PDA

View Full Version : Guys with NGK BKR6E's, change intervals?



sumpsfast
10-28-2004, 02:12 PM
How often do you guys change these?

skene
10-28-2004, 02:23 PM
15-20k

SFexBOY
10-28-2004, 02:31 PM
i just changed mine yesterday to the NGK BKUR6ET's

b00st
10-28-2004, 02:44 PM
i change my around 15-20k too.

sumpsfast
10-28-2004, 03:05 PM
Preciate yas!

offroader1006
10-28-2004, 03:06 PM
Originally posted by SFexBOY
i just changed mine yesterday to the NGK BKUR6ET's

why the change? mine is due for some plugs and wires.

j/w which type to get

bitterchild
10-28-2004, 06:30 PM
my bkr6es start arching past the insulator after 8k.

Daft
10-28-2004, 07:26 PM
Originally posted by SFexBOY
i just changed mine yesterday to the NGK BKUR6ET's

That's wasn't a good idea.

The BKR6E is the plug to run on a chipped car. The BKUR6ET is really no different than the OEM Bosch F7LTCR plugs. They are a 3-ground plug. This means that you have a larger gap and it's not adjustable. Look here to see what the NGK part numbers mean:

http://www.ngksparkplugs.com/techinfo/spark_plugs/partnumberkey.pdf

BTW SFexBOY, I noticed your 1.3bar x-chip in your sig. You would get the best top end out of that car with the BKR7E set to a 0.0028" gap. I swear it. Ask Evil he can attest to it.

OverSpun
10-28-2004, 07:43 PM
how much do these plugs run? i may have to get a set... 7Es that is cause i have an X chip as well.

Daft
10-28-2004, 07:58 PM
You can get them for about $2 each at any auto parts store in the US. If you're too busy to visit a store, you can get them online from here:

http://www.sparkplugs.com/results_cross.asp?pid=bkr7e

Paul_858
10-28-2004, 08:22 PM
every 5k... copper plugs.. change them with the oil

quattroanillos5
10-29-2004, 09:17 AM
WHAT HE SAID^^^^^^^