View Full Version : PLEASE HELP! Wiper motor?

03-25-2009, 09:29 PM
Ok so my headlight switch went out this week, which made my headlight not work..Well after 2 days my wipers would only work on high. So I changed both the headlight switch and the wiper side. Well the headlight work now, but the wiper only work on high and my headlight washer don't work anymore. What would make my wipers only work on high and headlight washer not work?

Please help and I thank you!

03-25-2009, 09:51 PM
I would start by replacing the entire stalk on the steering column.

03-25-2009, 09:53 PM
I did today! Both side!

03-25-2009, 10:11 PM
may be the timings of both the things is not maintain.keep proper timings of wiper and headlight.

03-25-2009, 10:15 PM
So both wiper stalks could be broken?

03-26-2009, 07:20 AM
Bump please help!

03-26-2009, 11:05 AM
hey, don't mean to jack the thread but i got the same problem too, well my wiper would make one complete move then stop. Then it won't come on anymore, the motor is fine because i hard it wired directly to the battery. I am thinking i might need to change the wiper regulator

03-26-2009, 06:35 PM
Well mine only works on high and my headlight washers don't work anymore

03-26-2009, 07:21 PM
headlight washers could be the pump for them went bad, also note that they only come on when your headlight is on. as for the wiper speed, i have no idea.

03-27-2009, 09:16 AM
I turned the headlight on and the headlight washer still don't work.

03-27-2009, 09:20 AM
Check the wiper arm mechanism because they can seize up