week as the camber got changed when i adjusted my coilovers.

https://uploads.tapatalk-cdn.com/20170303/a1aecd29e957cb9382a5e761049fb392.jpg

https://uploads.tapatalk-cdn.com/20170303/2fb97aa915a79038a6fc9ed93aee14c5.jpg

https://uploads.tapatalk-cdn.com/20170303/a0a902a05c51a80d620548489986f4fb.jpg

[19jdog]

New wheels installed today. Rohana RC7. 19x9.5 32mm https://uploads.tapatalk-cdn.com/20170312/0ea0ad3c7b367ac7313d065581dc14fd.jpghttps://uploads.tapatalk-cdn.com/20170312/dbbaa8c3c9b90ebf8f44ddb15b6624ba.jpghttps://uploads.tapatalk-cdn.com/20170312/506b494a1d7be1ed49f34aa452de702e.jpg

[Luxus Panzer]

Anyone got a pic of a B6 at stock ride height with bigger tires used to take up the wheel gap?

I am curious how it looks.

[Jakal]

Brand/Name: BBS Speedline OEM
Size: 19x8,5"
Offset: 48
Spacer(s): 20mm front, 25 mm rear
Camber: No change
Tires: Federal SS595 215/35/19
Suspension: FK-Automotive coilover AK Street

http://i68.tinypic.com/30k54bd.jpg

Please, more pics of this car. [drool]

[Doubleredrolex]

Brand/Name: MMR HR2
Size: 20x8.5
Offset: 35
Spacer(s): none installed but I have 5mm for rear.
Camber: stock
Tires: 235/30R20
Suspension: OEM s4 sport with B5 front perches
Spring Rates:
Ride height:
Fender mods: screw removed.
Rubbing: no

I need to lower it more. Coilovers soon.

http://imagizer.imageshack.us/v2/150x100q90/923/IRn1K6.jpg (https://imageshack.com/i/pnIRn1K6j)

[Ephry73]

It's a wrap. 3M Matte Dark Grey.

Also, here's another couple shots since you asked for moar, Adam.

http://i.imgur.com/WhOz8Lg.jpg

http://i.imgur.com/n5RnUPG.jpg
Shameless Instagram plug --> @nic.beesix (https://www.instagram.com/nic.beesix/)

That just works!! Love the color. The stance and even the damn license plate!


Sent from my iPhone using Tapatalk

[Nollywood]

OEM Audi S4 B7 Alloys.

Size: 8"x18"
Offset: 45
Spacers: Yes.
Fronts: 12mm.
Rears: 15mm.
Offset (corrected): Fronts: ET 33. Rears: ET 30.
Camber: -
Tires: Continental Sport Contact II 235/40x18.
Suspension: Stock Sport.
Spring Rates: Stock Sport.
Ride height: Stock Sport.
Fender mods: None.
Rubbing: None.

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/IMG_7472_zpscgmlyhjp.jpg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/IMG_7472_zpscgmlyhjp.jpg.html)

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/IMG_6190_zpsqeymvdng.jpg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/IMG_6190_zpsqeymvdng.jpg.html)

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/IMG_6180_zpstjm6cbzy.jpg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/IMG_6180_zpstjm6cbzy.jpg.html)

[A4 Quattro]

It's a wrap. 3M Matte Dark Grey.

Also, here's another couple shots since you asked for moar, Adam.

http://i.imgur.com/WhOz8Lg.jpg

http://i.imgur.com/n5RnUPG.jpg
Shameless Instagram plug --> @nic.beesix (https://www.instagram.com/nic.beesix/)


That just works!! Love the color. The stance and even the damn license plate!





Sorry to disappoint, but the car is no longer that color. It now a bit..... louder.


http://i.imgur.com/ukdi6eT.jpg

The damn license plate is still on point though [:D]
http://i.imgur.com/NKYXipy.jpg

[iconic78]

New wheels installed today. Rohana RC7. 19x9.5 32mm https://uploads.tapatalk-cdn.com/20170312/0ea0ad3c7b367ac7313d065581dc14fd.jpghttps://uploads.tapatalk-cdn.com/20170312/dbbaa8c3c9b90ebf8f44ddb15b6624ba.jpghttps://uploads.tapatalk-cdn.com/20170312/506b494a1d7be1ed49f34aa452de702e.jpg

I have these on my RS4 but 20x11 rears with 285/25 20 and 20x10 fronts.


Sent from my iPhone using Tapatalk

[Audi 4 Life]

New wheels installed today. Rohana RC7. 19x9.5 32mm https://uploads.tapatalk-cdn.com/20170312/0ea0ad3c7b367ac7313d065581dc14fd.jpghttps://uploads.tapatalk-cdn.com/20170312/dbbaa8c3c9b90ebf8f44ddb15b6624ba.jpghttps://uploads.tapatalk-cdn.com/20170312/506b494a1d7be1ed49f34aa452de702e.jpg
Looking good bro, i was actually eye balling those wheels awhile back trying to convince my buddy to get them for his AR since their availavle with such a lot ET. Looks great on your B6 tho glad to see you still have her.

Sent from my SM-G935T using Tapatalk

[Midnightblkb5]

looking good


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Doubleredrolex]

2004 S4 so it's basically an A4

Brand: MMR HR2
Wheel size: 20x8.5 et35
Spacers: No
Tires: 235/30r20
Camber: Stock
Suspension: H&R coilovers
Ride height: 24.5" FTG all around
Rubbing: Not really unless you hit a big bump
Fender mods: rolled
Brakes: stock S4

http://i1249.photobucket.com/albums/hh503/Lonnie_Foodikoff/IMG_8339_zpsdyosojzy.png (http://s1249.photobucket.com/user/Lonnie_Foodikoff/media/IMG_8339_zpsdyosojzy.png.html)

[hightime80]

Take those ghetto fabulous v8 badge off your fender please😱

[Nollywood]

Take those ghetto fabulous v8 badge off your fender please😱

Why? As long as he likes them, that's all that counts.

[naysay15]

No idle chit-chats in the wheel thread. Take it to the PMs if you all got something to say.

[19jdog]

Take those ghetto fabulous v8 badge off your fender please😱


🤣😄🙃

[hightime80]

WTF

[kabukie]

Was told these are from a 2015 a5. Haven't seen them on anything else yet.
18x8.5 et28 with 245/40/18 (only rubs on large bumps)

http://i1299.photobucket.com/albums/ag67/kabukie/IMG_5367_zpsac9jpj8g.jpg (http://s1299.photobucket.com/user/kabukie/media/IMG_5367_zpsac9jpj8g.jpg.html)

[audiurq]

https://photos-4.dropbox.com/t/2/AACejY3k_N1buP_4d1aXIbBt5xpD9G2qBgcNOq6yRAQR2g/12/142869914/jpeg/32x32/1/_/1/2/red%20avant%20PC3.jpg/EMnbsW0YrhkgBygH/0jereHpi3tOAzX60l7Dv3LL8e_SuW6CiELT8NenyLP8?size=1 600x1200&size_mode=3

[Ephry73]

On my B6 converted to 2.7tt

Brand: TSW Interlagos
Wheel size: 18x8.5 et32
Spacers: No
Tires: 245/40/18 Dunlop Sport Maxx RT
Camber: Stock
Suspension: stock USP springs front and back
Ride height: 25.5" FTG Rear and 25" FTG front
Rubbing: None unless I hit a big hump
Fender mods: stock(may need to roll the fronts after installing coils)
Brakes: Brembo 1LE BBK

https://uploads.tapatalk-cdn.com/20170614/cc9478ff76ab658b8f5f45d32cd66fff.jpg
https://uploads.tapatalk-cdn.com/20170614/63725768ee29cb49695d8483dc8ae0b0.jpghttps://uploads.tapatalk-cdn.com/20170614/37beac9b742de8b70662add43da40cee.jpg
https://uploads.tapatalk-cdn.com/20170614/d7ea09c3e45d6742eaa2f1bd997607b0.jpg


Sent from my iPhone using Tapatalk

[sebvw]

Brand: Fast FC04 Flowform
Wheel size: 18x9 et40
Spacers: 8mm front, 10mm rear
Tires: 215/45/18
Camber: Stock
Suspension: H&R springs, bilstein shocks
Ride height: will have to measure
Rubbing: Not really unless you hit a big bump with a full tank of gas
Fender mods: screw removed
Brakes: stock USP

https://uploads.tapatalk-cdn.com/20170620/b9a7fa2b66dbad75ad7cd34e9f4a6b17.jpg
https://uploads.tapatalk-cdn.com/20170620/dfd771d23b2e24d1c4c541f9e815e1d0.jpg
https://uploads.tapatalk-cdn.com/20170620/604715358949246335a9c1b44043fa9d.jpg
https://uploads.tapatalk-cdn.com/20170620/51ea4f973c1f465bbd31f72aef517788.jpg

[8Kami6]

Can someone tell me which wheels these are? I been trying to find out since I got the car.
https://uploads.tapatalk-cdn.com/20170713/1959f35add95b0c5c2a2f1547306900d.jpg

-Hachi Bee

[Devin]

19x9 RS4
ET 29
Front spacers 23mm
Rear none
Fenders rolled to fuck and back
Koni Sport Coilovers

http://i.imgur.com/ECftGWd.jpg?1

[Ephry73]

19x9 RS4
ET 29
Front spacers 23mm
Rear none
Fenders rolled to fuck and back
Koni Sport Coilovers

http://i.imgur.com/ECftGWd.jpg?1

Hard!


Sent from my iPhone using Tapatalk

[audi7720]

Did someone say wheels? I gotta get back into this thread.

http://i.imgur.com/UlQWE26.jpg

Not to be nosey, but how much would a wrap like that cost.. roughly? I feel like I need that color!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[A4 Quattro]

Not to be nosey, but how much would a wrap like that cost.. roughly? I feel like I need that color!

Look at you making me feel all nostalgic. My car looks completely different now. The wrap is 3M Matte Dark Grey. I did it myself for around $600. Shops in my area charge anywhere from $2k upwards of $6k. Not sure what your local shops would charge.

[Koksu0007]

https://uploads.tapatalk-cdn.com/20170724/ac6c79e1a68fd4fc67ac66792befcfb5.jpghttps://uploads.tapatalk-cdn.com/20170724/72f1cac46fed2acaebf583e267c44e49.jpghttps://uploads.tapatalk-cdn.com/20170724/81ef04dabda761a1c1584e6ffbdeac36.jpghttps://uploads.tapatalk-cdn.com/20170724/90093bab4840b4d6fdc0eb42e2f19653.jpg

Brand/Name: Japan Racing JR21
Size: 19x9.5"
Offset: 40mm
Spacer(s): no
Camber: no change
Tires: Federal ss595 215/35
Suspension: KW Variant 1

Wysłane z iPhone za pomocą Tapatalk

[audi7720]

Look at you making me feel all nostalgic. My car looks completely different now. The wrap is 3M Matte Dark Grey. I did it myself for around $600. Shops in my area charge anywhere from $2k upwards of $6k. Not sure what your local shops would charge.

How hard is it to wrap a car


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[papayou]

Before and after, Q7 wheels 8,5 X 19, Tires 215/35/19, Spacer 5X112 to 5X130, 27mm and coilover AP
Thks

https://img4.hostingpics.net/pics/170374A4B6avant.jpg

https://img4.hostingpics.net/pics/793633IMG20170331174958.jpg

[papayou]

what do you think ?? [:)]

https://img4.hostingpics.net/pics/355550IMG20170331175143.jpg

https://img4.hostingpics.net/pics/82435320170331182425.jpg

[TheDaver A4]

https://uploads.tapatalk-cdn.com/20170724/ac6c79e1a68fd4fc67ac66792befcfb5.jpghttps://uploads.tapatalk-cdn.com/20170724/72f1cac46fed2acaebf583e267c44e49.jpghttps://uploads.tapatalk-cdn.com/20170724/81ef04dabda761a1c1584e6ffbdeac36.jpghttps://uploads.tapatalk-cdn.com/20170724/90093bab4840b4d6fdc0eb42e2f19653.jpg

Brand/Name: Japan Racing JR21
Size: 19x9.5"
Offset: 40mm
Spacer(s): no
Camber: no change
Tires: Federal ss595 215/35
Suspension: KW Variant 1

Wysłane z iPhone za pomocą Tapatalk

Lookin sharp man!!

[TMeschke]

Brand/Name: VMR V701
Size: 19x8.5
Offset: ET35
Spacer(s): None
Camber: -1.7 Front, -1.3 Rear
Tires: 245/35
Suspension: Koni FSD and H&R Sport Springs
Fender mods: Fender bolt removed
Rubbing: None
Brake Spec: Brembo 17Z Front, Stock Rear (for now)

http://i.imgur.com/YyMYbEK.jpg

http://i.imgur.com/7fZrUpG.jpg

[VMRWheels]

Brand/Name: VMR V701
Size: 19x8.5
Offset: ET35
Spacer(s): None
Camber: -1.7 Front, -1.3 Rear
Tires: 245/35
Suspension: Koni FSD and H&R Sport Springs
Fender mods: Fender bolt removed
Rubbing: None
Brake Spec: Brembo 17Z Front, Stock Rear (for now)

http://i.imgur.com/YyMYbEK.jpg

http://i.imgur.com/7fZrUpG.jpg

Those V701 look great with the Brembos behind them [up]

Be sure to hang on to the silver centercaps by the way, those are a rare commodity these days!

[gtsingh91]

Alzor 628
18x8
ET 35
225/40 tires
5mm spacers front, 12mm rear
H&R springs, Koni FSD shocks/struts
https://c1.staticflickr.com/5/4365/37053799100_df812b0499_c.jpg
https://c1.staticflickr.com/5/4348/36599981444_a5bc0b9d62_c.jpg

[slam_it_all]

Will they fit????
18x9 with a +34 offset on a 2002 a4 with a 3" coil over drop

[lateski]

Will they fit????
18x9 with a +34 offset on a 2002 a4 with a 3" coil over drop

It shouldn't be a problem. I have in my summer setup standard BC Racing V1 coils almost in minimum height and 18x10,5" +30 R8 wheels fitted with 225/40 tires.

[AgresoR]

If anyone have MR V708 WHEELS GUN METAL 18 INCH 8.5J ET45 5X112 for sale so let me know [hail]

[A4 Quattro]

If anyone have VMR V708 WHEELS GUN METAL 18 INCH 8.5J ET45 5X112 for sale so let me know [hail]

I'm a dealer for VMR wheels if you're interested in a new set. DM me and I'll get you set up!

[AudiTechS4]

HRE 540r
19x9 / 19x10

https://i.imgur.com/IvHgakH.jpg

[itsmatt33]

HRE 540r
19x9 / 19x10

https://i.imgur.com/IvHgakH.jpg

twins except 19x8.5 square and brushed faces
https://image.ibb.co/fWy256/DSC08489.jpg

[A4 Quattro]

I haven't posted a wheel setup in this thread for a minute.

Brand/Name: SevenK Genos
Size: 18x10
Offset: +15
Spacer(s): Nope
Camber: -3 front, -5 rear. 034 rear camber arms
Tires: 215/40 Nankangs
Suspension: Airlift Performance
Ride height: Not even low
Fender mods: None, unless you count the missing paint
Rubbing: All the time
Brake Spec: Stock 3.0


https://i.imgur.com/RK6wuPM.jpg

https://i.imgur.com/qgqj8JF.jpg

[slam_it_all]

It shouldn't be a problem. I have in my summer setup standard BC Racing V1 coils almost in minimum height and 18x10,5" +30 R8 wheels fitted with 225/40 tires.

Awesome lateski. Thanks for the input!

[Badcopnodonut]

Moaaarrr

[:d]

[igotab6s4]

https://uploads.tapatalk-cdn.com/20180113/32b5eddd9cb4b3661bc79016ed5e9e17.jpg
https://uploads.tapatalk-cdn.com/20180114/8f3cf366851ac7c54e26efee7b822e1f.jpg

Respect isn't Given it's Earned

[DarkoNova]

Looking at some new wheels. Coilovers are set to 24.5" all around, what's a good size that won't rub?

Looking at 3sdm's, sizes are 18x8.5, 18x9.5, and 19x8.5 in various offsets. Rubbing on big bumps is ok, just as long as turning radius isn't affected.

EDIT: I used a site for comparing offsets and it looks like an 18x9.5 with +40 offset with a 235/45/18 will only stick out an extra .25". Looks like that may be a good fit. Not sure on the tire size. I just used the stock sport suspension tire size but for an 18" wheel.

[A4 Quattro]

Looking at some new wheels. Coilovers are set to 24.5" all around, what's a good size that won't rub?

Looking at 3sdm's, sizes are 18x8.5, 18x9.5, and 19x8.5 in various offsets. Rubbing on big bumps is ok, just as long as turning radius isn't affected.

EDIT: I used a site for comparing offsets and it looks like an 18x9.5 with +40 offset with a 235/45/18 will only stick out an extra .25". Looks like that may be a good fit. Not sure on the tire size. I just used the stock sport suspension tire size but for an 18" wheel.

If it were me, I would run a 225/40 tire on that 18x9.5 +40 setup. It'll be a little stretch, but not to the point where I would be afraid to daily drive it. A 235/45 is pretty meaty, and would probably rub a good bit.

I'm also an authorized dealer for 3SDM wheels. Let's talk about what you're after and I'll see if I can't get you set up.

[DarkoNova]

Awesome!

I'm still torn between the 18's and the 19's.

I was looking at the 0.06's, I don't mind the occasional rub over bumps, and I also don't mind a bit of stretch. But I don't want something crazy like. 205 on a 10 inch wheel, lol.

I'd also like it to still feel like it handles pretty good.

I don't know if all of that is too much to ask for 19" wheels.

[A4 Quattro]

Awesome!

I'm still torn between the 18's and the 19's.

I was looking at the 0.06's, I don't mind the occasional rub over bumps, and I also don't mind a bit of stretch. But I don't want something crazy like. 205 on a 10 inch wheel, lol.

I'd also like it to still feel like it handles pretty good.

I don't know if all of that is too much to ask for 19" wheels.

I have a 215 on my 10 wide show wheels haha (seen a few posts up). I definitely don't recommend trying to daily that. Depending on how far away the show is, I don't even put them on until I get to the venue!

In my experience, I hated my B6 on 19s. It felt higher even when I lowered it, and didn't ride as well, but I know a lot of people love them. It's really a personal preference thing. If you're looking for ride comfort, I would run an 18" wheel with a mild stretch if any. The 225/40 I mentioned earlier would be perfect.

Let's move this conversation to PM, so all the people subbed to this thread don't get bombarded with notifications.

[Laurentiu]

I am thinking about buying a new set of wheels, but I can't decide what rim width to choose. I can either go safe, with 235/40/18 8j with an et between 15 and 42, or 9j with et between 0 and 38. So it's either 8J et35 or 9J ET38. I am not sure if the 9J will fit without rubbing. It will stick 10mm farther than the 8J. Is anyone running with such a configuration (9J ET38) that could post some photos and give me some feedback?

[A4 Quattro]

I am thinking about buying a new set of wheels, but I can't decide what rim width to choose. I can either go safe, with 235/40/18 8j with an et between 15 and 42, or 9j with et between 0 and 38. So it's either 8J et35 or 9J ET38. I am not sure if the 9J will fit without rubbing. It will stick 10mm farther than the 8J. Is anyone running with such a configuration (9J ET38) that could post some photos and give me some feedback?

https://i.imgur.com/BNUuiHQ.jpg

18x9 +38 with a 225/40 tire. Zero modification to the fenders or camber adjustment. You can get dirt nasty low on 9 wides.


You can also get low on 18x10, even with a low offset, but you start getting into super stretched tires, modified fenders, and non-stock camber adjustment.

https://i.imgur.com/blh1jn5.jpg

https://i.imgur.com/5ZGp5V1.jpg

[projectvoltron]

Brand/Name: Miro 111
Size: 19x8.5
Offset: et32
Spacer(s): 12mm all 4 corners
Camber: unknown
Tires: 225/40/19
Suspension: Jom coilovers
Spring Rates:
Ride height:
Fender mods: rolled and pulled
Rubbing: on big bumps and sharp turns
Brake Spec: 18z

Powder coated satin metallic bronze

Better Pictures to come

58843

58844

58845

58842

[Boosted Buffalo]

Brand/Name: 2003 OEM Mercedes E500
Size: 18x8.5
Offset: et37
Spacer(s): none, just hub rings
Camber: stock no alignment
Tires: 245/40/18
Suspension: Solo Werks S1
Spring Rates: 490 front 420 rear?
Ride height: meh
Fender mods: Mallet front, phonebook rear. Liners sorted themselves out with time.
Rubbing: Good amount front, rear over bumps or with people in the back.
Brake Spec: stock as ****

Powder coated black


59268592695927059271


Sent from my SM-G930W8 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[AvantNoir]

Guess I'll play...

Brand/Name: 2013-2016 OEM Audi A5 Wheel P/N: 8T0601025BM
Size: 18x8.5
Offset: et29
Spacer(s): 8mm front to clear HP2 Brakes (Working on S5 Caliper swap that will eliminate spacers)
Camber:
Tires: 245/40/18
Suspension: ST Coilovers
Spring Rates: ??
Ride height: some, but not slammed.
Fender mods: Front and rear fenders rolled and pulled. Fender liners were cut as well.
Rubbing: None.
Brake Spec: Lucas HP2 front brakes - working on doing S5 brake swap

https://farm5.staticflickr.com/4620/40440819122_92c39aa3fb_o.jpg
https://farm5.staticflickr.com/4719/38673368670_1655905532_o.jpg
https://farm5.staticflickr.com/4655/40483593341_bceb200921_o.jpg
https://farm5.staticflickr.com/4749/39573157695_00001424dc_o.jpg

[redline61]

That is perfect right there! Love it

[Audrius97]

Brand/Name: BBS ASA Revolution
Size: R18
Offset: Et35
Tires: 225/40
Suspension: Eibach red springs
Spring Rates: idk
Ride height: high :D
Brake Spec: stock, but finking about bigger

http://www.part.lt/img/77380a600591e47a2094be8e1e54677d746.jpg (http://www.part.lt/perziura/77380a600591e47a2094be8e1e54677d746.jpg)

http://www.part.lt/img/3ed0c6ba8aefeefc62bd085d5f51820067.jpg (http://www.part.lt/perziura/3ed0c6ba8aefeefc62bd085d5f51820067.jpg)

[projectvoltron]

Brand/Name: Miro 111
Size: 19x8.5
Offset: et32
Spacer(s): 12mm all 4 corners
Camber: unknown
Tires: 225/40/19
Suspension: Jom coilovers
Spring Rates:
Ride height:
Fender mods: rolled and pulled
Rubbing: on big bumps and sharp turns
Brake Spec: 18z

Powder coated satin metallic bronze

Some Updated Pictures

Kinda

Ignore the water spots [headbang]

https://farm1.staticflickr.com/978/41413695194_6f3044e78d_k.jpg (https://flic.kr/p/266A1Ku)

https://farm1.staticflickr.com/952/41413691314_6ea9c89e8b_k.jpg (https://flic.kr/p/266zZAA)

https://farm1.staticflickr.com/975/28261440938_2248524369_k.jpg (https://flic.kr/p/K4ngM5)

https://farm1.staticflickr.com/944/41413679564_8f8b5c135e_k.jpg (https://flic.kr/p/266zW71)

[Slatman230]

Hi guys, i recently buy new wheels 17inch for my car but unfortunately i don't have the center cap can someone tell me what is the right number of center cap.
I found two that can possibly match
8E0601165H7ZJ
8D0601165EZ17
https://ibb.co/nAzBLo

[WeekendDriver]

Brand/Name: ASA Revolution AR1
Size: 18x8J
Offset: 45 mm
Spacer(s): 7 mm in the back, none in the front (yet).
Camber: no idea, should be stock.
Tires: 235/45 R18 Sava Intensa UHP 2
Suspension: 1BR, but ride height is about equivalent to 1BA thanks to the saggy springs.
Fender mods: none.
Center caps: none, can't find anything compatible :(
Rubbing: none detected so far.
Brake Spec: stock 312 mm.

https://i.imgur.com/9ox2scM.jpg

https://i.imgur.com/sN7C2JB.jpg

[Gunnarrrrr]

Brand/Name: Avant Garde M310
Size: Staggered - 19x8.5 ET35 X 19x9.5 ET40
Camber: Stock
Tires: 235 35 19 X 245 35 19
Suspension: BC Coils
Fender mods: none needed
Rubbing: zero whatsoever
Brake Spec: stock

Running a set of 19x10 rotiforms now,
so this set is for sale.

http://i66.tinypic.com/2r4iz9c.png
http://i64.tinypic.com/2q0mwq8.jpg
http://i65.tinypic.com/9qjw5y.jpg
http://i63.tinypic.com/2cnchz.jpg
http://i66.tinypic.com/6qcefn.jpg

[Gunnarrrrr]

https://i.imgur.com/BNUuiHQ.jpg


Link to the info on that rear bumper plz

[A4 Quattro]

Link to the info on that rear bumper plz

It's an OEM S4 rear bumper. I cut it to fit the quads.

[PSI NRG]

So after a lot of research and some major doubt about whether or not my desired wheel set up would fit from peers. I managed to squeeze in a set of 18X9 ET34 wheels with 245/40/18 tires. I love the results! 76605


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[d0wn5h1ft]

Brand/Name: ROTIFORM RSE
Size: 18x9.5
Offset: +35
Spacer(s): None
Camber: -2.0F / -1.0R
Tires: Rollers 225/40/ZR17
Suspension: Godspeed Mono RS
Spring Rates: 12kgmm F/R
Ride height: 23 7/8" F / 24 1/4" R
Fender mods: F-NONE / R-Pulled & Flared
Rubbing: NONE
Brake Spec: Factory

https://s8.postimg.cc/mzepoegoj/IMG_4016.png

https://s8.postimg.cc/t0celhiqb/IMG_4021_1.png

https://s8.postimg.cc/ybrb66x37/IMG_4020.png

[webmouth247]

Brand/Name: ROTIFORM RSE
Size: 18x9.5
Offset: +35
Spacer(s): None
Camber: -2.0F / -1.0R
Tires: Rollers 225/40/ZR17
Suspension: Godspeed Mono RS
Spring Rates: 12kgmm F/R
Ride height: 23 7/8" F / 24 1/4" R
Fender mods: F-NONE / R-Pulled & Flared
Rubbing: NONE
Brake Spec: Factory

https://s8.postimg.cc/mzepoegoj/IMG_4016.png

https://s8.postimg.cc/t0celhiqb/IMG_4021_1.png

https://s8.postimg.cc/ybrb66x37/IMG_4020.png

So you had to do fender mods to run 9.5 with an et 35? Do you think an et 39 will be ok with no fender mods?

[A4 Quattro]

So you had to do fender mods to run 9.5 with an et 35? Do you think an et 39 will be ok with no fender mods?

I ran 18x9.5 +25 with no fender mods. I had a pretty small 215/35 tire on it though. Fitting wheels is easy. It's getting the tire in there, and getting low that becomes an issue.

[AudiDK]

Brand/Name: ZITO
Size: 18x8.5
Offset: +28
Spacer(s): None
Camber: None
Tires: ContiSportContact 225/40/ZR18
Suspension: Factory
Spring Rates: Factory
Ride height: N/A
Fender mods: FR-NONE
Rubbing: NONE
Brake Spec: Factory

https://s8.postimg.cc/gf9onjp1x/IMG_20171030_150244.jpg

(Sorry for the grainy picture, it was a lousy camera on that cellphone ;-) )

[hightime80]

Pic is fine. The angle is crap. Can't see.the wheels at all....no offense

[AudiDK]

None taken, will try to search for another angle later :)

[AudiDK]

Better angle...
https://s8.postimg.cc/436sa1thh/20180705_203157.jpg
https://s8.postimg.cc/joo3u2xqt/20180705_203149.jpg

[ventovr6qc]

Brand/Name: Rotiform CCV
Size: 18x8.5 and 18x10
Offset: +35F +35R
Spacer(s): 10mm in front
Camber: a little on stock arms
Tires: 225 35 19
Suspension: airlift
Spring Rates: accuair e-leel
Ride height: Low
Fender mods: F- fender lip rolled R- pulled with oem lines
Rubbing: NONE
Brake Spec: Factory
https://i.postimg.cc/htqmxCsQ/20180929_204624_HDR.jpg

[WerkzINC]

Brand/Name: MRR VP7
Size: 18x 8.5 / 9.5
Offset: 35f . 32r
Spacer(s):
Camber: stock
Tires: Achilles atr sport 225/40/18 all around
Suspension: raceland ultimos
Spring Rates: ?
Ride height: ?
Fender mods: removed front upper fender screw
Rubbing: none
Brake Spec:stock
https://i.imgur.com/aRLa2m2.jpg
https://i.imgur.com/eJhajiJ.jpg
https://i.imgur.com/PKJOOzQ.jpg

[Mr_Dude]

Whells: Rs4 B7 9J ET29

Tyre: 225/35/19https://uploads.tapatalk-cdn.com/20181110/fc34068a4ac55909e4eb8847f20906ff.jpg

Enviado do meu SM-G960F através do Tapatalk

[brolli21]

So,after reading this tread over and over in search of the perfect fitment for my 1,8t quattro avant,at least i got something.

Brand/Name: Audi S5(RS6) Peelers
Size: 9x19
Offset: 33
Spacer(s): 5mm in the rear,still working on the front
Camber: Not a clue,pretty much when i air out
Tires: 215/35/19
Suspension: Airlift Performance airride
Spring Rates: Bags
Ride height: Yes,or no,or,well,you get it
Fender mods: None
Rubbing: Depends on ride hight
Brake Spec: Brembo Z18 w/ 350mm discs up front, S4 B6/7 rear

https://farm5.staticflickr.com/4873/44672097560_08300698ff_k.jpg

https://farm5.staticflickr.com/4861/44672098970_eabd252be2_k.jpg

https://farm5.staticflickr.com/4858/45575946815_7346389d5e_k.jpg

[Doubleredrolex]

Most people come here looking for wheel and tire ideas and such. Ride height (fender to ground) is important when getting the right look. Please go measure it and don’t be lazy. Entering “Low” should not be an acceptable answer. Hardly anyone bothers to fill out the info suggested. I can see someone not knowing their wheel offset or spring rates etc, but come on, Ride height isn’t hard to find out. Just sayin.

[kaleb.anderson]

Anybody have b7 ti wheels on your b6? Trying to get an idea of what it would look like and can't find a whole lot

[kaleb.anderson]

128993

Turns out they're not bad

[WeekendDriver]

Turns out they're not bad
It's the complete opposite of bad! And I love your ride height. Did you do suspension lift? Or is it stock 1BR or something?

[kaleb.anderson]

It's the complete opposite of bad! And I love your ride height. Did you do suspension lift? Or is it stock 1BR or something?

Thanks!
She looks a bit higher in the pic than the actual height - sits at ~stock height. I realized while putting those wheels on that I'm actually running Bilsteins. I need to do some more research on which they are

[locallyhated802]

Loving these wheels. Need to get some low though. 143560

Sent from my LML713DL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[jasey8]

Do you guys think 235 55 r18 tires will fit in a4 b6 Avant? The rims are 18 et44 off a Volkswagen and the car is completely stock suspension. Is it compatible and able to clear suspension, would it need spacers? I read somewhere that some things may be affected such as speedometer but I just want to know if it'll work.

Sent from my Pixel 2 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hightime80]

The offset is fine unless u have a BBK setup. In fact it probably won't even rub if you don't have sport suspension and rides high on the stock set up. The only problen is its gonna look stupid as hell with a tire profile that big. Might as well jack up the suspension and go monster.

[oaybar007]

Brand/Name: OZ Ultraleggera
Size: 18x8
Offset: 35
Spacer(s): None
Camber: Stock (-1.2 fronts)
Tires: Pirelli PZero All Season Plus 235/40 18
Suspension: Koni 1145 (Eibach Pro Kit/Koni Yellow Adjustable)
Spring Rates: 331lb Front / 400lb Rear
Ride height: .75"-1" Lower than stock sport
Fender mods: None
Rubbing: None. Screws in fender liner still present.
Brake Spec: ECS Slotted 288mm front & 245mm rear with Hawk HPS pads.

https://i.imgur.com/YlNGueQ.jpg

[Stock B6]

Brand/Name: VMR V708
Size: 19x8.5
Offset: 38
Spacer(s): N/A
Camber: -1.5ish all around
Tires: Continental SC2 245/35R19
Suspension: B6 S4 Shocks, Tein S.Tech Lowering Springs
Spring Rates: How tf would I know?
Ride height: 25" FTG
Fender mods: Fender liner screw removed
Rubbing: Only at full lock.
Brake Spec: B8 S4 front calipers and B7 S4 rear calipers, R1 slotted rotors

https://live.staticflickr.com/65535/48621887041_d862f13d55_b.jpg (https://flic.kr/p/2h5xT4g)

https://live.staticflickr.com/65535/48621896466_a639171cdf_b.jpg (https://flic.kr/p/2h5xVRL)

[JuanBrolo84]

Literally the same as last guys but I have koni coil overs all around.179490179491179492

Sent from my HD1925 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Rikah]

Which ones?179948179949

Sent from my SM-N960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Audi 4 Life]

Which ones?179948179949

Sent from my SM-N960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)5 spokes for sure.

Sent from my SM-G960U using Tapatalk

[okak]

Brand/Name: Audi A5 OEM Wheels from 2013-2014

Size: 18x8.5

Offset: +29 ETA

Spacer(s): None

Camber: slightly negative due to lowered geometry with stock control arms.

Tires: 235/40 Michelin Pilot A/S 3+

Suspension: Bilstien B8 shocks paired with H&R lowering springs. This pairing is sold as a kit by ECS tuning and claims about 1.7in F and 1.6in R lower than stock. ES#850

Spring Rates: Unknown

Ride height: Center of front wheel well fender edge to ground = 25inch, Center of back wheel well fender edge to ground = 25inch

Fender mods: None

Rubbing: Yes, front left slightly rubs everytime I hit a minor pothole or dip in the road. I initially went slightly narrower on tires in the hopes of making the setup fit without rubbing. I suspect a slightly smaller tire wall height would have been ok. As it stands now, I may be able to solve the issue with the the fender screw mod. Otherwise rolling time.195248195249195250

Sent from my Mobira Talkman

[Audley]

Your saying this b6 car has 20x11 rear with 285-25-20 tire and 20x 10 fronts whats the rimes offset

[Steve Bassen]

Alzor 654's (19x8.5 ET42) with MPS4S 255/35-19's... Bilstein coils lowered about 3/4". Front needed 5mm spacer to clear the Q5 4pots and I think it would have rubbed the upright without the spacer, as well. Rear no spacer (would have been too close to the fender arch for comfort).

https://i.imgur.com/0bLCQCf.jpg

[wafi ahmed]

267945
18x9.5 et35
245/40/18
On coilovers
No spacers
No rolling
Rubs only when hits bump


Sent from my iPhone using Audizine Forum

[Mickroy]

290215290216

XXR 527 in 18x8.75 +40.
235/40/18
Lowered with Bilstein struts & Eibach springs.
Only brake upgrade is RDA slotted rotors.
No spacers or rubbing.

[Evan1028]

Bump?

[Evan1028]

I need to get pictures on my next detail LOL

[1.8TFan]

Finally got my rims...

https://www.audizine.com/gallery/data/500/medium/IMG_20230901_185459_01.jpg
https://www.audizine.com/gallery/data/500/medium/IMG_20230901_185454_01.jpg
https://www.audizine.com/gallery/data/500/medium/IMG_20230901_185450_01.jpg

It's dirty and dusty but I wanted to get a few shots anyway. Wheel details:

VMR V710 19"x 8.5" ET35 with 235/35/R19 tires. No spacers, no drop, no rubbing. It's getting dropped soon, still have some other bugs to work out first, ABS light woes. Did get the new one piece S4 outer tie rods and stock inners swapped out. New alignment and it feels way better.

[Evan1028]

Nice looking combo, black and red look great together! [up]

[Evan1028]

Well I am finally getting some pictures uploaded, here you go! 18" Stock B7 S-Line Wheels.

https://i.ibb.co/Y37kM28/Front-Angle.png

https://i.ibb.co/C0W2vpq/Rear-Angle.png

[1.8TFan]

Appreciate it, yeah I like the look too. Your B7 wheels look good too, clean.

[Evan1028]

Appreciate it, yeah I like the look too. Your B7 wheels look good too, clean.

thanks mate [up]

[Reginka]

Well I am finally getting some pictures uploaded, here you go! 18" Stock B7 S-Line Wheels.

https://i.ibb.co/Y37kM28/Front-Angle.png

https://i.ibb.co/C0W2vpq/Rear-Angle.png


In my opinion, this tire is the best fit for your car. [:)]

[Gunnarrrrr]

past and present

19x10 et35 rotiform spf wrapped in 275/30 hankooks.

heavily rolled and pulled fenders, rears totally flared out. no rubbing at this height.

https://i.ibb.co/K6j8Yx0/IMG-1535.jpg

currently on 18x8.5 b8.5 A5 wheels, et29.
scrapped the old fenders for new ones, and gave these a full roll and almost no pull. needs 10-15mm spacers out back to fill the gap left from the old setup. wrapped in the oem 245/40 bridgestones. ditched the BC coilovers for tein springs.

https://i.ibb.co/sq0yf6q/IMG-1534.jpg


Sent from my District Green iPhone 13 Pro using Audizine Forum

[Nirvana09]

320755

Mercedes 190 Gullideckel rims, 225/75R15 tires, Porsche studs.

With my lift everything fits perfect. About nine inches of ground clearance. Where I live I need every inch I can get.

[driveway]

Squeezed some AMG monoblocks in from '98 SL500. A little too much rubber but i kinda like it. Rubs a smidge occasionally. Stock sport suspension on the 1.8 6spd with USP bits at painter.

Wanted to try but not sure If I'm keeping.

[canonball]

Squeezed some AMG monoblocks in from '98 SL500. A little too much rubber but i kinda like it. Rubs a smidge occasionally. Stock sport suspension on the 1.8 6spd with USP bits at painter.

Wanted to try but not sure If I'm keeping.

This looks awesome! [up]

[Stock B6]

Brand/Name: VW Savannah (Tiguan R-Line wheels)
Size: 19x9
Offset: +33
Spacer(s): N/A
Camber: -1.5ish all around
Tires: Michelin PSS 235/35R19
Suspension: B6 S4 Shocks, Tein S.Tech Lowering Springs
Spring Rates: Still don't know
Ride height: 25" FTG
Fender mods: Fender liner screw removed
Rubbing: meh not really
Brake Spec: B8 S4 front calipers and B7 S4 rear calipers, R1 slotted rotors

https://live.staticflickr.com/65535/51513858928_d88bc61fdf_c.jpg (https://flic.kr/p/2mu6Zxw)

OEM 19x9's are peak for this chassis imo, whether it be S5 Peelers, B7 RS4 wheels, Speedlines, etc.

[Gunnarrrrr]

nice.

I’ve been big on OEM 18x8.5’s lately. All the A5 versions are ET29. about to grab a b9.5 set to replace the b8.5 ones i’m running now.


Sent from my iPhone using Audizine Forum

[Danisson]

Brand/Name: SSM (Audi 4E0601025) OEM UltraSport Alloys
Size: 18"x 8J
Offset: 43
Tires: Continental "SportContact 6" (DOT 0723)

Noticed these are somewhat lighter than the 17" of the same model... guess the lower tire profile and the Si7 alloy helps :) Car feels great ! Man o man, these are so hard to find around here... now that 1 year of searching and dreaming finally pays off !

[Mike Tries]

Those wheels look great! I like the "Turbo" logo on the back, too. Nice, clean look.

Also, that's kind of a cool old-looking building there. What is--or was it?

[Danisson]

Those wheels look great! I like the "Turbo" logo on the back, too. Nice, clean look.

Also, that's kind of a cool old-looking building there. What is--or was it?

Thanks a lot ! [:p] The city itself was a very important industrial pin on the map back in the 80s... this specific building used to be a marine engines factory, making giant piston rods, crankshafts and gears.