PDA

View Full Version : Brake Pad Sensor Wire Connectors?



xraycer2012
07-31-2008, 01:30 PM
I'm going to upgrade my brakes with new rotors, a8 fronts w/tt carriers and new hawk hps pads all around on my 2000 A4 2.8L QM, but I was wondering, What type of connector do I need for the sensor wires in front? On ecs tuning's webpage it shows two different types, round and square connectors. Thanks for any and all help in advance.

blmlozz
07-31-2008, 02:30 PM
just guessing but I believe the round ones are for the pre 99.5 a4's, because my 99.5 had the square looking connectors. why not just pop off one of your wheels and take a look? it's the only wire Comming out the back of the caliper

xraycer2012
07-31-2008, 08:51 PM
yea, you're right. my car does have the squarish connectors. I did end up pullng a wheel off just to be sure. The only reason I didn't do that originally was because unfortunately my dad doesn't have a floor jack, so I had to borrow my neighbor's. thanks for the help

audiness
07-31-2008, 09:06 PM
do this to your connectors and you will not have any more problems.

http://i23.photobucket.com/albums/b373/audiness/IMG_6048Large.jpg