PDA

View Full Version : EvilEvo's Build Thread



Pages : [1] 2 3 4 5 6 7 8 9 10 11 12

Evilevo
07-08-2009, 08:07 PM
I know, I know. I took along time to make a real build thread but i have been really lazy and didnt have alot of information to post up.

So now i am actually taking the time to post up.

As alot of you know, i had oil problems with my car after hybrid RS6ss were on the car. And as such, i spun a bearing on cyl6. This than prompted me to rebuild the motor. I originally was gonna just replace the bearing and rods and freshen up the motor, but after thinking it through and getting my finances in order, I decided to just go all out and build everything and go GTs.

The parts list are as follows:

Engine bore: 2.8L
Rods: Pauter
Pistons: JE 82.5
Heads: 2.8
Cams: 2.8
Valves, springs, retainers, whatever: 034 Ti Valvetrain and 034 Valves(intake and exhaust) new stock Hydro Lifters
Headgasket: stock
Compression ratio: ~8.8-1
Intake Manifold: Stock
Throttle Body: Stock
Diverter Valves: 710Ns
Turbo kit (ie. Tial, ASP, Vast, VAG, GenX, Custom): Agtronic
Turbos (use full model # like GT2560R-466541-1) : GT2871R-0002 .64AR [;)]
Wastegates (routed external?): Tial MVS 38mm, Dumped Externally
MAF (brand and size): EPL GT MAF
Injectors: EV14 82# @4BAR = ~95#
Fuel Pump: 2x Bosch 044
Fuel Pressure Regulator: 4BAR
Air Intake/Filter: ProM
Tune: EPL
Clutch: Southbend Stage 4 Extreme
Flywheel: Southbend
Intercooler(s): ERs w/CF Shrouds
Mounts (motor, tranny and snub): 034 Track Density Motor Mounts, 034 Track Density Trans Mounts, Akipokol Diff mount, 034 billet carrier.
Exhaust: Custom VAST 3.5" exhaust with 100 cell race cats and Vibrant muffler
Which wideband: Zeitronix ZT-2
Miscellaneous : Phenolic Spacer, ARD Bi-Pipes, Raceware Head Studs, 034 Coated Rod Bearings. Heads also got a Valve Job and Bowl work.


Here are some pictures. I will get more this weekend when I go to the shop

The car:
http://farm4.static.flickr.com/3059/2899078751_b02df12b01.jpg

http://farm4.static.flickr.com/3292/2899070163_6d3e1018e5.jpg

http://farm4.static.flickr.com/3295/3108197215_789cf0fa8a.jpg



The Motor:
http://farm4.static.flickr.com/3388/3628943716_5e981f330b.jpg

http://farm4.static.flickr.com/3312/3628943052_502dd1d034.jpg

http://farm4.static.flickr.com/3391/3628129691_89716e5dca.jpg

The motor is now fully assembled and the manifolds are being made but i dont have pictures of that yet.

washyourrhands
07-08-2009, 08:09 PM
so my cars waiting for your meth kit=]

Evilevo
07-08-2009, 08:13 PM
so my cars waiting for your meth kit=]

My paypal account is waiting for your money [>_<]

Syrus5o
07-08-2009, 08:15 PM
snap

AMC
07-08-2009, 08:17 PM
adam i wanna slap u. we have a new projects/build subforum and u post it in the wrong section. fuckin whore

awtst3.a6
07-08-2009, 08:18 PM
Nooo you have to post here first if you read the other forum :p

Evilevo
07-08-2009, 08:19 PM
adam i wanna slap u. we have a new projects/build subforum and u post it in the wrong section. fuckin whore

Look asshat, read the rules of that section.


Nooo you have to post here first if you read the other forum :p

beat me to it [up]

AMC
07-08-2009, 08:21 PM
mother ****** i just did. adam when we meet at h20 just run me over please. sorry i dont pay attention to rules so never bother reading em

mholme
07-08-2009, 08:22 PM
Look asshat, read the rules of that section.

Doh![>_<]

Ianxcom
07-08-2009, 08:27 PM
Lol @asshat. I use that word all the time. So much in fact my girlfriend gets annoyed and pissed when i do.

wdbdy2000s4
07-09-2009, 06:56 AM
the lasta thing this forum need is another dead build thread that will be 50 pages long and updated once a month. [rolleyes]

..seriously though, GL adam.

Evilevo
07-09-2009, 06:59 AM
You know how we do. Work slow man! You me to post pics of me painting my interior?

TRANS4M
07-09-2009, 07:03 AM
painting the interior? Hopefully you're painting just the trim.

Evilevo
07-09-2009, 07:05 AM
Naw. I've decided to just dump paint all over the interior [;)]

wdbdy2000s4
07-09-2009, 07:07 AM
there's paint all over my interior too. The mods refuse to move my thread to the build forum where it belongs with all the other dead threads though.

Evilevo
07-09-2009, 07:08 AM
That's cause your not cool enough to be in here

wdbdy2000s4
07-09-2009, 07:11 AM
I'm just going to say I'm going GTs like you and post pictures of other peoples heads so I can get it moved. haha [;)] I'm just goign to stop b/c I'm ruining your thread. lol

highPSI-S4
07-09-2009, 08:56 AM
Can't wait to see the finished project Adam. GL

jibberjive
07-11-2009, 03:53 AM
Your turbos are GT28RS based? I thought you told me otherwise...

werewolves182
07-11-2009, 05:53 PM
Geeze Adam, finally a build thread for your beast. Just don't forget to update it, wouldn't want to forget about the constant progress being made on your car. You still in Towson btw? I might be up there this week.

Evilevo
07-13-2009, 06:49 AM
Your turbos are GT28RS based? I thought you told me otherwise...

Nope, they are GT2860RS based.


Geeze Adam, finally a build thread for your beast. Just don't forget to update it, wouldn't want to forget about the constant progress being made on your car. You still in Towson btw? I might be up there this week.

Yep, im up here everyday this week.




Another update, no pictures yet though. I ordered my Tilton Twin Disc. That should be here tomorrow. Thanks Mike(AudisportB5S4)!!

wdbdy2000s4
07-13-2009, 07:02 AM
Another update, no pictures yet though. I ordered my Tilton Twin Disc. That should be here tomorrow. Thanks Mike(AudisportB5S4)!!

how much? shoot me a pm if you don't want to post it.

AudiSportB5S4
07-13-2009, 08:33 AM
Another update, no pictures yet though. I ordered my Tilton Twin Disc. That should be here tomorrow. Thanks Mike(AudisportB5S4)!!

[up] No problem man! Can't wait to see the car come together!

ThirdStrike
07-14-2009, 04:40 PM
sooooo many really fast s4's are popping up. 'stage 3' needs to be reclassified. k04's are just too small for that moniker now.

Evilevo
07-15-2009, 12:18 PM
sooooo many really fast s4's are popping up. 'stage 3' needs to be reclassified. k04's are just too small for that moniker now.

lol, my car has been in the works for like 6 months now. I just never made a real build thread about it

Evilevo
07-15-2009, 12:19 PM
Another update, My Tilton Clutch and 90mm MAF housing and intake came in from VAST yesterday. I will get pictures of it on thursday night/friday when i get home.

AudiSportB5S4
07-15-2009, 12:20 PM
sooooo many really fast s4's are popping up. 'stage 3' needs to be reclassified. k04's are just too small for that moniker now.

I don't know about that, but I would say that GTs should be tagged as Stg4. Stage 3 ++++++++++++++++++ is dumb [:p]

Evilevo
07-20-2009, 06:48 AM
Stage 15 ;)

Evilevo
07-20-2009, 07:00 AM
A small update. Got my interior finished while the car was sitting.

http://i120.photobucket.com/albums/o169/ajbortz/S4/de2d715b.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/d0d492b2.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/874114c1.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/39bceaca.jpg

And the only picture i took of the clutch.

http://i120.photobucket.com/albums/o169/ajbortz/S4/b93dea8a.jpg

I'll get more of it when it is getting put on the motor.

diabolical1
07-20-2009, 07:59 AM
i like it. seems like it's coming together slowly. how much longer do you anticipate?

by the way, i really like that shot of the head on the first page.

jibberjive
07-20-2009, 05:49 PM
A small update. Got my interior finished while the car was sitting.

http://i120.photobucket.com/albums/o169/ajbortz/S4/de2d715b.jpg


Is that dash kit the metra that you filled in and sprayed? If so, what spray did you use?

Evilevo
07-20-2009, 05:54 PM
No clue man. Came with the car when I bought it. I don't think it is. Looks custom from the back

werewolves182
07-22-2009, 08:30 AM
The aluminum trim looks nice man. Never seen another S4 with A4 trim.

Evilevo
07-22-2009, 11:38 AM
The aluminum trim looks nice man. Never seen another S4 with A4 trim.

Thanks man! Glad we could swap! I wanna see your CF wrapped trim. When are you moving back to Towson?

werewolves182
07-23-2009, 07:02 AM
Thanks man! Glad we could swap! I wanna see your CF wrapped trim. When are you moving back to Towson?

So am I, the CF wrapped looks awesome now this its complete. Ive gotta snap a few pics for ya. Moving back to Towson August 28th. Seems like so long.

Evilevo
07-23-2009, 07:07 AM
So am I, the CF wrapped looks awesome now this its complete. Ive gotta snap a few pics for ya. Moving back to Towson August 28th. Seems like so long.

You should just come by Towson again sometime, but not for like 2 min like you did last time, LOL

BumbleBee
07-23-2009, 12:04 PM
are your manifolds done yet?

Evilevo
07-23-2009, 12:20 PM
are your manifolds done yet?

Dont you see my sig. The never ending build. No, shop is slacking, i went there the other day and flipped and told them they need to step it up. So hopefully some progress will be made [=(]

Reich
07-23-2009, 04:43 PM
Dont you see my sig. The never ending build. No, shop is slacking, i went there the other day and flipped and told them they need to step it up. So hopefully some progress will be made [=(]

Please take some pics when you gona go back to the shop.[up]

AAAA
07-24-2009, 08:19 AM
who's doing your build again? i can never remember their acronym

Haenszel20v
07-24-2009, 08:22 AM
DTM

Evilevo
07-24-2009, 08:36 AM
DTMotorsport

wdbdy2000s4
07-24-2009, 08:42 AM
DTMotorsport

DTM is a perfect acronym for their audi product line because apparently they Didn't Try Much. haha

Get 'er done Adam. I want to see it at H20. I might even come down to MIR before if you get it done sooner.

Haenszel20v
07-24-2009, 08:45 AM
Get 'er done Adam. I want to see it at H20. I might even come down to MIR before if you get it done sooner.

in for MIR day.

blackbenzz
07-24-2009, 09:17 AM
Adam says he wont drag race the car [down]

We will have MIR day in the fall Brian, no worries. You will get the long awaited 10s time slip. But I'm gonna grab it before you come back around to the lanes!!! MUHAHAHAAA

wdbdy2000s4
07-24-2009, 09:19 AM
Adam says he wont drag race the car [down]

We will have MIR day in the fall Brian, no worries. You will get a shot at the champ lol

lol. who's that? [confused]

Haenszel20v
07-24-2009, 09:19 AM
Adam says he wont drag race the car [down]

We will have MIR day in the fall Brian, no worries. You will get a shot at the champ lol
*shirt-rip-chest-thud*

seadoo4563
07-24-2009, 09:24 AM
*shirt-rip-chest-thud*


lmao[up]

AAAA
07-24-2009, 10:10 AM
Adam says he wont drag race the car [down]

We will have MIR day in the fall Brian, no worries. You will get the long awaited 10s time slip. But I'm gonna grab it before you come back around to the lanes!!! MUHAHAHAAA

we've got alota building to do before it'll run 10s. this is just the "stock" version.

Evilevo
07-24-2009, 11:15 AM
Adam says he wont drag race the car [down]

We will have MIR day in the fall Brian, no worries. You will get the long awaited 10s time slip. But I'm gonna grab it before you come back around to the lanes!!! MUHAHAHAAA

LOL, now that i dont have to deal with that shitty RS4 PP, i might drag it a couple times. I wanna get the rear diff crossmember to make sure that doesnt break

TheyCallMeARI
07-25-2009, 11:05 PM
Is that dash kit the metra that you filled in and sprayed? If so, what spray did you use?

I have the dash kit from metra in my car... it has two pieces with it the main plate and then a little one that goes around the screen.... here is the only picture i could find on my photobucket..
http://i11.photobucket.com/albums/a186/Spikee4u/DSC00485.jpg

and P.S. i realized in the picture the upper piece of the kit is not pushed in all the way and don't mind the antennas on the dash they are hidden now.

AAAA
08-02-2009, 09:20 AM
LOL, now that i dont have to deal with that shitty RS4 PP, i might drag it a couple times. I wanna get the rear diff crossmember to make sure that doesnt break

dude, its soooo different. rs4 pp sucks ass. you will definitely be able to drag it now, no problem.

42of250
09-02-2009, 12:11 PM
geez hurry up adam, have you replaced the GTI?

wdbdy2000s4
09-02-2009, 12:23 PM
LOL, now that i dont have to deal with that shitty RS4 PP, i might drag it a couple times. I wanna get the rear diff crossmember to make sure that doesnt break

look for jared's DIY post on mounting the rear diff too.

Evilevo
09-02-2009, 12:34 PM
Naw I never replaced the GTi. I used the money from it for the clutch and tune. I have the maxima now so I don't need another DD.

seadoo4563
09-02-2009, 12:37 PM
MAXIMA VS CL -------- BATTLE OF THE BEATERS!


watch out fo my vtec yo[evilsmile]

Evilevo
09-02-2009, 12:44 PM
Anyday of the week man. Nismo>Homo [;)]

Evilevo
09-05-2009, 07:58 PM
Should have some pictures this coming friday!

Don Supreme
09-24-2009, 06:09 AM
So I guess no h20 huh?

Evilevo
09-24-2009, 11:42 AM
So I guess no h20 huh?

I will be there. And my wheels will be there. But not the rest of the car.

wdbdy2000s4
09-24-2009, 12:12 PM
you going to drive your car bed?

http://i272.photobucket.com/albums/jj199/fitnesbuf/Grandmas-Boy-fox05-1.jpg

Evilevo
09-24-2009, 02:29 PM
you going to drive your car bed?

http://i272.photobucket.com/albums/jj199/fitnesbuf/Grandmas-Boy-fox05-1.jpg

Hey asshole. I had a car bed when i was like 5. It was fucking SWEET!!!!

Evilevo
09-28-2009, 02:34 PM
Update: Just purchased the Agtronic turbo kit. I am shipping him my modified GT28RS' for him to modify to use the VBand turbine housings. I am also going externally dumped Wastegates. So this bitch is going to SCREAM at wot [evilsmile]

Don Supreme
09-28-2009, 04:53 PM
Update: Just purchased the Agtronic turbo kit. I am shipping him my modified GT28RS' for him to modify to use the VBand turbine housings. I am also going externally dumped Wastegates. So this bitch is going to SCREAM at wot [evilsmile]

SO DTM failed huh?

Militant-Grunt
09-28-2009, 05:08 PM
Update: Just purchased the Agtronic turbo kit. I am shipping him my modified GT28RS' for him to modify to use the VBand turbine housings. I am also going externally dumped Wastegates. So this bitch is going to SCREAM at wot [evilsmile]

Thats going to get old for you after a month. I'm sick of my WG dump, going to be redoing my downpipe in the near future. You can't boost at all without looking all around you for police. Its horrible.

Haenszel20v
09-28-2009, 05:17 PM
Thats going to get old for you after a month. I'm sick of my WG dump, going to be redoing my downpipe in the near future. You can't boost at all without looking all around you for police. Its horrible.
uh, you should pretty much look around for cops anyways if you're high enough in the revs and full throttle enough to open the wastegates..... because 100mph is coming up REAL fast

Evilevo
09-30-2009, 10:20 AM
Thats going to get old for you after a month. I'm sick of my WG dump, going to be redoing my downpipe in the near future. You can't boost at all without looking all around you for police. Its horrible.

ROFL, if you have to look for cops because of noise and not how fast your car is going to accelerate, your shit is SLOW!!! [down]

Evilevo
09-30-2009, 05:48 PM
Just picked up the ARD bi-pipes and VAST high flow EFK, Thanks Mike!!

Evilevo
10-03-2009, 09:49 AM
Some updates, Just towed the car out of DTM and took it to my friends house. Waiting on the Agtronic kit now and gonna get the motor and trans ready for it this week.

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0010.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0011.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0012.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0008.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0015.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0016.jpg

Gen JDM BiPipes and VAST EFK
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0017.jpg

NogaroWonda00
10-03-2009, 12:22 PM
lookin good, if you have ANY other problems with getting people to fab in a decent amount of time dont hesistate to pm me and get a hold of me I have a great fab guy that im using and he does V bands on everything he touches now and has to be one of the cleanest welders I have seen. I have tons of pics of stuff hes made, if you want to see.. but hes doing my single setup.

AudiSportB5S4
10-03-2009, 01:14 PM
Looking good Adam!

wdbdy2000s4
10-03-2009, 06:06 PM
I'M NOT IMPRESSED







....with DTM

Evilevo
10-06-2009, 11:45 AM
Just got an update from Agtronic. The turbos arrived there today. He measured them and reported back. They are GT2871R with the .86AR. I didnt order those turbos so DTM really fucked me over. I didnt want something that large as i dont want that slow spool. I asked Agtronic to order me the .64AR housings, so hopefully that will help with spool.

blackbenzz
10-06-2009, 02:18 PM
Looks like DTM is full of fail [down]

Evilevo
10-06-2009, 03:43 PM
Looks like DTM is full of fail [down]

Hopefully we aren't full of fail and get this bitch running right!

blackbenzz
10-06-2009, 05:21 PM
Hopefully we aren't full of fail and get this bitch running right!

If I had a shop, tools, and got paid to work on a car... I'd make the car go back to the future in 8 months

jibberjive
10-06-2009, 05:27 PM
Sucks to hear that it didn't pan out with them. My stuff should be arriving in the mail any day now! Good luck with the new housings!

Evilevo
10-06-2009, 05:29 PM
If I had a shop, tools, and got paid to work on a car... I'd make the car go back to the future in 8 months

Haha, i dont want it to go back to the future in 8 months. I want it running fairly soon. LOL

Evilevo
10-06-2009, 05:29 PM
Sucks to hear that it didn't pan out with them. My stuff should be arriving in the mail any day now! Good luck with the new housings!

Thanks, Markku should be making my kit now [:D] I am very excited!

Evilevo
10-10-2009, 11:51 AM
Got the Motor on the stand
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0028.jpg

Cleaning up the upper oil pan, getting it ready to be installed. That is LowFlyer
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0029.jpg

Cleaning up the lower oil pan. And other parts layed out.
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0030.jpg

Whole big pile of parts. How i got everything back from DTM. [down]
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0031.jpg

Got the upper pan on and sealed up
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0032.jpg

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0033.jpg

Lower pan on and all sealed up
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0034.jpg

Starting to put the spark plugs in and getting the rest of the stuff ready.
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0035.jpg

I now have to order some more parts cause DTM lost a bunch of stuff. Need a new rear main seal gasket, need bolts for the knock sensors, fresh vacuum lines, the bolts for the power steering pump and the clamp for that too.

Agtronic has my turbos assembled with the Tial VBand housing and thinks they should have the kit completed by the end of this coming week.

Evilevo
10-11-2009, 12:00 AM
Finally got my B6 S4 brakes on. Stoptech Rotors and Hawk Ceramic Pads.
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0036.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0037.jpg

GURUMAN
10-11-2009, 07:08 AM
Exactly what I want for my S4 !

GURUMAN
10-11-2009, 07:12 AM
I was reading your thread and I saw that Markku, tha man solved you A/R problem by going to Tial housing... it comes to the same price anyways...
our locar guy charges us good money to plug that wastegate hole in the turbine...

Evilevo
10-11-2009, 02:17 PM
I was reading your thread and I saw that Markku, tha man solved you A/R problem by going to Tial housing... it comes to the same price anyways...
our locar guy charges us good money to plug that wastegate hole in the turbine...

Ya, the .86AR was too large anyway, and for him to use those turbo they needed the VBand housings. So we just ordered them in the .64AR, Problem fixed!

jibberjive
10-11-2009, 06:19 PM
I was reading your thread and I saw that Markku, tha man solved you A/R problem by going to Tial housing... it comes to the same price anyways...
our locar guy charges us good money to plug that wastegate hole in the turbine...
Tell me about it. It was $200CDN to weld those those stupid holes in the thick cast iron.

Those are some big turbos!

highPSI-S4
10-11-2009, 07:00 PM
looking good Adam[up]

Evilevo
10-11-2009, 07:12 PM
Thanks guys, after talking to a buddy of mine, I might end up getting a different BBK, but that will all be sorted after the car is running. Not completely sure how well the Single piston B6 brakes will work, but when i drove a B7 S4, they seemed to stop the car pretty damn well, and that car is like 500lbs heavier.

blackbenzz
10-12-2009, 07:52 AM
Thanks guys, after talking to a buddy of mine, I might end up getting a different BBK, but that will all be sorted after the car is running. Not completely sure how well the Single piston B6 brakes will work, but when i drove a B7 S4, they seemed to stop the car pretty damn well, and that car is like 500lbs heavier.

Hmmm, I think someone told you that before... Not only is it single piston but the pad surface is quite small. Get a real BBK and stainless lines. MUCH better. Let me know when the parts get here so me and Anthony can go get some more done

Dowskeet
10-13-2009, 04:01 PM
Looks awesome man good luck with this project. Ill be watching..

Cheers

Evilevo
10-14-2009, 03:49 PM
Looks awesome man good luck with this project. Ill be watching..

Cheers

Thanks man! I should have more pics/progress this weekend

Evilevo
10-16-2009, 11:11 PM
Some pictures from earlier in the week
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20002.jpg

http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20003.jpg


http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20005.jpg

werewolves182
10-17-2009, 10:13 AM
Looks sick man.

s2the4
10-17-2009, 11:08 AM
very nice adam! MORE!

On a side note take your damn exhaust thread link down, it says you already sold it!

Evilevo
10-18-2009, 07:45 PM
very nice adam! MORE!

On a side note take your damn exhaust thread link down, it says you already sold it!

lol, thats weird, considering it is still sitting in my house. not sure how it is sold. [rolleyes]

Evilevo
10-18-2009, 07:48 PM
Got my CHs back, How the car is sitting now.

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0044.jpg

Flywheel/Clutch/Trans are getting bolted on this week. Had some setbacks with missing flywheel bolts. Still waiting on the turbo kit from Agtronic

seadoo4563
10-19-2009, 06:48 AM
Got my CHs back, How the car is sitting now.

http://i120.photobucket.com/albums/o169/ajbortz/S4/IMAG0044.jpg

Flywheel/Clutch/Trans are getting bolted on this week. Had some setbacks with missing flywheel bolts. Still waiting on the turbo kit from Agtronic

daaaaaammmmnnnn... getting closer[o_o]

98a4
10-20-2009, 12:44 PM
Agtronics online store needs to come back online! I'm interested

wdbdy2000s4
10-20-2009, 12:59 PM
Agtronics online store needs to come back online! I'm interested

they e-mail quotes to all customers based on your particular needs and requests. call them and Tamara will email you a quote within 24 hours.

98a4
10-20-2009, 01:01 PM
they e-mail quotes to all customers based on your particular needs and requests. call them and Tamara will email you a quote within 24 hours.

Done. [:D]

Evilevo
10-20-2009, 01:32 PM
they e-mail quotes to all customers based on your particular needs and requests. call them and Tamara will email you a quote within 24 hours.

LOL, i have only talked with Markku.

wdbdy2000s4
10-20-2009, 01:43 PM
LOL, i have only talked with Markku.

I talked to him once and couldn't understand a word he said. I stuck to email from that point forward.

Evilevo
10-20-2009, 01:54 PM
I talked to him once and couldn't understand a word he said. I stuck to email from that point forward.

I usually stick to email with him, but when i need to get intouch quickly i just call them.

Evilevo
10-20-2009, 02:01 PM
JHM Porsche Cayenne BBK and 034 Rear BBK ordered. Gotta have the whole package!

jibberjive
10-20-2009, 08:50 PM
I talked to him once and couldn't understand a word he said. I stuck to email from that point forward.

Really?

Yeah Adam, definitely call if you have to get ahold of them quickly.

Evilevo
10-20-2009, 09:08 PM
Another update. Markku spent these last 2 days at the shop late to get my kit finished in time for me to have it this weekend. It is almost done now. Here are the pictures that he just sent me.
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20006.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20007.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20008.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20010.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20014.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20015.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20018.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20019.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20020.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20021.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20022.jpg

bigern45
10-20-2009, 09:16 PM
WOW.. beautiful..

Mrsfourrings
10-20-2009, 09:21 PM
Finally...the light at the end of the tunnel!!!!!!!!!!

nthusiastt
10-20-2009, 09:21 PM
Should've gone single :)

01audia4
10-20-2009, 09:24 PM
I believe I have been watching youtube videos of your car for the last two days----I think it is one of my favorite, and that was before the build; Haven't been this year, but normally i'm in Towson every weekend, my girlfriend goes to Loyola. When i sell the A(hopefully next week) and get the S i have to see this project.

Evilevo
10-20-2009, 09:25 PM
Should've gone single :)

[>_<]

Evilevo
10-20-2009, 09:27 PM
I believe I have been watching youtube videos of your car for the last two days----I think it is one of my favorite, and that was before the build; Haven't been this year, but normally i'm in Towson every weekend, my girlfriend goes to Loyola. When i sell the A(hopefully next week) and get the S i have to see this project.

What videos have you been watching? I dont have many videos of my car. [:|]

B5stgIII
10-20-2009, 09:29 PM
So nasty, looking forward to seeing more updates. Well done man

washyourrhands
10-20-2009, 09:58 PM
omfg.

fap fap fap fap

blackbenzz
10-21-2009, 07:11 AM
Nice! Tell him to put the whole thing on a pallet and send it down. Make install alot easier LOL

AudiSportB5S4
10-21-2009, 07:32 AM
Wow Adam looks great, they do amazing fabrication work by those pics! [o_o]

Evilevo
10-21-2009, 08:49 AM
Nice! Tell him to put the whole thing on a pallet and send it down. Make install alot easier LOL

LOL, but that motor isnt built [;)]

Spooled1.8
10-21-2009, 08:56 AM
Looks great [up]

Agtronic
10-21-2009, 11:30 AM
Hey hey guys, what's this about me being hard to understand?! It's not my fault my vocabulary is too technical for some of you! ;) J/K ... but seriously, do I talk funny or something?

wdbdy2000s4
10-21-2009, 11:36 AM
Idk if it was the bad reception on my cell phone or all the background noise in the shop but I couldn't understand anything. haha.

From what I gathered you were very nice. Everyone I've been in contact with over there was cool. Good prices and great work. keep it up. [up]

blackbenzz
10-21-2009, 12:07 PM
Hey hey guys, what's this about me being hard to understand?! It's not my fault my vocabulary is too technical for some of you! ;) J/K ... but seriously, do I talk funny or something?

Must be the canadian accent [confused]

audirs
10-21-2009, 12:13 PM
Must be the french canadian accent [confused]

fixed [:)]

98a4
10-21-2009, 01:08 PM
I think this build has convinced me to dump the money into an Agtronic kit. Price is right.
I'll start my build in a few months when I'm back in PA.

blackbenzz
10-21-2009, 01:24 PM
I think this build has convinced me to dump the money into an Agtronic kit. Price is right.
I'll start my build in a few months when I'm back in PA.

Just curious. How did this thread convince you? The car isn't even running yet [confused]

Don Supreme
10-21-2009, 01:25 PM
I think this build has convinced me to dump the money into an Agtronic kit. Price is right.
I'll start my build in a few months when I'm back in PA.

Where is said price listed?

Evilevo
10-21-2009, 01:45 PM
Where is said price listed?

He called Agtronic, Sean, if you want to know the price just let me know.


Just curious. How did this thread convince you? The car isn't even running yet [confused]

pssh, my car doesnt have to be running to impress people [>_<]

blackbenzz
10-21-2009, 02:01 PM
pssh, my car doesnt have to be running to impress people [>_<]

Haha I see!

98a4
10-21-2009, 02:22 PM
Just curious. How did this thread convince you? The car isn't even running yet [confused]

Car running doesn't have anything to do with it? Like it's not going to run....??

I have the means to do it at this point in my life and was debating VR or GT's, after speaking with Agtronic, and watching this thread, GT's for me.

Mrsfourrings
10-21-2009, 04:25 PM
Car running doesn't have anything to do with it? Like it's not going to run....??

I have the means to do it at this point in my life and was debating VR or GT's, after speaking with Agtronic, and watching this thread, GT's for me.


I'd say wait for Adam's car to break in and post dyno #'s and plots, remember he's not using the basic GT28 turbos that the kit comes with...make sure you discuss your needs w/Agtronic and the turbos they provide before you make a decision. Also remeber the VR swap is a new one as more people do that conversion pricing on parts will adjust as necessary, as will power levels. Just my .02

98a4
10-21-2009, 04:32 PM
Between Adam and Guru, I think I'll see all I need to. I have a built schimmel 12v block laying around, but something is so beautiful about a GT S4 to me.

Evilevo
10-21-2009, 04:43 PM
Between Adam and Guru, I think I'll see all I need to. I have a built schimmel 12v block laying around, but something is so beautiful about a GT S4 to me.

Im on GT2871R-2, with a 2.8L, Guru is on 2860RS with a 3.0L

While i agree with both you and Anthony, I would wait till my car is running to decide on what turbos you want.

wdbdy2000s4
10-21-2009, 04:54 PM
There are a lot of GT s4s out there. Talk to simmply, mark@autospeed, mike@vast, and other big players in the game. They are all fully aware of the potential of the different 28 variants since they have tuned several different setups. IIRC Mark said he has tuned over 25 GT cars.

Evilevo
10-21-2009, 05:14 PM
There are a lot of GT s4s out there. Talk to simmply, mark@autospeed, mike@vast, and other big players in the game. They are all fully aware of the potential of the different 28 variants since they have tuned several different setups. IIRC Mark said he has tuned over 25 GT cars.

+1, Mike at VAST is tuning my car [up]

AudiSportB5S4
10-21-2009, 05:59 PM
+1, Mike at VAST is tuning my car [up]

Damn right he is! [:p] [race]

Evilevo
10-21-2009, 06:04 PM
Damn right he is! [:p] [race]

Speaking of that. He asked me to email him the part numbers for my turbos. I think he was going to edit the base file and send it to me because they are GT2871R-2 instead of GT2860RS, and i never got a response from them after i sent that email

Homebrewguy
10-21-2009, 06:39 PM
I'd say wait for Adam's car to break in and post dyno #'s and plots, remember he's not using the basic GT28 turbos that the kit comes with...make sure you discuss your needs w/Agtronic and the turbos they provide before you make a decision. Also remeber the VR swap is a new one as more people do that conversion pricing on parts will adjust as necessary, as will power levels. Just my .02

iam slow...

Evilevo
10-21-2009, 06:49 PM
iam slow...

We know that [>_<] But what does that have to do with Msfourrings post?

AudiSportB5S4
10-21-2009, 06:58 PM
Speaking of that. He asked me to email him the part numbers for my turbos. I think he was going to edit the base file and send it to me because they are GT2871R-2 instead of GT2860RS, and i never got a response from them after i sent that email

hmm, I'll give a call tomorrow for ya, you should get a response [up]

Mrsfourrings
10-21-2009, 06:59 PM
iam slow...
What's up Dwane? My cars are all slow....but look good [drive] LOL,
where have you been hiding?

Mrsfourrings
10-21-2009, 07:16 PM
iam slow...

Ha we're all slow esp modded 1G 4G63 DSM's J/K

Evilevo
10-21-2009, 08:37 PM
More Pictures!! Markku is trying to have the kit shipped out tomorrow so I can have it for the weekend, but at this point, Id rather him take a bit longer and make sure everything is perfect and wait a week. ANYway, on to the glorious pics!!!
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20023.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20024.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20025.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20026.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20027.jpg
Yes that is open WG [evilsmile]
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20029.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20030.jpg
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20031.jpg

98a4
10-21-2009, 08:50 PM
Adam, I'm in York and think I need a ride in this thing before I dump 15k. Spooled1.8 here in york also is doing 605's any guesses on how many cars you'd put on him? :)

LOVE the pics, and where the WG terminate. You're doing exactly what I have in mind. Are those DP's just for mock up?

Evilevo
10-21-2009, 08:59 PM
Adam, I'm in York and think I need a ride in this thing before I dump 15k. Spooled1.8 here in york also is doing 605's any guesses on how many cars you'd put on him? :)

LOVE the pics, and where the WG terminate. You're doing exactly what I have in mind. Are those DP's just for mock up?

Not sure. There is a video floating around of Simmply on racegas vs a stage 3 car. http://www.youtube.com/watch?v=r4kTR0SdbOY I would expect 605s to be right around RS6ss.

Not sure about the DPs, i know they are making me DPs also, and Inlets

AMC
10-21-2009, 10:56 PM
looks slow adam. id be afraid to put that in ur car so might as well throw them i nthe garbage (my trunk) and ill dispose of them properly

Homebrewguy
10-21-2009, 11:07 PM
We know that [>_<] But what does that have to do with Msfourrings post?

the quote didnt mean anything, but iam still SLOW.....

Don Supreme
10-22-2009, 09:11 AM
Im on GT2871R-2, with a 2.8L, Guru is on 2860RS with a 3.0L

While i agree with both you and Anthony, I would wait till my car is running to decide on what turbos you want.

WTF Adam..

2871s!! oh my.

Don Supreme
10-22-2009, 09:15 AM
Got the text...

What A/R exhaust?

blackbenzz
10-22-2009, 09:16 AM
Damn thats pretty badass [drive]

Evilevo
10-22-2009, 09:18 AM
What you can't respond to my texts? Lol. .64AR TiAL housing. The 56 trim 2871s. 743347-2

Spooled1.8
10-22-2009, 01:17 PM
Adam, I'm in York and think I need a ride in this thing before I dump 15k. Spooled1.8 here in york also is doing 605's any guesses on how many cars you'd put on him? :)

LOVE the pics, and where the WG terminate. You're doing exactly what I have in mind. Are those DP's just for mock up?

Hey now, I'm on stock block! I'm down for running anyone when the time comes. Now I just got to get off my ass and start ordering this shit [:p]

Evilevo
10-22-2009, 01:31 PM
Hey now, I'm on stock block! I'm down for running anyone when the time comes. Now I just got to get off my ass and start ordering this shit [:p]

Haha, im not trying to set it up. Your buddy is [>_<]

GURUMAN
10-22-2009, 03:30 PM
Adam, I saw your kit today...

I'm jaleous...[mad]

If ever it lags too much for ya, I'll sell you my kit and take yours in exchange...[;)]

Evilevo
10-22-2009, 03:36 PM
Adam, I saw your kit today...

I'm jaleous...[mad]

If ever it lags too much for ya, I'll sell you my kit and take yours in exchange...[;)]

Thanks man! Im not really too worried about Lag. All these people worried about lag are just scared of real power [evilsmile]

Did Markku talk to you about helping me out and using your car to make me a catback?

GURUMAN
10-22-2009, 04:02 PM
Thanks man! Im not really too worried about Lag. All these people worried about lag are just scared of real power [evilsmile]

Did Markku talk to you about helping me out and using your car to make me a catback?

No but I really dont mind...

My car is out for the season...

Evilevo
10-22-2009, 04:07 PM
No but I really dont mind...

My car is out for the season...

If you could that would be a huge help. [up] That way i dont have to drive around open DPs till i can get to a shop for them to fabricate a catback for me. I also trust Markku more to make it right than some random shop down here.

s2the4
10-22-2009, 04:53 PM
[QUOTE=Evilevo;4405725]More Pictures!! Markku is trying to have the kit shipped out tomorrow so I can have it for the weekend, but at this point, Id rather him take a bit longer and make sure everything is perfect and wait a week. ANYway, on to the glorious pics!!!
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20023.jpg

I just splooged all over my laptop and wall, Adam! that thing is going to be a beast! will it be done before the MIR track rental? [up]

puz84
10-23-2009, 12:15 PM
thats a great build, cant wait for those dyno plots!

APBS4
10-23-2009, 12:45 PM
who will tune this car???

wdbdy2000s4
10-23-2009, 01:37 PM
^
...


+1, Mike at VAST is tuning my car [up]

APBS4
10-23-2009, 02:12 PM
ohh i thought there was something to do with ssp.

blackbenzz
10-23-2009, 02:15 PM
ohh i thought there was something to do with ssp.

That was the old turbo setup, you're falling behind [>_<]

Evilevo
10-23-2009, 04:22 PM
More Pictures!! Markku is trying to have the kit shipped out tomorrow so I can have it for the weekend, but at this point, Id rather him take a bit longer and make sure everything is perfect and wait a week. ANYway, on to the glorious pics!!!
http://www.agtronicmotorsport.com/gallery/adam_s4/Adam%20S4%20023.jpg

I just splooged all over my laptop and wall, Adam! that thing is going to be a beast! will it be done before the MIR track rental? [up]

Which track rental? It wont be done for the one next week, but it will be done for the next one. I am almost positive that after break in I am going to drive to VAST to have them tune the car in person.

csre9
10-24-2009, 08:35 AM
Good shit[up]
Glad to see it progressing

revhards4
10-24-2009, 04:12 PM
Which track rental? It wont be done for the one next week, but it will be done for the next one. I am almost positive that after break in I am going to drive to VAST to have them tune the car in person.

Mike and Kurt are going to tune the shit outta that!!![hail]

B5stgIII
10-24-2009, 07:58 PM
looks beautiful.

Evilevo
10-25-2009, 12:27 AM
Thanks guys!

Evilevo
10-25-2009, 09:47 PM
Took a couple pics while i was dropping off some parts. Sorry, with my phone.

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0050.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0053.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0052.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0054.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0055.jpg

Trigger Happy
10-26-2009, 07:49 AM
Is that the VIP baller section of the garage? lol

Mrsfourrings
10-26-2009, 07:50 AM
Took a couple pics while i was dropping off some parts. Sorry, with my phone.

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0050.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0053.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0052.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0054.jpg

http://i120.photobucket.com/albums/o169/ajbortz/Uploads%20via%20Pixelpipe/IMAG0055.jpg

You know someone's going to say stop snooping![;)]

Evilevo
10-26-2009, 08:42 AM
Haha. Already talked to him. He knows. I asked before I put the pics up.

Evilevo
10-27-2009, 08:36 AM
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4033.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4034.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4035.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4036.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4037.jpg

Mrsfourrings
10-27-2009, 08:54 AM
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4033.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4034.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4035.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4036.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4037.jpg

DTM couldn't duplicate that quality!!!! Looks amazing!!![hail]

S4-ORCE
10-27-2009, 11:24 AM
Awesome!

Don Supreme
10-27-2009, 11:50 AM
The exhaust wheels look so nice..

That thing is going to make big HP, but probably be uber laggy.... (Of course in your typical roll race / highway pull obsession, you will be king).

Are you going to launch this setup Adam?

puz84
10-27-2009, 12:26 PM
fkcn sick!

Evilevo
10-27-2009, 12:57 PM
LOL, you know me mang. I had my fun with drag racing when I had my Evo. VAST is saying it should kick real hard around 5k. So 5k-5500 to 8200ish is still a pretty decent powerband. Of course I didn't really want turbos this large to begin with, I wanted GT2860RS but DTM fucked me over on that point. If I really hate how it drives, I can either pull it and swap turbos or just sell the car and go buy that C6 Z06 I want [evilsmile]



The exhaust wheels look so nice..

That thing is going to make big HP, but probably be uber laggy.... (Of course in your typical roll race / highway pull obsession, you will be king).

Are you going to launch this setup Adam?

Matador
10-27-2009, 01:02 PM
LOL, you know me mang. I had my fun with drag racing when I had my Evo. VAST is saying it should kick real hard around 5k. So 5k-5500 to 8200ish is still a pretty decent powerband. Of course I didn't really want turbos this large to begin with, I wanted GT2860RS but DTM fucked me over on that point. If I really hate how it drives, I can either pull it and swap turbos or just sell the car and go buy that C6 Z06 I want [evilsmile]

Nah, CTS-V. Remember, "4 doors for more whores."

[:p]

Besides, since you went V-bands couldn't you just downsize the turbos easy?

Evilevo
10-27-2009, 01:28 PM
Nah, CTS-V. Remember, "4 doors for more whores."

[:p]

Besides, since you went V-bands couldn't you just downsize the turbos easy?

I would prolly have to pull the motor. But it really depends. I guess we will see fitment and placement when the motor is in the car

Matador
10-27-2009, 01:46 PM
Yeah, I guess "easy" is too loose of a term. haha!

Dr.Duct
10-27-2009, 05:53 PM
Looks good adam!

haus4
10-27-2009, 07:36 PM
That is some pro fabbing. Looks great adam. Cant wait to see her running.

highPSI-S4
10-27-2009, 07:54 PM
Ah, skeet skeet. That thing look purty.


Coming together real nice Adam. Good to see another S4 project done.

GURUMAN
10-27-2009, 08:30 PM
That is some pro fabbing. Looks great adam. Cant wait to see her running.

Markku is the King [wrench]

viperbl
10-28-2009, 02:43 AM
Markku is the King [wrench]

x2

I want to change mine for a vband kit now!! [:D]

revhards4
10-28-2009, 02:59 AM
LOL, you know me mang. I had my fun with drag racing when I had my Evo. VAST is saying it should kick real hard around 5k. So 5k-5500 to 8200ish is still a pretty decent powerband. Of course I didn't really want turbos this large to begin with, I wanted GT2860RS but DTM fucked me over on that point. If I really hate how it drives, I can either pull it and swap turbos or just sell the car and go buy that C6 Z06 I want

I want a ZO6 too! They are just soooo fast outta the box it's scary!

Evilevo
10-28-2009, 10:26 AM
Thanks guys! I was very impressed with the craftmenship i saw out of Agtronic from Guru's car and the kit for Jibber. And I have not been dissapointed with it for my kit! Markku has been extremely helpful and the customer service is amazing!!


I want a ZO6 too! They are just soooo fast outta the box it's scary!

Ya, i know. I have driven one. It is sick nasty, i just dont think i could give up the 4 doors [up]

PKmode
10-28-2009, 11:16 PM
[o_o][o_o]Damn,[eek] Nice set up!...This is going to be nasty!!! I am excited to see the results.

Evilevo
10-29-2009, 12:59 PM
Some more pictures. Kit will be done today and shipped out tomorrow via Overnight or Same Day so we can install it this weekend. Hopefully no more problems.

http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4046.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4047.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4048.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4050.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4051.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4052.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4056.jpg

PKmode
10-29-2009, 01:16 PM
Has this all been test fitted yet? I know my car had the engine in and out over a dozen times. I hope it all goes smoothly for you.

It looks like a killer set up for certain and the AMD guys were saying the 770s actually spooled earlier than the 650s (crazy).

I'm subscribing to this thread. Keep us posted on this beast. Best of luck.

Evilevo
10-29-2009, 01:18 PM
Has this all been test fitted yet? I know my car had the engine in and out over a dozen times. I hope it all goes smoothly for you.

It looks like a killer set up for certain and the AMD guys were saying the 770s actually spooled earlier than the 650s (crazy).

I'm subscribing to this thread. Keep us posted on this beast. Best of luck.

These were all made on Agtronics motor up there. It should fit fine, i would assume. Whose kit are you using?

PKmode
10-29-2009, 01:22 PM
I meant in a car, I saw the engine pics. I'm sure you'll be fine and they took measurements.

My car is the original ASP GT25R2 car.

jibberjive
10-29-2009, 01:22 PM
What diameter are the inlets? And are they polished aluminum or what? Looks good!

Evilevo
10-29-2009, 01:24 PM
I meant in a car, I saw the engine pics. I'm sure you'll be fine and they took measurements.

My car is the original ASP GT25R2 car.

Did you install the kit or did ASP? Are you saying ASP had the motor in and out for test fitting? Agtronic makes kits and ships them out. Just like the ARD kits

PKmode
10-29-2009, 01:26 PM
ASP did. They had issues and learned early on they needed to do the divorced WGs and had to make revisons etc. Who's doing your install?

Evilevo
10-29-2009, 01:29 PM
ASP did. They had issues and learned early on they needed to do the divorced WGs and had to make revisons etc. Who's doing your install?

Me, Blackbenzz, and LowFlyer are doing my install.

viperbl
10-29-2009, 02:17 PM
I meant in a car, I saw the engine pics. I'm sure you'll be fine and they took measurements.

My car is the original ASP GT25R2 car.

They have an engine setup there to build the kits on that, I live in the UK and had mine shipped over here, fitted them myself with very little hassle, so I am positive he will be fine :)

Evilevo
10-29-2009, 02:21 PM
What diameter are the inlets? And are they polished aluminum or what? Looks good!

They are 2.25" They are Polished SS i think. Thanks Buddy!


They have an engine setup there to build the kits on that, I live in the UK and had mine shipped over here, fitted them myself with very little hassle, so I am positive he will be fine :)

Thanks man! Hows your car doing? You get it up again? BTW, do you have any logs of your car?

PKmode
10-29-2009, 02:23 PM
They have an engine setup there to build the kits on that, I live in the UK and had mine shipped over here, fitted them myself with very little hassle, so I am positive he will be fine :)

Very cool.[cool][up]

viperbl
10-29-2009, 02:24 PM
Thanks man! Hows your car doing? You get it up again? BTW, do you have any logs of your car?

More logs that I know what to do with! I will email you some in a min

Not yet, but everything is coming together, so should have it running in a month or so I hope :)

Evilevo
10-29-2009, 02:31 PM
More logs that I know what to do with! I will email you some in a min

Not yet, but everything is coming together, so should have it running in a month or so I hope :)

Awesome! Thanks man! I am very curious as to how these turbos are going to run. Cause what you say for spool and what ARD says for spool are different. But watching that video of yoru car from a 40 in second gear, there doesnt look like much lag at all. It just takes the F off! [hail]

Evilevo
10-30-2009, 05:46 PM
Being test fitted in their front clip.....
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4057.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4058.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4059.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4060.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4061.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4062.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4064.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4065.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4066.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4068.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4069.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4070.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/AdamS4Panorama1.jpg

Cant wait to get the kit tomorrow and start installing everything back in the car! It has been down way to long(10 Months) and I am very excited to see everything so close to coming together again. [up]

Huge thanks to Markku and Agtronic for spending the extra time when needed to get the kit done by when they said.[hail]

BENI_BOY
10-31-2009, 10:47 AM
shit even im excited! cant wait[up]

Spooled1.8
10-31-2009, 12:17 PM
It's a work of art!

Evilevo
10-31-2009, 04:48 PM
Thanks guys! Taking a break from working on it right now too eat. Got the flywheel and clutch on. Bolting up the trans now. Than bolting on the turbo kit and all the lines. And preparing to put it in the car. Going to try and get the motor in the car tonight and finish everything up tomorrow and start it! I have a lot of pictures and will post them later tonight.

viperbl
10-31-2009, 04:51 PM
Thanks guys! Taking a break from working on it right now too eat. Got the flywheel and clutch on. Bolting up the trans now. Than bolting on the turbo kit and all the lines. And preparing to put it in the car. Going to try and get the motor in the car tonight and finish everything up tomorrow and start it! I have a lot of pictures and will post them later tonight.

Double and triple check those turbo oil and water lines dude :)

And best of luck man!

Morphin
10-31-2009, 05:28 PM
Awesome setup you have there.

haus4
10-31-2009, 05:55 PM
Sweet, keep working man. Its going to be sick when you finally get to start her up. Those welds look amazing.

DceptvS4
10-31-2009, 06:00 PM
I cant wait to see this beast run! [up][up]

mwebb
10-31-2009, 07:20 PM
when you get this done u shld get another gtg at towson i wanna see this thing

Evilevo
10-31-2009, 11:58 PM
Thanks guys! I just got home from the shop. Had some problems with the coolant return lines, but I have an idea of what to do for that.
Here are some pics from today.

Rear Main Seal on
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3443.jpg
A NICE!!
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3445.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3446.jpg
Flywheel on
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3448.jpg
Clutch on
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3452.jpg
Have to grind away for clearance
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3459.jpg
Grinded away
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3472.jpg
Motor and trans together
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3473.jpg
Test fitting the turbo
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3489.jpg
Grinding away another stupid piece for clearance
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3491.jpg
Mounted up and hooking up all the oil and coolant lines
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3495.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3497.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3499.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3500.jpg
http://i120.photobucket.com/albums/o169/ajbortz/S4/IMG_3508.jpg

Evilevo
10-31-2009, 11:59 PM
when you get this done u shld get another gtg at towson i wanna see this thing

We will definitely be having more Towson meets, whether my car is done or not. But hopefully it should be running before the next one(next monday, most likely)

maniac33
11-01-2009, 12:08 AM
Dang man! I wanna hear this thing and see it running already!!! haha. And if you're feeling gracious enough take me for a spin when its done!![:p]

Don Supreme
11-01-2009, 06:32 AM
Aren't you going to coat the exhaust manis?

Evilevo
11-01-2009, 06:36 AM
No. I talked to Agtronic about it, he doesn't recommend coating it because of the extra heat during coating will weaken the manifolds.

Haenszel20v
11-01-2009, 06:50 AM
Coating causes premature cracking.

Don Supreme
11-01-2009, 06:51 AM
sure, but those valve cover gaskets wont be too happy.

Haenszel20v
11-01-2009, 06:53 AM
sure, but those valve cover gaskets wont be too happy.

I wouldn't be worried about valvecover gaskets. I'd be more worried about the expensive and difficult things.

GURUMAN
11-01-2009, 08:12 AM
Where's tha beers ?
http://www.delriomexicanrestaurant.com/images/corona.jpg

Agtronic
11-01-2009, 08:14 AM
Looking good Adam! It's weird about the piece you had to cut off on the driver side, I don't remember ever having to clearance anything on that side. My test engine is actually made up of a 3.0L aluminum block, so I can't compare ... I'll definitely keep an eye out next time I have an S4 in the shop.

As for the coatings, if they are done INSIDE and OUT, it is less of a problem, but you really have to have them done by someone who knows what they are doing. Only coating the outside keeps the heat inside, and can overheat the material. Of all the exhaust manifolds I have ever made, 2 have cracked. One was coated (outside only) and one was wrapped. Yes, it could be coincidence, but after researching the subject I honestly believe it's a touchy subject. Most manifold manufacturers will not warranty coated units.

Europowerhaus
11-01-2009, 09:55 AM
I wouldn't be worried about valvecover gaskets. I'd be more worried about the expensive and difficult things.

Yea...cause loss of oil pressure and oil fires are sweet[rolleyes]...evo, just make a small wrapped or coated (they sell ceramic heat spray) plate to block that area by the valve cover gasket...Sweet build man[up]

Agtronic
11-01-2009, 12:03 PM
Yea...cause loss of oil pressure and oil fires are sweet[rolleyes]...evo, just make a small wrapped or coated (they sell ceramic heat spray) plate to block that area by the valve cover gasket...Sweet build man[up]

Oil pressure? I've never had a heat issue with these manifolds, and I've made a lot of them.

Mrsfourrings
11-01-2009, 08:35 PM
After seeing thae manis first hand, I would follow the suggestion of Marrku. We instead did wrap the downpipes, and insulated coolant lines and routed oil lines as beat as possible away from the heat. Adam I am aure will post pics up later tonight as the motor is virtually ready to be dropped on the car.

Evilevo
11-01-2009, 08:49 PM
I am taking the pictures off the camera right now and uploading them. Will post them in a second. We got alot done this weekend and I am very happy with what we got done.

Markku, i cant thank you enough for all the help you have provided and all the phone calls after hours about everything. The kit is amazing and i cant wait to get everything broken in and start making some power!

Evilevo
11-01-2009, 09:14 PM
Ok, so here are the pictures. Basically, stock coolant returns line didnt reach so we had to make some custom ones. Big thanks to Tim(warewolves) and Anthony(msfourrings) for the help and "diagonal" thinking. [>_<] And to Ahmad(Blackbenzz)
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3511.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3512.jpg
This is part of the line we made.
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3513.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3517.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3518.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3519.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3521.jpg
You can see the line here. We got heat shielding covers for the lines.
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3522.jpg
With the motor mount on.
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3533.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3534.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3535.jpg
Heat wrapped the downpipes
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3536.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3539.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3541.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3542.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3544.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3547.jpg
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3548.jpg
We got all the accessories on, timing belt covers, pulleys and tensioner for the serpentine belt on. Need to look up the routing for the serpentine belt and than put than on.
http://i120.photobucket.com/albums/o169/ajbortz/Build%20Part%202/IMG_3560.jpg
Still need to get some couplers for the stock Charge piping off the turbos to mate up to the GTs and get a gasket for the stock oil cooler. But besides that stuff, we are pretty much ready to drop the motor back in the car and start hooking up all the other small stuff! [:D]

AMC
11-01-2009, 11:53 PM
damn almost done dude nice gl!

TRANS4M
11-02-2009, 05:30 AM
almost done!!

Sales@RAI
11-02-2009, 06:25 AM
that motor is such a mess, I'd go crazy trying to find little things

AudiSportB5S4
11-02-2009, 07:56 AM
Nice Adam, glad to see it coming together! Take some pics of those bi-pipes mounted up :) haha.

S4evr
11-02-2009, 08:42 AM
looks amazing with those v-bands and that sweet waste gate dump [:D]

Evilevo
11-02-2009, 11:17 AM
Thanks guys. Gotta figure out the exhaust now. Agtronic told me how to route and what size piping to use. Now i just need to figure out what mufflers i want to use, going to use 2 to keep sound down until WOT when the WGs open. I dont really want to leave the car at a shop once it is completed, but i cant run around open DPs everywhere. I am also going to get Track Density motor/trans mounts, rear diff carrier and the rear diff plate from 034.

blackbenzz
11-02-2009, 11:37 AM
that motor is such a mess, I'd go crazy trying to find little things

Imagine bolts everywhere (not put in bags and labelled like they are supposed to) and trying to figure out what bolts go where. Yea, NOT fun and a MAJOR PITA. There have been several bolts missing so far, which made for some trips to the store. I will never do this again

Don Supreme
11-02-2009, 11:39 AM
Imagine bolts everywhere (not put in bags and labelled like they are supposed to) and trying to figure out what bolts go where. Yea, NOT fun and a MAJOR PITA. There have been several bolts missing so far, which made for some trips to the store.

You are in on this too Ahmad?

PKmode
11-02-2009, 11:39 AM
Coming along nicely.

Once those WGs open, you won't even hear your exhaust.[>_<]

blackbenzz
11-02-2009, 11:43 AM
You are in on this too Ahmad?

Unfortunately yes. He never did mention that huh?

Don Supreme
11-02-2009, 11:50 AM
He most certainly did not. I think Ahmad secretly wants an S4.

blackbenzz
11-02-2009, 12:02 PM
He most certainly did not. I think Ahmad secretly wants an S4.

Yea I feel the love and appreciation. I had an S4 and will probably never have one again.

wdbdy2000s4
11-02-2009, 12:08 PM
Unfortunately yes. He never did mention that huh?

he mentioned it like 3x...read the thread noob.lol [:p]

Evilevo
11-02-2009, 12:24 PM
Unfortunately yes. He never did mention that huh?

Haha, your help has been mentioned and appreciated!

blackbenzz
11-02-2009, 01:18 PM
Haha I'm too lazy to read that far back. You're welcome Adam [up]

werewolves182
11-02-2009, 02:39 PM
It was a lot of fun working on your motor over the weekend, a Halloween well spent. Guess I left the shop in time to avoid the mass confusion with all the unlabeled bolts.

Did you end up working late last night and coming back to Towson this morning?

s2the4
11-02-2009, 02:52 PM
looking good Adam more pictures !!!!!!!!

Evilevo
11-02-2009, 04:06 PM
It was a lot of fun working on your motor over the weekend, a Halloween well spent. Guess I left the shop in time to avoid the mass confusion with all the unlabeled bolts.

Did you end up working late last night and coming back to Towson this morning?

Ya, thanks alot man. I really appreciate it! You should come back next weekend when we are putting it in the car, and you can hear it start up!

Naw, we left at like 10pm last night, and i came back up to Towson last night. Ill be heading back thursday night though and Anthony and I are going to get everything ready on friday morning so hopefully Ahmad can come after work and we can start putting it in the car. And we are going to install the BBK on friday too

Evilevo
11-02-2009, 04:07 PM
looking good Adam more pictures !!!!!!!!

Thanks Cyrus! I dont have anymore pictures of what we did. I will be taking more as we are putting it in the car and hooking everything up. Will also be taking pictures of the BBKs as those are being installed!

wdbdy2000s4
11-02-2009, 04:45 PM
Will also be taking pictures of the BBKs as those are being installed!

can you write up a how to? Some of the noobs will probly get confused when they try to hook up the 2 mounting bolts and 1 brake line per corner.[>_<]

on a serious note, it looks good. Can't wait to come down and see it run.

Mrsfourrings
11-02-2009, 04:46 PM
He most certainly did not. I think Ahmad secretly wants an S4.

Ahmad knows he needs a Stg 3 Noggy!!! lol

Evilevo
11-02-2009, 04:59 PM
can you write up a how to? Some of the noobs will probly get confused when they try to hook up the 2 mounting bolts and 1 brake line per corner.[>_<]

on a serious note, it looks good. Can't wait to come down and see it run.

Haha, honestly, there are some modifications that need to be made to fit the JHM BBK. For the 034 rear BBK there isnt anything special

Evilevo
11-02-2009, 05:00 PM
Ahmad knows he needs a Stg 3 Noggy!!! lol

Haha, Ahmad already said the only way he would get another S4 would be Built motor GT28, stage 3 is too slow

werewolves182
11-02-2009, 07:47 PM
Ya, thanks alot man. I really appreciate it! You should come back next weekend when we are putting it in the car, and you can hear it start up!

Naw, we left at like 10pm last night, and i came back up to Towson last night. Ill be heading back thursday night though and Anthony and I are going to get everything ready on friday morning so hopefully Ahmad can come after work and we can start putting it in the car. And we are going to install the BBK on friday too

No problem. I'll probably head over Friday afternoon after my class to help put the motor in. Can't wait to hear that thing roar.

Are you planning on installing the BBK before or after putting the engine in?

Evilevo
11-02-2009, 07:50 PM
No problem. I'll probably head over Friday afternoon after my class to help put the motor in. Can't wait to hear that thing roar.

Are you planning on installing the BBK before or after putting the engine in?

Most likely before. I am going to get there early on friday and start doing that. We gotta pull the axles off so the the wheels are gonna come off anyway. Ahmad doesnt get off work till like 5 or so, so not gonna start installing till we have multiple hands.

werewolves182
11-02-2009, 08:08 PM
Most likely before. I am going to get there early on friday and start doing that. We gotta pull the axles off so the the wheels are gonna come off anyway. Ahmad doesnt get off work till like 5 or so, so not gonna start installing till we have multiple hands.

I get out of class at 12:45 so I'll probably catch some of the brake installation depending on what time you guys start working on it.

Evilevo
11-02-2009, 08:10 PM
I get out of class at 12:45 so I'll probably catch some of the brake installation depending on what time you guys start working on it.

Aight, cool! [up]