PDA

View Full Version : Need help on forge splitter tuning



spinner
02-07-2009, 07:12 PM
Hi Guys, I've installed a forge splitter on my 97' B5. Can anyone advise me on how to tune this DV or how many clicks u guys have ? According to manual its not very clear. Thank lots

ZacharyWS
02-07-2009, 09:02 PM
from what I understand its about your boost level....

Im running ~24psi and I have it set to MAX then backed off 3 clicks....

When I did my install it took some playing with. best bet is to set it to MAX, roll down the windows, go for a drive and stop and back it off a few clicks till you get it the way you want it

spinner
02-08-2009, 04:37 AM
from what I understand its about your boost level....

Im running ~24psi and I have it set to MAX then backed off 3 clicks....

When I did my install it took some playing with. best bet is to set it to MAX, roll down the windows, go for a drive and stop and back it off a few clicks till you get it the way you want it

thanks for the advise... i will have a go on that. By the way mine car should be on standard boost. Which i think is 15psi ? Pls correct me if I'm wrong. The only mod i have is the scopion exaust starting from cat back to tip. And i have a N75F replaced, i think thats standard as well right ?