PDA

View Full Version : Pic Request!



01audia4
03-12-2009, 06:05 AM
Hey, i searched around didn't see much, so ill just post here.

Does anyone have pictures with 10MM spacers, 18x8(225x40x18) ET 35? Ive been trying to decide if i should get 10,8, or 5 MM spacers and have not seen enough pictures, i just cant find enough.

A4 S4 i do not care!

Also do spacers really effect your driving/cornering handling?

Tifun
03-12-2009, 06:18 AM
I have et37 with 10mm in the front and back on 18x8 in this pic. So that's = to 8mm for your sake. Now I ran 10mm front and 15mm back up until last week when I lowered her some more. Now I run 10mm back nothing up front. I haven't noticed any issues at all with handling, doesn't feel any different to me on the street.

http://farm4.static.flickr.com/3155/2897249684_01e695e574_b.jpg

01audia4
03-12-2009, 09:44 AM
So is 8 to 10 that much more of a difference? Anyone have more pictures. Trying to order my bilsteins and Spacers right now.

Also: Our cars need the Hub Centric Spacers correct?

akielb
03-12-2009, 12:02 PM
You need hub centric rings if the wheels you ordered don't have a Bore of 57.1mm most wheels have a 66mm or 7?mm I think - the ring makes up the difference

njm23
03-12-2009, 12:07 PM
So is 8 to 10 that much more of a difference? Anyone have more pictures. Trying to order my bilsteins and Spacers right now.

Also: Our cars need the Hub Centric Spacers correct?

8-10mm isnt much, but noticeable to a point. You need hub centric spacers yes, same concept as having the correct hub for the rim..

Tifun
03-12-2009, 02:43 PM
I have ECS 15mm and H&R 10mm, both sets are hub centric. I actually like the ECS ones better, they have a nicer finish. Both are nice though. I didn't have any rubbing issues until I went lower to just above 23" I was worried about clipping my fenders. I personally don't think you are going to notice any difference in the feel of the car.