PDA

View Full Version : JHM Shifter install help



audipotential
06-06-2008, 06:41 PM
Question for you guys. How many of you actually used that dealy in the video that measures the percent of the angle when you do the adjustment?

drexplode
06-06-2008, 07:03 PM
For my B7-A4, i did. Its $10 at a local hardware store...DO IT! Seriously, without it...it was major PIA.

m5racer
06-06-2008, 07:28 PM
anyone else got any tips when installing this shifter? its going into a B5 A4 Non push down

jm121189
06-06-2008, 08:37 PM
I was too cheap to buy the magnetic gauge so this is what I did. I cut out 2 pieces of poster board for the 2 required angles. I held the cut out parallel to a square(the tool not the shape) with a level on it and tilted the shifter until the bubble on the level was centered. I did this for both directions. If you do it this way make sure the cut out has a 90* corner on it or it won't work.