Factory RS4 rims on B6 S4?

[OhFourS4]

I recently got my hands on a set of factory RS4 rims mounted with 255/35/19 Pirelli PZero Corsas. I've got a stock B6 S4 and am hoping this wheel / tire combo will fit. I believe there may be an issue with the offset. Any thoughts?

Thanks!

[inhoc]

I recently got my hands on a set of factory RS4 rims mounted with 255/35/19 Pirelli PZero Corsas. I've got a stock B6 S4 and am hoping this wheel / tire combo will fit. I believe there may be an issue with the offset. Any thoughts?

Thanks!

If they don't fit, I would interested in purchasing the wheels. I believe they are a ET29.

[ewuzh]

I believe they are 19x9 ET29. With 255's you will likely have to roll the front fenders or go with a slighter narrower tire (245 or maybe 235) to avoid rubbing.

[vinny.dtw]

http://lh5.ggpht.com/_6Z8R3DRztNo/SXQEVLCMXcI/AAAAAAAABL0/Hp21iVc8nqM/s640/Sidewall.jpg

http://lh3.ggpht.com/_6Z8R3DRztNo/SXQEUHtyHpI/AAAAAAAABLs/IAedKo83adc/s640/Restaurant%20Front.jpg

Itll work with the right tire setup.

19x9 et 29 wrapped with 225/35/19 front, and 235/35/19 rears. Minimal rub, only over HUGE speed bumps. Make sure you do your research on the tires, as some of them run wider then others.

[OhFourS4]

Winny, thanks for the info, really nice B&W photo. Is your car lowered?

Chris



Itll work with the right tire setup.

19x9 et 29 wrapped with 225/35/19 front, and 235/35/19 rears. Minimal rub, only over HUGE speed bumps. Make sure you do your research on the tires, as some of them run wider then others.

[vinny.dtw]

Chris,

Yes I'm about 24.75 fender to floor for my front, and about 25.25 fender to floor for the rear.