PDA

View Full Version : can someone tell me how...pic included



wesleyfbm
03-16-2009, 12:09 PM
to get these two white pieces connected again? dont know haw it popped out but its making my headlights shake. thank you

http://i488.photobucket.com/albums/rr243/wesleyfbm/001-1.jpg

seanriv
03-16-2009, 12:39 PM
Same thing happened to me. I still have not fixed it, think you have to take the housing apart to fix it. Anyone else have a better idea?

jaustin
03-16-2009, 12:49 PM
looks like it almost has to be slid into place.

wesleyfbm
03-16-2009, 12:54 PM
yah ive been trying to slide it in but there just isnt enough slack to move around and get in there far enough.

LEGO
03-16-2009, 06:13 PM
That's what he said! Sorry....

01_A4_Black
03-16-2009, 06:39 PM
It is possible but you have to play with it for a bit. I think I got mine by pushing the ball end as far in as it will go and trying to rear in and pull the reflector out. Good luck as it is a pain.

ZB4rngs
03-16-2009, 06:53 PM
I got mine back in by running the headlight aiming adjuster back in, then re clipping it back.....you'll have to re aim the lights though.

jrodmk2
03-17-2009, 07:15 AM
^^^^you have to use the other adjuster to get the smaller amount of slack. hten readjust after you put them back in the car. just did this a couple of weeks ago. headlights were not in the car.

wesleyfbm
03-17-2009, 10:50 AM
welp problem solved. my thanks go out to zb4rngs and jrodmk2. they were right it is the adjuster screw!

B5A4Kevin
03-17-2009, 11:50 AM
good job. i would have said just to push on it really hard until it ALMOST breaks.








...im not always right...