View Full Version : Need torque specs for swing arms.

09-14-2008, 11:28 AM
Did my coilovers and control arms this weekend and i took the whole swingarms off and put the control arms and took them off while they were off the car.

What are the torque specs to put my swingarms back in. The bolts that are under the hood. 3 on each side.

Thanks alot guys.

09-14-2008, 11:31 AM
Upper front; 50 Nm + 1/4 turn into mounting bracket
Upper rear; 50Nm + 1/4 turn into mounting bracket
Upper pinch bolt; 40 Nm (not TRE pinch bolt)
Lower front; 80 Nm + 1/4 turn into subframe
Lower rear; 90 Nm +1/4 turn into subframe
Lower control arms into steering knuckle; 100 Nm
Mounting bracket (shock tower assembly)
Upper bolts from inside the engine bay; 75 Nm
Lower nut and bolt into control arm; 90 Nm
Sway bar end link;
Lower connection to the sway bar; 100 Nm
Upper connection into the control arm; 40 Nm + 1/4 turn

09-14-2008, 11:33 AM