View Full Version : quick RS4 mesh DIY link pleaseee

02-23-2009, 10:14 AM
been thinking about ordering some RS4 mesh. could someone put down a link for the grills DIY?? thanks

02-23-2009, 10:27 AM
Two options:

#1 - Search on the McMaster-carr.com website for the mesh that you would like (Search on AZ for the exact Part Number if you'd like)

#2 - LLtek.com has a plastic mesh that IMHO is better than the one mentioned above.

02-23-2009, 04:44 PM
does anyone know of a DIY write up? prob gunna go with the lltek

02-23-2009, 04:48 PM
I cant find it, but I think there is one on Audiworld, or maybe search the S4 forums

02-23-2009, 04:50 PM
Just search, it was posted here not too long ago

02-23-2009, 04:51 PM
Is this for an A4 bumper or S4 bumper? Procedure is different for the two.

You can take out the grills (all 3) and dremel out the fins. I would use the LLtek ABS plastic, but the Home Depot mesh works good as well (no, I don't know the part name/number). Cut the mesh to match the grill size (always leave extra when cutting the mesh, then dremel it down to a flush fit). You can use Epoxy to make the mesh adhere to the grill, and allow it to dry. Then spray it with Plasti-Dip as the Epoxy leaves an ugly color and the Plasti-dip cleans up the rough edges. This is for the A4.

02-23-2009, 05:56 PM